In order to allow userspace/applications know about USB offloading status,
expose a sound kcontrol that fetches information about which sound card
and PCM index the USB device is mapped to for supporting offloading. In
the USB audio offloading framework, the ASoC BE DAI link is the entity
responsible for registering to the SOC USB layer.
It is expected for the USB SND offloading driver to add the kcontrol to the
sound card associated with the USB audio device. An example output would
look like:
tinymix -D 1 get 'USB Offload Playback Route PCM#0'
-1, -1 (range -1->255)
This example signifies that there is no mapped ASoC path available for the
USB SND device.
tinymix -D 1 get 'USB Offload Playback Route PCM#0'
0, 0 (range -1->255)
This example signifies that the offload path is available over ASoC sound
card index#0 and PCM device#0.
The USB offload kcontrol will be added in addition to the existing
kcontrols identified by the USB SND mixer. The kcontrols used to modify
the USB audio device specific parameters are still valid and expected to be
used. These parameters are not mirrored to the ASoC subsystem.
Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
sound/usb/Kconfig | 10 ++
sound/usb/qcom/Makefile | 4 +
sound/usb/qcom/mixer_usb_offload.c | 158 +++++++++++++++++++++++++++++
sound/usb/qcom/mixer_usb_offload.h | 17 ++++
sound/usb/qcom/qc_audio_offload.c | 2 +
5 files changed, 191 insertions(+)
create mode 100644 sound/usb/qcom/mixer_usb_offload.c
create mode 100644 sound/usb/qcom/mixer_usb_offload.h
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 6daa551738da..7d8833945711 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -176,9 +176,19 @@ config SND_BCD2000
To compile this driver as a module, choose M here: the module
will be called snd-bcd2000.
+config SND_USB_QC_OFFLOAD_MIXER
+ tristate "Qualcomm USB Audio Offload mixer control"
+ help
+ Say Y to enable the Qualcomm USB audio offloading mixer controls.
+ This exposes an USB offload capable kcontrol to signal to
+ applications about which platform sound card can support USB
+ audio offload. The returning values specify the mapped ASoC card
+ and PCM device the USB audio device is associated to.
+
config SND_USB_AUDIO_QMI
tristate "Qualcomm Audio Offload driver"
depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && USB_XHCI_SIDEBAND && SND_SOC_USB
+ select SND_USB_OFFLOAD_MIXER
help
Say Y here to enable the Qualcomm USB audio offloading feature.
diff --git a/sound/usb/qcom/Makefile b/sound/usb/qcom/Makefile
index 1eb51160e2e5..1efe1b90be7a 100644
--- a/sound/usb/qcom/Makefile
+++ b/sound/usb/qcom/Makefile
@@ -1,2 +1,6 @@
snd-usb-audio-qmi-y := usb_audio_qmi_v01.o qc_audio_offload.o
obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
+
+ifneq ($(CONFIG_SND_USB_QC_OFFLOAD_MIXER),)
+snd-usb-audio-qmi-y += mixer_usb_offload.o
+endif
diff --git a/sound/usb/qcom/mixer_usb_offload.c b/sound/usb/qcom/mixer_usb_offload.c
new file mode 100644
index 000000000000..26c29379e0a6
--- /dev/null
+++ b/sound/usb/qcom/mixer_usb_offload.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/soc-usb.h>
+
+#include "../usbaudio.h"
+#include "../card.h"
+#include "../helper.h"
+#include "../mixer.h"
+
+#include "mixer_usb_offload.h"
+
+#define PCM_IDX(n) ((n) & 0xffff)
+#define CARD_IDX(n) ((n) >> 16)
+
+static int
+snd_usb_offload_card_route_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct device *sysdev = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_usb_update_offload_route(sysdev,
+ CARD_IDX(kcontrol->private_value),
+ PCM_IDX(kcontrol->private_value),
+ SNDRV_PCM_STREAM_PLAYBACK,
+ SND_SOC_USB_KCTL_CARD_ROUTE,
+ ucontrol->value.integer.value);
+ if (ret < 0) {
+ ucontrol->value.integer.value[0] = -1;
+ ucontrol->value.integer.value[1] = -1;
+ }
+
+ return 0;
+}
+
+static int snd_usb_offload_card_route_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ uinfo->value.integer.max = SNDRV_CARDS;
+
+ return 0;
+}
+
+static struct snd_kcontrol_new snd_usb_offload_mapped_card_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = snd_usb_offload_card_route_info,
+ .get = snd_usb_offload_card_route_get,
+};
+
+static int
+snd_usb_offload_pcm_route_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct device *sysdev = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_usb_update_offload_route(sysdev,
+ CARD_IDX(kcontrol->private_value),
+ PCM_IDX(kcontrol->private_value),
+ SNDRV_PCM_STREAM_PLAYBACK,
+ SND_SOC_USB_KCTL_PCM_ROUTE,
+ ucontrol->value.integer.value);
+ if (ret < 0) {
+ ucontrol->value.integer.value[0] = -1;
+ ucontrol->value.integer.value[1] = -1;
+ }
+
+ return 0;
+}
+
+static int snd_usb_offload_pcm_route_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ /* Arbitrary max value, as there is no 'limit' on number of PCM devices */
+ uinfo->value.integer.max = 0xff;
+
+ return 0;
+}
+
+static struct snd_kcontrol_new snd_usb_offload_mapped_pcm_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = snd_usb_offload_pcm_route_info,
+ .get = snd_usb_offload_pcm_route_get,
+};
+
+/**
+ * snd_usb_offload_create_ctl() - Add USB offload bounded mixer
+ * @chip - USB SND chip device
+ *
+ * Creates a sound control for a USB audio device, so that applications can
+ * query for if there is an available USB audio offload path, and which
+ * card is managing it.
+ */
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ struct usb_device *udev = chip->dev;
+ struct snd_kcontrol_new *chip_kctl;
+ struct snd_usb_substream *subs;
+ struct snd_usb_stream *as;
+ char ctl_name[34];
+ int ret;
+
+ list_for_each_entry(as, &chip->pcm_list, list) {
+ subs = &as->substream[SNDRV_PCM_STREAM_PLAYBACK];
+ if (!subs->ep_num || as->pcm_index > 0xff)
+ continue;
+
+ chip_kctl = &snd_usb_offload_mapped_card_ctl;
+ chip_kctl->count = 1;
+ /*
+ * Store the associated USB SND card number and PCM index for
+ * the kctl.
+ */
+ chip_kctl->private_value = as->pcm_index |
+ chip->card->number << 16;
+ sprintf(ctl_name, "USB Offload Playback Card Route PCM#%d",
+ as->pcm_index);
+ chip_kctl->name = ctl_name;
+ ret = snd_ctl_add(chip->card, snd_ctl_new1(chip_kctl,
+ udev->bus->sysdev));
+ if (ret < 0)
+ break;
+
+ chip_kctl = &snd_usb_offload_mapped_pcm_ctl;
+ chip_kctl->count = 1;
+ /*
+ * Store the associated USB SND card number and PCM index for
+ * the kctl.
+ */
+ chip_kctl->private_value = as->pcm_index |
+ chip->card->number << 16;
+ sprintf(ctl_name, "USB Offload Playback PCM Route PCM#%d",
+ as->pcm_index);
+ chip_kctl->name = ctl_name;
+ ret = snd_ctl_add(chip->card, snd_ctl_new1(chip_kctl,
+ udev->bus->sysdev));
+ if (ret < 0)
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(snd_usb_offload_create_ctl);
diff --git a/sound/usb/qcom/mixer_usb_offload.h b/sound/usb/qcom/mixer_usb_offload.h
new file mode 100644
index 000000000000..d5bed3309173
--- /dev/null
+++ b/sound/usb/qcom/mixer_usb_offload.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __USB_OFFLOAD_MIXER_H
+#define __USB_OFFLOAD_MIXER_H
+
+#if IS_ENABLED(CONFIG_SND_USB_QC_OFFLOAD_MIXER)
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip);
+#else
+static inline int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ return 0;
+}
+#endif
+#endif /* __USB_OFFLOAD_MIXER_H */
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 45c23fee0093..285f05a5e16b 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -37,6 +37,7 @@
#include "../pcm.h"
#include "../power.h"
+#include "mixer_usb_offload.h"
#include "usb_audio_qmi_v01.h"
/* Stream disable request timeout during USB device disconnect */
@@ -1813,6 +1814,7 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
sdev->card_idx = chip->card->number;
sdev->chip_idx = chip->index;
+ snd_usb_offload_create_ctl(chip);
snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
}
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
