On 10/18/22 at 05:25pm, Xianting Tian wrote:
>
> 在 2022/10/18 下午5:10, Baoquan He 写道:
> > On 10/18/22 at 04:17pm, Xianting Tian wrote:
> > > Add arch_crash_save_vmcoreinfo(), which exports VM layout(MODULES, VMALLOC,
> > > VMEMMAP and KERNEL_LINK_ADDR ranges), va bits and ram base for vmcore.
> > >
> > > Default pagetable levels and PAGE_OFFSET aren't same for different kernel
> > > version as below. For pagetable levels, it sets sv57 by default and falls
> > > back to setting sv48 at boot time if sv57 is not supported by the hardware.
> > >
> > > For ram base, the default value is 0x80200000 for qemu riscv64 env and,
> > > for example, is 0x200000 on the XuanTie 910 CPU.
> > >
> > > * Linux Kernel 5.18 ~
> > > * PGTABLE_LEVELS = 5
> > > * PAGE_OFFSET = 0xff60000000000000
> > > * Linux Kernel 5.17 ~
> > > * PGTABLE_LEVELS = 4
> > > * PAGE_OFFSET = 0xffffaf8000000000
> > > * Linux Kernel 4.19 ~
> > > * PGTABLE_LEVELS = 3
> > > * PAGE_OFFSET = 0xffffffe000000000
> > >
> > > Since these configurations change from time to time and version to version,
> > > it is preferable to export them via vmcoreinfo than to change the crash's
> > > code frequently, it can simplify the development of crash tool.
> > >
> > > Signed-off-by: Xianting Tian <xianting.tian@xxxxxxxxxxxxxxxxx>
> > > ---
> > > arch/riscv/kernel/Makefile | 1 +
> > > arch/riscv/kernel/crash_core.c | 29 +++++++++++++++++++++++++++++
> > > 2 files changed, 30 insertions(+)
> > > create mode 100644 arch/riscv/kernel/crash_core.c
> > >
> > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> > > index db6e4b1294ba..4cf303a779ab 100644
> > > --- a/arch/riscv/kernel/Makefile
> > > +++ b/arch/riscv/kernel/Makefile
> > > @@ -81,6 +81,7 @@ obj-$(CONFIG_KGDB) += kgdb.o
> > > obj-$(CONFIG_KEXEC_CORE) += kexec_relocate.o crash_save_regs.o machine_kexec.o
> > > obj-$(CONFIG_KEXEC_FILE) += elf_kexec.o machine_kexec_file.o
> > > obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
> > > +obj-$(CONFIG_CRASH_CORE) += crash_core.o
> > > obj-$(CONFIG_JUMP_LABEL) += jump_label.o
> > > diff --git a/arch/riscv/kernel/crash_core.c b/arch/riscv/kernel/crash_core.c
> > > new file mode 100644
> > > index 000000000000..8d7f5ff108da
> > > --- /dev/null
> > > +++ b/arch/riscv/kernel/crash_core.c
> > > @@ -0,0 +1,29 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +
> > > +#include <linux/crash_core.h>
> > > +#include <linux/pagemap.h>
> > > +
> > > +void arch_crash_save_vmcoreinfo(void)
> > > +{
> > > + VMCOREINFO_NUMBER(VA_BITS);
> > > + VMCOREINFO_NUMBER(phys_ram_base);
> > > +
> > > + vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET);
> > > + vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
> > > + vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
> > > + vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
> > > + vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
> > > +#ifdef CONFIG_64BIT
> > > + vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
> > > + vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
> > > +#endif
> > > +
> > > + if (IS_ENABLED(CONFIG_64BIT)) {
> > > +#ifdef CONFIG_KASAN
> > > + vmcoreinfo_append_str("NUMBER(KASAN_SHADOW_START)=0x%lx\n", KASAN_SHADOW_START);
> > > + vmcoreinfo_append_str("NUMBER(KASAN_SHADOW_END)=0x%lx\n", KASAN_SHADOW_END);
> > > +#endif
> > > + vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
> > > + vmcoreinfo_append_str("NUMBER(ADDRESS_SPACE_END)=0x%lx\n", ADDRESS_SPACE_END);
> > Seems this is the firsr ARCH where kasan and kernel link/bpf space are
> > added to dump and analyze. Just curious, have you got code change to
> > make use of them to do dumping and analyze?
>
> KASAN_SHADOW_START is not used, KERNEL_LINK_ADDR is used in the crash patch set:
> https://patchwork.kernel.org/project/linux-riscv/cover/20220813031753.3097720-1-xianting.tian@xxxxxxxxxxxxxxxxx/
Oh, I would say please no. Sometime we got tons of objection when adding an
necessary one, we definitely should not add one for possible future
use.
For this kind of newly added one, we need get ack from
makedumpfile/crash utility maintainer so that we know they are necessary
to have. At least they don't oppose.
>
> I add it in case of using in furture.
>
> >
> > Thanks
> > Baoquan
>
--
Crash-utility mailing list
Crash-utility@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/crash-utility
Contribution Guidelines: https://github.com/crash-utility/crash/wiki
