Download from: http://people.redhat.com/anderson or https://github.com/crash-utility/crash/releases The master branch serves as a development branch that will contain all patches that are queued for the next release: $ git clone git://github.com/crash-utility/crash.git Changelog: - Fix for the "crash --osrelease" option for flattened format dumpfiles in the unlikely event that the dumpfile header does not contain the VMCOREINFO note section from the original ELF /proc/vmcore. Without the patch, the command displays nothing instead of showing "unknown". (anderson@xxxxxxxxxx) - Fix for the "kmem -s <address>", "bt -F[F]", and "rd -S[S]" options in kernels configured with CONFIG_SLUB. Without the patch, if a referenced slab object address comes from a slab cache that utilizes a multiple-page slab, and the object is located within a tail page of that slab cache, it will not be recognized as a slab object. The "bt -F[F]" and "rd -S[S]" options will just show the object address, and the "kmem -s <address>" object will indicate "kmem: address is not allocated in slab subsystem: <address>". This bug is a regression that was introduced in crash-7.1.0 by commit 8b2cb365d7fb139e77cedd80d4061332099ed382, which addressed a bug where stale slab object addresses were incorrectly being recognized as valid slab objects. (anderson@xxxxxxxxxx) - Fix for a segmentation violation generated by the ARM64 "bt -[f|F]" options when analyzing the active tasks in vmcores generated by the kdump facility. This bug is a regression that was introduced in crash-7.1.2 by commit 15a58e4070486efa2aa965bdd636626e62b65cc7, which was an enhancement of the ARM64 backtrace capability for active tasks in kdump vmcores. (anderson@xxxxxxxxxx) - Fix for the extensions/trace.c extension module to account for kernels that are not configured with CONFIG_TRACE_MAX_TRACER. Without the patch, the module fails to load with the error message "failed to init the offset, struct: trace_array, member: max_offset". (rabinv@xxxxxxxx) - If a kdump dumpfile is marked as incomplete in its ELF or compressed kdump header, and the user has not used the --zero_excluded command line option, append a note to the incomplete dump WARNING message shown during invocation that suggests the use of --zero_excluded. (zhouwj-fnst@xxxxxxxxxxxxxx) - Fix for the RSS value displayed by the "ps" command in Linux 2.6.34 and later big-endian machines. Without the patch, a task's RSS value will be erroneously calculated by using twice its file pages instead of adding its file pages with its anonymous pages. (anderson@xxxxxxxxxx) - Do not search for a panic task in s390x dumpfiles that are marked as a "live dump" by the "zgetdump" facility. Without the patch, an exhaustive, unnecessary, search of all kernel stacks that looks for evidence of a system crash may find an invalid reference in a task's kernel stack due to the common zero-based user and kernel virtual address space ranges of the s390x, causing the task to be mistakenly set as the "PANIC" task. (holzheu@xxxxxxxxxxxxxxxxxx, anderson@xxxxxxxxxx) - Mark the "crash" task that generated a snapshot vmcore utilizing the the "snap.so" extension module as "(ACTIVE)" in the STATE field of the initial system banner and the "set" command. Without the patch, the task's STATE field shows it as the "(PANIC)" task. (anderson@xxxxxxxxxx) - Second part of: Do not search for a panic task in s390x dumpfiles that are marked as a "live dump" by the "zgetdump" facility... The first part prevented a search of the active tasks; this part prevents the last-ditch search of all tasks. (anderson@xxxxxxxxxx) - When searching all kernel stacks for evidence of a panic task in "live" s390x dumpfiles created by the VMDUMP, stand-alone dump, or "virsh dump" facilities, none of which explicitly mark the dumpfile as a "live dump", run a standard "bt" backtrace on each kernel stack instead of the text-address-only "bt -t". Without the patch, an invalid text reference may be found in a task's kernel stack due to the common zero-based user and kernel virtual address space ranges of the s390x, causing the task to be mistakenly set as the "PANIC" task. (holzheu@xxxxxxxxxxxxxxxxxx) - Introduction of the "dis -f <address>" option, which disassembles from the target address until the end of the function. (atomlin@xxxxxxxxxx) - Fix for the ARM64 "dis" command to prevent branch target addresses from being displayed as kernel system call alias/wrapper names, for example, "SyS_read+<offset>" instead of "sys_read+<offset>". (anderson@xxxxxxxxxx) - Fix for the PPC64 "dis" command to prevent conditional branch target addresses from being displayed as kernel system call alias/wrapper names, for example, "SyS_read+<offset>" instead of "sys_read+<offset>". (anderson@xxxxxxxxxx) - Fix for the S390X "dis" command to prevent jump target addresses from being displayed as kernel system call alias/wrapper names, for example, "SyS_read+<offset>" instead of "sys_read+<offset>". (anderson@xxxxxxxxxx) - Fix for the "dis" command on architectures with variable-length instructions. Without the patch, "dis [-f] <function>" may continue beyond the end of a function, disassembling the memory that is in between the target function and the next function. For kernel module functions, the module's debuginfo data must be loaded. (anderson@xxxxxxxxxx) - Minor cleanup and error handling fix-up for the "dis" command. Without the patch, if the target address of "dis -r" or "dis -f" is not an exact address of an instruction, "dis -r" will continue beyond the target address, and "dis -f" will show nothing. (anderson@xxxxxxxxxx) - Reduce the unnecessary error messages if a directory is used as a command line argument. Without the patch, six error messages are displayed: crash: unable to read dump file /tmp /tmp: ELF header read: Is a directory /tmp: ELF header read: Is a directory crash: /tmp: read: Is a directory read_maps: unable to read header from /tmp, errno = 1 crash: vmw: Failed to read '/tmp': [Error 21] Is a directory With the patch applied, the functions that generate those messages are not called; only the standard "not a supported file format", and "Usage" messages will be displayed. (anderson@xxxxxxxxxx) - If the method of determining how compound pages are linked cannot be accomplished due to page struct related changes in upstream kernels, issue a WARNING message during session initialization. (anderson@xxxxxxxxxx) - Fix for the "timer" command on Linux 4.2 and later kernels, which contain this kernel commit that modifies the tvec_root and tvec data structures: commit bc7a34b8b9ebfb0f4b8a35a72a0b134fd6c5ef50 timer: Use hlist for the timer wheel hash buckets Without the patch, the "timer" command will spew messages indicating "timer: invalid list entry: 0", followed by "timer: ignoring faulty timer list at index <number> of timer array". (anderson@xxxxxxxxxx) - Introduction of the "dis -s <address>" option, which displays the filename and line number that is associated with the specified text location, followed by a source code listing if it is available on the host machine. The line associated with the text location will be marked with an asterisk; depending upon gdb's internal "listsize" variable, several lines will precede the marked location. If a "count" argument is entered, it specifies the number of source code lines to be displayed after the marked location; otherwise the remaining source code of the containing function will be displayed. (anderson@xxxxxxxxxx) - Added a new "--src <directory>" command line option for use by the "dis -s" option if the kernel source code is not located in the standard location that is compiled into the kernel's debuginfo data. The directory argument should point to the top-level directory of the kernel source tree. (anderson@xxxxxxxxxx) -- Crash-utility mailing list Crash-utility@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/crash-utility
