----- Original Message -----
>
>
> ----- Original Message -----
> > Hi Dave
> >
> > I have experienced some problems in the bt command for ARM64. It seems that
> > the test in arm64_print_exception_frame in arm64.c if the task is running
> > in
> > 32 or 64-bit mode in userland does not work. It "always" becomes 32-bit
> > mode. Example:
> >
> > crash> bt 1
> > PID: 1 TASK: ffffffe1f90f8000 CPU: 2 COMMAND: "init"
> > #0 [ffffffe1f9103c80] __switch_to at ffffff85b6a862f8
> > #1 [ffffffe1f9103ca0] __schedule at ffffff85b7b0d9b0
> > #2 [ffffffe1f9103d00] schedule at ffffff85b7b0df28
> > #3 [ffffffe1f9103d20] schedule_hrtimeout_range_clock at ffffff85b7b11308
> > #4 [ffffffe1f9103da0] schedule_hrtimeout_range at ffffff85b7b11320
> > #5 [ffffffe1f9103db0] sys_epoll_wait at ffffff85b6c394c8
> > #6 [ffffffe1f9103e70] sys_epoll_pwait at ffffff85b6c396fc
> > #7 [ffffffe1f9103ed0] el0_svc_naked at ffffff85b6a8312c
> > PC: 00000004 LR: 00000000 SP: 00000000 PSTATE: 00000016
> > X12: 00546694 X11: 3431206c616e6769 X10: 00546338 X9: 00000000
> > X8: 00000112 X7: dfdab819254dd1e8 X6: 00000016 X5: 0000000a
> > X4: 00000031 X3: 00000008 X2: 00000000 X1: ffffffff
> > X0: 00000001
> >
> > The register values are:
> > r0: 4 r1: 7ff0b27f90
> > r2: 1 r3: ffffffff
> > r4: 0 r5: 8
> > r6: 31 r7: a
> > r8: 16 r9: dfdab819254dd1e8
> > r10: 112 r11: 0
> > r12: 546338 r13: 3431206c616e6769
> > r14: 546694 r15: 0
> > r16: 0 r17: f04245b7
> > r18: 51f2a993 r19: 5783c0
> > r20: 415254 r21: 527a5c
> > r22: 527e04 r23: ffffffff
> > r24: ffffffff r25: 576000
> > r26: 578000 r27: 578000
> > r28: 3e8 fp: 7ff0b27ec0
> > lr: 4f4f24 sp: 7ff0b27eb0
> > pc: 4fb8d4 psr: 40000000
> >
> > I have unfortunately not had the time to look for a solution, so I just want
> > to report what I have seen. The kernel running in the example above is
> > 4.4.74 and I have seen the same problem for a 4.9.40 kernel.
> >
> > Jan
>
> Yeah, even the functions that do show 64-bit user mode exception frames
> appear to have invalid contents. It looks like the pt_regs is not at the
> same fixed location on the stack where it has always been, i.e., as it gets
> set here unconditionally at the bottom of arm64_back_trace_cmd():
>
> complete_user:
> exception_frame = bt->stacktop - USER_EFRAME_OFFSET;
> arm64_print_exception_frame(bt, exception_frame, USER_MODE, ofp);
>
Jan,
I don't see the problem in anything before 4.7, and I do have a set
of 4.5 dumpfiles and an early 4.7-rc0 dumpfile that do not show the
problem. Are you sure about seeing it in a "4.4.74" kernel?
I say that because it does seem to be confluent with v4.7-rc7 commit
e19a6ee2460bdd0d0055a6029383422773f9999a that has this:
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index a307eb6..7f94755 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -117,6 +117,8 @@ struct pt_regs {
};
u64 orig_x0;
u64 syscallno;
+ u64 orig_addr_limit;
+ u64 unused; // maintain 16 byte alignment
};
Does the attached patch work for you?
Thanks,
Dave
diff --git a/arm64.c b/arm64.c
index 0ab8396..9fe0c87 100644
--- a/arm64.c
+++ b/arm64.c
@@ -393,6 +393,11 @@ arm64_init(int when)
get_symbol_data("nr_irqs", sizeof(unsigned int),
&machdep->nr_irqs);
+ if (MEMBER_EXISTS("pt_regs", "orig_addr_limit"))
+ ms->user_eframe_offset = 320;
+ else
+ ms->user_eframe_offset = 304;
+
if (!machdep->hz)
machdep->hz = 100;
@@ -608,6 +613,7 @@ arm64_dump_machdep_table(ulong arg)
fprintf(fp, " exp_entry2_start: %lx\n", ms->exp_entry2_start);
fprintf(fp, " exp_entry2_end: %lx\n", ms->exp_entry2_end);
fprintf(fp, " panic_task_regs: %lx\n", (ulong)ms->panic_task_regs);
+ fprintf(fp, " user_eframe_offset: %ld\n", ms->user_eframe_offset);
fprintf(fp, " PTE_PROT_NONE: %lx\n", ms->PTE_PROT_NONE);
fprintf(fp, " PTE_FILE: ");
if (ms->PTE_FILE)
@@ -1461,7 +1467,7 @@ arm64_stackframe_init(void)
#define KERNEL_MODE (1)
#define USER_MODE (2)
-#define USER_EFRAME_OFFSET (304)
+#define USER_EFRAME_OFFSET (machdep->machspec->user_eframe_offset)
/*
* PSR bits
diff --git a/defs.h b/defs.h
index fd97ffe..8534d40 100644
--- a/defs.h
+++ b/defs.h
@@ -3110,6 +3110,7 @@ struct machine_specific {
ulong kimage_voffset;
ulong kimage_text;
ulong kimage_end;
+ ulong user_eframe_offset;
};
struct arm64_stackframe {
diff --git a/arm64.c b/arm64.c
index 0ab8396..9fe0c87 100644
--- a/arm64.c
+++ b/arm64.c
@@ -393,6 +393,11 @@ arm64_init(int when)
get_symbol_data("nr_irqs", sizeof(unsigned int),
&machdep->nr_irqs);
+ if (MEMBER_EXISTS("pt_regs", "orig_addr_limit"))
+ ms->user_eframe_offset = 320;
+ else
+ ms->user_eframe_offset = 304;
+
if (!machdep->hz)
machdep->hz = 100;
@@ -608,6 +613,7 @@ arm64_dump_machdep_table(ulong arg)
fprintf(fp, " exp_entry2_start: %lx\n", ms->exp_entry2_start);
fprintf(fp, " exp_entry2_end: %lx\n", ms->exp_entry2_end);
fprintf(fp, " panic_task_regs: %lx\n", (ulong)ms->panic_task_regs);
+ fprintf(fp, " user_eframe_offset: %ld\n", ms->user_eframe_offset);
fprintf(fp, " PTE_PROT_NONE: %lx\n", ms->PTE_PROT_NONE);
fprintf(fp, " PTE_FILE: ");
if (ms->PTE_FILE)
@@ -1461,7 +1467,7 @@ arm64_stackframe_init(void)
#define KERNEL_MODE (1)
#define USER_MODE (2)
-#define USER_EFRAME_OFFSET (304)
+#define USER_EFRAME_OFFSET (machdep->machspec->user_eframe_offset)
/*
* PSR bits
diff --git a/defs.h b/defs.h
index fd97ffe..8534d40 100644
--- a/defs.h
+++ b/defs.h
@@ -3110,6 +3110,7 @@ struct machine_specific {
ulong kimage_voffset;
ulong kimage_text;
ulong kimage_end;
+ ulong user_eframe_offset;
};
struct arm64_stackframe {
--
Crash-utility mailing list
Crash-utility@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/crash-utility
