On Fri, Jul 27, 2007 at 09:18:33AM +0200, Bernhard Walle wrote:
> * Cliff Wickman <cpw@xxxxxxx> [2007-07-27 04:17]:
> >
> > Must be a configuration issue.
> > Maybe involving some combination of CONFIG_KEXEC and CONFIG_CRASH_DUMP.
> > But I don't see how those can affect disk discovery.
>
> Can you point us to the boot log (serial console)?
Below is the log for the failure, Below that is a succeeding case,
i.e. discovery by a non-capture kernel.
>
>
> Thanks,
> Bernhard
--------------------- failing to discover /dev/sdb:
frau:/tmp/cpw # echo c > /proc/sysrq-trigger
SysRq : Trigger a crashdump
Bootdata ok (command line is CRASH=1 root=/dev/sdb3 console=ttyS0,38400n8 1 memmap=exactmap memmap=640K@0K memmap=3404K@16384K memmap=127012K@20428K elfcorehdr=147440K memmap=56K#1048512K memmap=8K#1048568K)
Linux version 2.6.16.46-0.12-kdump (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #1 Thu May 17 14:00:09 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fffe000 (ACPI data)
BIOS-e820: 000000003fffe000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
user-defined physical RAM map:
user: 0000000000000000 - 00000000000a0000 (usable)
user: 0000000001000000 - 0000000001353000 (usable)
user: 00000000013f3000 - 0000000008ffc000 (usable)
user: 000000003fff0000 - 000000003fffe000 (ACPI data)
user: 000000003fffe000 - 0000000040000000 (ACPI data)
DMI 2.3 present.
>>> ERROR: Invalid checksum
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
Built 1 zonelists
Kernel command line: CRASH=1 root=/dev/sdb3 console=ttyS0,38400n8 1 memmap=exactmap memmap=640K@0K memmap=3404K@16384K memmap=127012K@20428K elfcorehdr=147440K memmap=56K#1048512K memmap=8K#1048568K
Initializing CPU#0
PID hash table entries: 512 (order: 9, 16384 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2010.336 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Checking aperture...
CPU 0: aperture @ d0000000 size 256 MB
CPU 1: aperture @ d0000000 size 256 MB
Nosave address range: 00000000000a0000 - 0000000001000000
Nosave address range: 0000000001353000 - 00000000013f3000
Memory: 122072k/147440k available (1763k kernel code, 8828k reserved, 785k data, 180k init)
Calibrating delay using timer specific routine.. 4024.93 BogoMIPS (lpj=8049871)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Opteron(tm) Processor 246 stepping 01
checking if image is initramfs... it is
Freeing initrd memory: 3198k freed
not found!
Using local APIC timer interrupts.
result 12564618
Detected 12.564 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Root Bridge [PCIB] (0000:06)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 *19)
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 *18 19)
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 *22)
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs *20 21 22)
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 *22)
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 *21 22)
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *0, disabled.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fc700000-fe7fffff
PREFETCH window: 50000000-500fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: ff300000-ff3fffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: ff400000-ff4fffff
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:06:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:06:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1185399988.020:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
ACPI wakeup devices:
USB0 USB1 P0P1 P0P2 NIC1 P0P3 P0P4 NIC2 P0P5 GOLA GOLB
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 180k freed
Starting udevd
Creating devices
Loading ide-core
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Loading ide-disk
Loading scsi_mod
SCSI subsystem initialized
Loading sd_mod
Loading libata
Loading ahci
Loading ata_piix
Loading scsi_transport_sas
LoadFusion MPT base driver 3.04.02-suse
ing mptbase
Copyright (c) 1999-2005 LSI Logic Corporation
Loading mptscsih
Loading mptsasFusion MPT SAS Host driver 3.04.02-suse
Loading megaraidmegasas: 00.00.03.05-SL1 Mon Feb 12 12:15:30 PST 2007
_sas
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 217
sata_nv 0000:00:07.0: Using ADMA mode
ata1: SATA max UDMA/133 cmd 0xFFFFC2000001C480 ctl 0xFFFFC2000001C4A0 bmdma 0xD000 irq 217
ata2: SATA max UDMA/133 cmd 0xFFFFC2000001C580 ctl 0xFFFFC2000001C5A0 bmdma 0xD008 irq 217
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Vendor: ATA Model: ST3120813AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 21 (level, low) -> IRQ 225
sata_nv 0000:00:08.0: Using ADMA mode
ata3: SATA max UDMA/133 cmd 0xFFFFC2000001E480 ctl 0xFFFFC2000001E4A0 bmdma 0xBC00 irq 225
ata4: SATA max UDMA/133 cmd 0xFFFFC2000001E580 ctl 0xFFFFC2000001E5A0 bmdma 0xBC08 irq 225
scsi2 : sata_nv
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
Loading ide-generic
hda: DV-28E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Loading processor
Loading thermal
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Loading edd
EDD information not available.
Loading piix
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
NFORCE-CK804: port 0x01f0 already claimed by ide0
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Loading xfs
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Loading jbd
Loading ext3
Waiting for device /dev/sdb3 to appear: ..............................not found -- exiting to /bin/sh
$
--------------------- succeeding discovery of /dev/sdb:
Booting the (non-dumping) 2.6.22 kernel proceeds as:
Linux version 2.6.22.1-dirty (cpw@spandau) (gcc version 4.1.0 (SUSE Linux)) #20 SMP Wed Jul 25 15:56:05 CDT 2007 10 SP1
Command line: root=/dev/sdb3 vga=normal kdb=on resume=/dev/sda4 crashkernel=128M@16M console=ttyS0,38400n8 splash=silent showopts
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)-----------
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)ghted.
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)he
BIOS-e820: 000000003fff0000 - 000000003fffe000 (ACPI data)
BIOS-e820: 000000003fffe000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F8140, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFF0000, 0034 (r1 A M I OEMRSDT 3000617 MSFT 97)
ACPI: FACP 3FFF0200, 0084 (r2 A M I OEMFACP 3000617 MSFT 97)
ACPI: DSDT 3FFF0470, 4732 (r1 TUNA_ TUNA_150 150 INTL 2002026)
ACPI: FACS 3FFFE000, 0040
ACPI: APIC 3FFF0390, 0084 (r1 A M I OEMAPIC 3000617 MSFT 97)
ACPI: SPCR 3FFF0420, 0050 (r1 A M I OEMSPCR 3000617 MSFT 97)
ACPI: OEMB 3FFFE040, 0063 (r1 A M I AMI_OEM 3000617 MSFT 97)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 MemBase 0000000000000000 Limit 000000003fff0000
Skipping disabled node 1
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003fff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 158
0: 256 -> 262128
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 4, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 38000 bytes of per cpu data
Built 1 zonelists. Total pages: 256395
Kernel command line: root=/dev/sdb3 vga=normal kdb=on resume=/dev/sda4 crashkernel=128M@16M console=ttyS0,38400n8 splash=silent showopts
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2010.316 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ d0000000 size 256 MB
CPU 1: aperture @ d0000000 size 256 MB
Memory: 891496k/1048512k available (4368k kernel code, 156624k reserved, 2399k data, 340k init)
Calibrating delay using timer specific routine.. 4023.11 BogoMIPS (lpj=8046226)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12564494
Detected 12.564 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4020.87 BogoMIPS (lpj=8041751)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
AMD Opteron(tm) Processor 246 stepping 01
Brought up 2 CPUs
migration_cost=481
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Root Bridge [PCIB] (0000:06)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *3
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0xa00-0xa3f has been reserved
pnp: 00:08: iomem range 0xffb80000-0xfffffffe could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0b: iomem range 0xc0000-0xdffff has been reserved
pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0b: iomem range 0x100000-0x3fffffff could not be reserved
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fc700000-fe7fffff
PREFETCH window: 50000000-500fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: ff300000-ff3fffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: ff400000-ff4fffff
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:06:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:06:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2488k freed
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:06:01.0 subordinate bus.
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:06:02.0 subordinate bus.
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:a0:d1:e4:f6:ea
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 18
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:a0:d1:e4:f6:eb
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: DV-28E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Adaptec aacraid driver (1.1-5[2437]-mh4)
QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.12
Copyright(c) 2004-2007 Emulex. All rights reserved.
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
st: Version 20070203, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:07.0: Using ADMA mode
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xffffc200005d4480 ctl 0xffffc200005d44a0 bmdma 0x000000000001d000 irq 22
ata2: SATA max UDMA/133 cmd 0xffffc200005d4580 ctl 0xffffc200005d45a0 bmdma 0x000000000001d008 irq 22
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3120813AS, 3.AAH, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
ata2.00: 390721968 sectors, multi 16: LBA48
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3120813AS 3.AA PQ: 0 ANSI: 5
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: Using ADMA mode
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xffffc200005d6480 ctl 0xffffc200005d64a0 bmdma 0x000000000001bc00 irq 21
ata4: SATA max UDMA/133 cmd 0xffffc200005d6580 ctl 0xffffc200005d65a0 bmdma 0x000000000001bc08 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeaffc00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hub 1-0:1.0: over-current change on port 9
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfeafe000
hub 1-0:1.0: over-current change on port 10
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0f12:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Opteron(tm) Processor 246 processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[7]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[14]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[21]: defcmd archkdbcommon "" "Common arch debugging"
Freeing unused kernel memory: 340k freed
Trying manual resume from /dev/sda4
Starting udevd
Creating devices
Waiting for device /dev/sdb3 to appear: ok
rootfs: major=8 minor=19 devn=2067
fsck 1.38 (30-Jun-2005)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sdb3
/dev/sdb3: recovering journal
/dev/sdb3: Clearing orphaned inode 440134 (uid=0, gid=0, mode=0100600, size=217016)
/dev/sdb3 has been mounted 36 times without being checked, check forced.
...
--
Crash-utility mailing list
Crash-utility@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/crash-utility
