[PATCH v2 01/20] ASoC: dt-bindings: Add document for mt6359-accdet

[Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>]

Add dt-binding for the MT6359 ACCDET hardware block.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
 .../bindings/sound/mediatek,mt6359-accdet.yaml     | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt6359-accdet.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt6359-accdet.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d08a79301409374714c76135b061e20e8e8acfaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt6359-accdet.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt6359-accdet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6359 Accessory Detection
+
+maintainers:
+  - Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
+
+description: |
+  The MT6359 Accessory Detection block is part of the MT6359 PMIC and allows
+  detecting audio jack insertion and removal, as well as identifying the type of
+  events connected to the jack.
+
+properties:
+  compatible:
+    const: mediatek,mt6359-accdet
+
+  mediatek,hp-eint-high:
+    type: boolean
+    description:
+      By default, the HP_EINT pin is assumed to be pulled high and connected to
+      a normally open 3.5mm jack. Plug insertion is detected when the pin is
+      brought low in that case. Add this property if the behavior should be
+      inverted, for example if a normally closed 3.5mm jack is used, or if the
+      line is pulled low on open.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    accdet: accdet {
+        compatible = "mediatek,mt6359-accdet";
+        mediatek,hp-eint-high;
+    };

-- 
2.48.1