[PATCH] ASoC: cs35l41: check the return value from spi_setup()

[Vitaliy Shevtsov <v.shevtsov@xxxxxxxxxxxxxxxxx>]

Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.

Handle spi_setup() return value.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Fixes: 872fc0b6bde8 ("ASoC: cs35l41: Set the max SPI speed for the whole device")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@xxxxxxxxxxxxxxxxx>
---
 sound/soc/codecs/cs35l41-spi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs35l41-spi.c b/sound/soc/codecs/cs35l41-spi.c
index a6db44520c06..f9b6bf7bea9c 100644
--- a/sound/soc/codecs/cs35l41-spi.c
+++ b/sound/soc/codecs/cs35l41-spi.c
@@ -32,13 +32,16 @@ static int cs35l41_spi_probe(struct spi_device *spi)
 	const struct regmap_config *regmap_config = &cs35l41_regmap_spi;
 	struct cs35l41_hw_cfg *hw_cfg = dev_get_platdata(&spi->dev);
 	struct cs35l41_private *cs35l41;
+	int ret;
 
 	cs35l41 = devm_kzalloc(&spi->dev, sizeof(struct cs35l41_private), GFP_KERNEL);
 	if (!cs35l41)
 		return -ENOMEM;
 
 	spi->max_speed_hz = CS35L41_SPI_MAX_FREQ;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
 
 	spi_set_drvdata(spi, cs35l41);
 	cs35l41->regmap = devm_regmap_init_spi(spi, regmap_config);
-- 
2.48.1