----- Original Message -----
> I guess I answered my own question - the answer is : NO ??
> I guess a more modern *.dwo format is being used that is not
> understood by the version of bfd used by gdb-7.6 .
> Debugging crash with gdb 7.11.1 shows BFD is getting
> the section offsets wrong :
>
> $ gdb --args crash $BLD/linux-4.10/vmlinux /proc/kcore
> GNU gdb (GDB) 7.11.1
> ...
> (gdb) b dwarf2read.c:3972
> (gdb) c
> Breakpoint 2, error_check_comp_unit_head
> (header=header@entry=0x7fffffffd078,
> abbrev_section=abbrev_section@entry=0x28c91b0, section=0x28c9290,
> section=0x28c9290) at dwarf2read.c:3972
> 3972 error (_("Dwarf Error: wrong version in compilation unit header "
> (gdb) where
> #0 error_check_comp_unit_head (header=header@entry=0x7fffffffd078,
> abbrev_section=abbrev_section@entry=0x28c91b0, section=0x28c9290,
> section=0x28c9290) at dwarf2read.c:3972
> #1 0x00000000006f1106 in read_and_check_comp_unit_head
> (header=header@entry=0x7fffffffd078, section=section@entry=0x28c9290,
> abbrev_section=abbrev_section@entry=0x28c91b0, info_ptr=0x7ffff7f4704b
> "",
> info_ptr@entry=0x7ffff7f47040 "\001", is_debug_types_section=0) at
> dwarf2read.c:4018
> #2 0x00000000006f11f2 in init_cutu_and_read_dies_no_follow
> (this_cu=this_cu@entry=0x7fffffffd270,
> abbrev_section=abbrev_section@entry=0x28c91b0,
> dwo_file=dwo_file@entry=0x28c91a0,
> die_reader_func=die_reader_func@entry=0x6f5110
> <create_dwo_debug_info_hash_table_reader>,
> data=data@entry=0x7fffffffd240) at dwarf2read.c:4829
> #3 0x00000000006f34e8 in create_dwo_debug_info_hash_table
> (dwo_file=0x28c91a0) at dwarf2read.c:8394
> #4 open_and_init_dwo_file (comp_dir=<optimized out>,
> dwo_name=0x7ffff7f4ecd4 "arch/x86/kernel/head64.dwo") at
> dwarf2read.c:8978
> #5 lookup_dwo_cutu (dwo_name=dwo_name@entry=0x7ffff7f4ecd4
> "arch/x86/kernel/head64.dwo", comp_dir=<optimized out>,
> signature=signature@entry=13748681403860065761,
> is_debug_types=is_debug_types@entry=0, this_unit=0x1f277d0)
> at dwarf2read.c:9182
> #6 0x00000000006f410f in lookup_dwo_comp_unit
> (signature=13748681403860065761, comp_dir=<optimized out>,
> dwo_name=0x7ffff7f4ecd4 "arch/x86/kernel/head64.dwo",
> this_cu=0x1f277d0) at dwarf2read.c:9237
> #7 init_cutu_and_read_dies (this_cu=this_cu@entry=0x1f277d0,
> abbrev_table=abbrev_table@entry=0x0,
> use_existing_cu=use_existing_cu@entry=0, keep=keep@entry=0,
> die_reader_func=die_reader_func@entry=0x702420
> <process_psymtab_comp_unit_reader>, data=data@entry=0x7fffffffd4ac) at
> dwarf2read.c:4656
> #8 0x00000000006f8cc8 in process_psymtab_comp_unit
> (this_cu=0x1f277d0, want_partial_unit=0) at dwarf2read.c:5053
> #9 0x0000000000709e44 in dwarf2_build_psymtabs_hard
> (objfile=<optimized out>) at dwarf2read.c:5548
> #10 dwarf2_build_psymtabs (objfile=0x1639970) at dwarf2read.c:3855
> #11 0x000000000067bc0e in require_partial_symbols
> (objfile=objfile@entry=0x1639970, verbose=verbose@entry=0) at
> psymtab.c:92
> #12 0x0000000000682644 in read_symbols
> (objfile=objfile@entry=0x1639970, add_flags=add_flags@entry=4) at
> symfile.c:862
> #13 0x00000000006819dc in syms_from_objfile_1 (add_flags=4,
> num_offsets=0, offsets=0x0, addrs=<optimized out>, objfile=0x1639970)
> at symfile.c:1045
> #14 syms_from_objfile (objfile=0x1639970, addrs=<optimized out>,
> offsets=0x0, num_offsets=0, add_flags=4) at symfile.c:1063
> #15 0x0000000000681f14 in symbol_file_add_with_addrs_or_offsets
> (abfd=abfd@entry=0x162c590, add_flags=add_flags@entry=4,
> addrs=addrs@entry=0x0, flags=flags@entry=0, parent=parent@entry=0x0,
> num_offsets=0, offsets=0x0) at symfile.c:1168
> #16 0x0000000000682085 in symbol_file_add_from_bfd
> (abfd=abfd@entry=0x162c590, add_flags=add_flags@entry=4,
> addrs=addrs@entry=0x0, flags=flags@entry=0, parent=parent@entry=0x0)
> at symfile.c:1258
> #17 0x00000000006820c8 in symbol_file_add
> (name=name@entry=0x7fffffffdd99 "/usr/build/linux/linux-4.10/vmlinux",
> add_flags=4, addrs=addrs@entry=0x0, flags=flags@entry=0) at
> symfile.c:1274
> #18 0x0000000000682113 in symbol_file_add_main_1 (args=0x7fffffffdd99
> "/usr/build/linux/linux-4.10/vmlinux", from_tty=0, flags=0) at
> symfile.c:1300
> #19 0x00000000006a6359 in catch_command_errors (command=0x682140
> <symbol_file_add_main>, arg=arg@entry=0x7fffffffdd99
> "/usr/build/linux/linux-4.10/vmlinux", from_tty=from_tty@entry=0,
> mask=mask@entry=6) at exceptions.c:584
> #20 0x00000000006a8e1d in captured_main
> (data=data@entry=0x7fffffffd8b0) at main.c:948
> #21 0x00000000006a6285 in catch_errors (func=func@entry=0x6a7d90
> <captured_main>, func_args=func_args@entry=0x7fffffffd8b0,
> errstring=errstring@entry=0x8f412a "", mask=mask@entry=6) at
> exceptions.c:557
> #22 0x00000000006a8fbb in gdb_main (args=args@entry=0x7fffffffd8b0) at
> main.c:1079
> #23 0x00000000006a9001 in gdb_main_entry (argc=<optimized out>,
> argv=argv@entry=0x7fffffffda18) at main.c:1099
> #24 0x00000000004f59af in gdb_main_loop (argc=<optimized out>,
> argc@entry=3, argv=argv@entry=0x7fffffffda18) at gdb_interface.c:76
> #25 0x0000000000464d3d in main (argc=3, argv=0x7fffffffda18) at main.c:707
>
> (gdb) p *header
> $3 = {length = 1, version = 0, addr_size = 0 '\000', signed_addr_p = 0
> '\000', abbrev_offset = {sect_off = 2890530816}, offset_size = 4,
> initial_length_size = 4, offset = {sect_off = 0}, first_die_offset =
> {cu_off = 11}}
>
> we genuinely have a bad header here, because bfd seems to have got the
> section offsets wrong:
>
> If I do:
>
> $ objdump -fh head64.o
>
> head64.o: file format elf64-x86-64
> architecture: i386:x86-64, flags 0x00000011:
> HAS_RELOC, HAS_SYMS
> start address 0x0000000000000000
>
> Sections:
> ...
> Idx Name Size VMA LMA File off
> Algn
> 11 .debug_info 00000034 0000000000000000 0000000000000000 00000593
> 2**0
> CONTENTS, RELOC, READONLY, DEBUGGING
> 12 .debug_abbrev 0000001d 0000000000000000 0000000000000000 000005c7
> 2**0
> CONTENTS, READONLY, DEBUGGING
> ...
>
> So the .debug_info section we are looking at should begin at file
> offset 0x593 = 1427, right ?
>
> But the bfd has the section offsets wrong :
>
> (gdb) p *section->asection
> $40 = {name = 0x28c2ba3 ".debug_info.dwo", id = 139, index = 0, next =
> 0x28c2f70, prev = 0x0, flags = 41224, user_set_vma = 1, linker_mark =
> 0, linker_has_input = 0, gc_mark = 0, compress_status = 0,
> segment_mark = 0, sec_info_type = 0,
> use_rela_p = 1, sec_flg0 = 0, sec_flg1 = 0, sec_flg2 = 0, sec_flg3 =
> 0, sec_flg4 = 0, sec_flg5 = 0, vma = 0, lma = 0, size = 28569, rawsize
> = 0, compressed_size = 0, relax = 0x0, relax_count = 0, output_offset
> = 0,
> output_section = 0x0, alignment_power = 0, relocation = 0x0,
> orelocation = 0x0, reloc_count = 0, filepos = 64, rel_filepos = 0,
> line_filepos = 0, userdata = 0x28c53d8, contents = 0x0, lineno = 0x0,
> lineno_count = 0, entsize = 0,
> kept_section = 0x0, moving_line_filepos = 0, target_index = 0,
> used_by_bfd = 0x28c2c10, constructor_chain = 0x0, owner = 0x2465c10,
> symbol = 0x28c2ce8, symbol_ptr_ptr = 0x28c2f38, map_head = {link_order
> = 0x0, s = 0x0}, map_tail = {
> link_order = 0x0, s = 0x0}}
>
> 'filepos=64' does not correspond to any section header offset or section
> offset
> in the file .
>
> Oh well, I'll just have to rebuild kernel without
> CONFIG_DEBUG_INFO_SPLIT=y / CONFIG_DEBUG_INFO_DWARF4=y
> .
> This is a shame - the massive decrease in overall build size makes
> building kernels
> a much less daunting task on my limited storage machine .
> I hope crash's bfd is upgraded to handle the modern .dwo format from gcc
> 5.4.0 +
> binutils-2.27 soon.
> Is crash ever going to migrate to gdb-7.11.1+ ?
>
> Regards,
> Jason
>
> On 23/02/2017, Jason Vas Dias <jason.vas.dias@xxxxxxxxx> wrote:
> > Hi -
> > I have these kernel config options set for a successful kernel build :
> >
> > $ grep DEBUG_INFO .config
> > CONFIG_DEBUG_INFO=y
> > # CONFIG_DEBUG_INFO_REDUCED is not set
> > CONFIG_DEBUG_INFO_SPLIT=y
> > CONFIG_DEBUG_INFO_DWARF4=y
> >
> > This splits debug_info sections into separate ${X}.dwo files for each
> > kernel
> > object produced.
> >
> > I modified several files and did a 'make bzImage' , which succeeded,
> > and installed the kernel, and tried to run crash-7.1.8 to inspect a
> > few things, but it says:
> > <quote><pre>
> > $ crash vmlinuz /proc/kcore
> > ....
> > gdb called without error_hook: Dwarf Error: wrong version in
> > compilation unit header (is 0, should be 2, 3, or 4) [in module
> > /usr/build/linux/linux-4.10/arch/x86/kernel/head64.dwo]
> > Dwarf Error: wrong version in compilation unit header (is 0, should be
> > 2, 3, or 4) [in module
> > /usr/build/linux/linux-4.10/arch/x86/kernel/head64.dwo]
> >
> > crash: vmlinux: no debugging data available
> > </pre></quote>
> >
> > But the files still exist from the build:
> > -rw-r--r-- 1 root root 47784 Feb 21 20:07
> > /usr/build/linux/linux-4.10/arch/x86/kernel/head64.dwo
> > -rw-r--r-- 1 root root 17072 Feb 21 20:07
> > /usr/build/linux/linux-4.10/arch/x86/kernel/head64.o
> > in the same directory as the head64.c file .
> >
> > I thought the whole point of 'vmlinux' was that it contained the debug_info
> > ?
> > Do I need to re-link a vmlinux.dbg with all the *.dwo files
> > corresponding to each '*.o' file vmlinux contains , and vmlinux?
> > If so, then I don't see much point in the 'CONFIG_DEBUG_INFO_SPLIT=y'
> > option. Shouldn't a 'vmlinux.dwo' file be produced, containing all
> > concatenated
> > debug_info sections for 'vmlinux' ?
> > I guess crash just doesn't support
> > CONFIG_DEBUG_INFO_SPLIT=y / CONFIG_DEBUG_INFO_DWARF4=y ?
CONFIG_DEBUG_INFO_DWARF4 is supported, but as you found out, CONFIG_DEBUG_INFO_SPLIT
is not.
The version of gdb in crash will eventually be updated when it's absolutely
necessary, but there are no current plans to do so. For example, it was
forced to be upgraded to gdb-7.3.1 when kernels started being built with
gcc-4.6.1, which defaulted to using -gdwarf-4. The upgrade to gdb-7.6 was
forced for arm64 support. Unfortunately the upgrade is not a particularly
trivial task.
Dave
--
Crash-utility mailing list
Crash-utility@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/crash-utility
