Hi,
I encountered a problem on getting backtrace with a `virsh dump' dumped
kvm dumpfile, the bt command did not get kernel backtrace properly.
guest kernel: 2.6.32
crash: 5.0.6 patched with qemu_ram_version_4.patch(attached)
steps to get dumpfile:
1. virsh start vm
2. connect to vm, say by vnc
3. On guest, build and run the code:
int main(void)
{
while (1);
return 0;
}
4. On host, run `virsh dump vm /mnt/data/kernel-2.6.32.dump3-userspace-endless-loop'
Then run crash:
crash /mnt/data/kernel/linux-2.6.32/System.map /mnt/data/kernel/linux-2.6.32/vmlinux /mnt/data/kernel-2.6.32.dump3-userspace-endless-loop
got the result:
crash 5.0.6
Copyright (C) 2002-2010 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for details.
GNU gdb (GDB) 7.0
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu"...
SYSTEM MAP: /mnt/data/kernel/linux-2.6.32/System.map
DEBUG KERNEL: /mnt/data/kernel/linux-2.6.32/vmlinux (2.6.32)
DUMPFILE: /mnt/data/kernel-2.6.32.dump3-userspace-endless-loop
CPUS: 1
DATE: Fri Aug 27 05:18:12 2010
UPTIME: 00:00:51
LOAD AVERAGE: 0.44, 0.11, 0.03
TASKS: 67
NODENAME: localhost.localdomain
RELEASE: 2.6.32
VERSION: #2 SMP PREEMPT Wed Aug 25 15:26:48 CST 2010
MACHINE: x86_64 (2925 Mhz)
MEMORY: 511.6 MB
PANIC: "Oops: 0003 [#1] PREEMPT SMP " (check log for details)
PID: 0
COMMAND: "swapper"
TASK: ffffffff8158df70 [THREAD_INFO: ffffffff8154e000]
CPU: 0
STATE: TASK_RUNNING
WARNING: panic task not found
crash> bt
PID: 0 TASK: ffffffff8158df70 CPU: 0 COMMAND: "swapper"
#0 [ffffffff8154fe28] schedule at ffffffff8138baa3
bt: invalid kernel virtual address: 41 type: "call byte"
bt: invalid kernel virtual address: 44e6835ad type: "call byte"
bt: load_memfile_offset: read: Success
bt: read error: kernel virtual address: fffffffffffffffc type: "call byte"
bt: invalid kernel virtual address: e7ab type: "call byte"
bt: invalid kernel virtual address: e273 type: "call byte"
bt: invalid kernel virtual address: 13a7b type: "call byte"
bt: invalid kernel virtual address: 935cb type: "call byte"
bt: load_memfile_offset: read: Success
bt: read error: kernel virtual address: fffffffffffffffb type: "call byte"
bt: invalid kernel virtual address: 935cb type: "call byte"
#1 [ffffffff8154fef0] cpu_idle at ffffffff8100ad1e
crash>
Note the output of `bt' command. Without running that endless-loop code then
`bt' got:
crash> bt
PID: 0 TASK: ffffffff8158df70 CPU: 0 COMMAND: "swapper"
#0 [ffffffff8154fe28] schedule at ffffffff8138baa3
#1 [ffffffff8154fe48] apic_timer_interrupt at ffffffff8100c65e
#2 [ffffffff8154fed0] need_resched at ffffffff810125a8
#3 [ffffffff8154fee0] default_idle at ffffffff81012e03
#4 [ffffffff8154fef0] cpu_idle at ffffffff8100acd6
crash>
Any suggestions on how to solve the problem?
Regards,
Hu Tao
--- crash-5.0.0/qemu-load.c.orig
+++ crash-5.0.0/qemu-load.c
@@ -169,6 +169,7 @@ get_qemu128 (FILE *fp, union qemu_uint12
#define RAM_SAVE_FLAG_MEM_SIZE 0x04
#define RAM_SAVE_FLAG_PAGE 0x08
#define RAM_SAVE_FLAG_EOS 0x10
+#define RAM_SAVE_FLAG_CONTINUE 0x20
#define RAM_SAVE_ADDR_MASK (~4095LL)
#define RAM_OFFSET_COMPRESSED (~(off_t)255)
@@ -192,24 +193,63 @@ ram_alloc (struct qemu_device_ram *dram,
dram->last_ram_offset = size;
}
+static int
+get_string (FILE *fp, char *name)
+{
+ size_t items;
+ int sz = (uint8_t) getc (fp);
+ if (sz == EOF)
+ return -1;
+ items = fread (name, sz, 1, fp);
+ name[sz] = 0;
+ return sz;
+}
+
+static void
+ram_read_blocks (FILE *fp, uint64_t size)
+{
+ char name[257];
+ /* The RAM block table is a list of block names followed by
+ their sizes. Read it until the sizes sum up to SIZE bytes. */
+ while (size) {
+ get_string (fp, name);
+ size -= get_be64 (fp);
+ }
+}
+
static uint32_t
ram_load (struct qemu_device *d, FILE *fp, enum qemu_save_section sec)
{
+ char name[257];
struct qemu_device_ram *dram = (struct qemu_device_ram *)d;
uint64_t header;
- do {
+ for (;;) {
uint64_t addr;
off_t entry;
header = get_be64 (fp);
+ if (feof (fp) || ferror (fp))
+ return 0;
+ if (header & RAM_SAVE_FLAG_EOS)
+ break;
+
assert (!(header & RAM_SAVE_FLAG_FULL));
addr = header & RAM_SAVE_ADDR_MASK;
- if (header & RAM_SAVE_FLAG_MEM_SIZE)
+
+ if (header & RAM_SAVE_FLAG_MEM_SIZE) {
ram_alloc (dram, addr);
+ if (d->version_id >= 4)
+ ram_read_blocks(fp, addr);
+ continue;
+ }
+
+ if (d->version_id >= 4 && !(header & RAM_SAVE_FLAG_CONTINUE)
+ && !(header & RAM_SAVE_FLAG_EOS))
+ get_string(fp, name);
- else if (header & RAM_SAVE_FLAG_COMPRESS) {
+ if (header & RAM_SAVE_FLAG_COMPRESS) {
// dram->offsets[addr / 4096] =
entry = RAM_OFFSET_COMPRESSED | getc(fp);
store_mapfile_offset(addr, &entry);
@@ -220,8 +260,7 @@ ram_load (struct qemu_device *d, FILE *f
store_mapfile_offset(addr, &entry);
fseek (fp, 4096, SEEK_CUR);
}
-
- } while (!(header & RAM_SAVE_FLAG_EOS) && !feof (fp) && !ferror (fp));
+ }
dram->fp = fp;
return QEMU_FEATURE_RAM;
@@ -264,7 +303,7 @@ ram_init_load (struct qemu_device_list *
ram_free
};
- assert (version_id == 3);
+ assert (version_id == 3 || version_id == 4);
kvm->mapinfo.ram_version_id = version_id;
return device_alloc (dl, sizeof (struct qemu_device_ram),
&ram, section_id, instance_id, version_id);
@@ -780,19 +819,13 @@ device_get (const struct qemu_device_loa
char name[257];
uint32_t section_id, instance_id, version_id;
// bool live;
- size_t items;
- int sz;
section_id = get_be32 (fp);
if (sec != QEMU_VM_SECTION_START &&
sec != QEMU_VM_SECTION_FULL)
return device_find (dl, section_id);
- sz = getc (fp);
- if (sz == EOF)
- return NULL;
- items = fread (name, sz, 1, fp);
- name[sz] = 0;
+ get_string(fp, name);
instance_id = get_be32 (fp);
version_id = get_be32 (fp);
--
Crash-utility mailing list
Crash-utility@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/crash-utility
