Re: [PATCH v3 02/25] clk: versaclock3: Prepare for the addition of 5L35023 device

[Claudiu Beznea <claudiu.beznea@xxxxxxxxx>]

Hi, Geert,

On 09.12.2024 14:16, Geert Uytterhoeven wrote:
> Hi CLaudiu,
> 
> On Mon, Dec 9, 2024 at 12:14 PM Claudiu Beznea <claudiu.beznea@xxxxxxxxx> wrote:
>> On 09.12.2024 12:57, Geert Uytterhoeven wrote:
>>> On Wed, Nov 13, 2024 at 2:35 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>>>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>>>
>>>> The 5P35023 and 5L35035 Versa 3 clock generator variants are different but
>>>> the versaclock3 driver could be used with small adjustments. The features
>>>> that are implemented in driver and differs b/w variants are the PLL2 Fvco
>>>> and clock sel bit for SE2 clock. Adjust the driver to prepare for the
>>>> addition of 5L35023 device.
>>>>
>>>> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>>
>>> Thanks for your patch!
>>>
>>>> --- a/drivers/clk/clk-versaclock3.c
>>>> +++ b/drivers/clk/clk-versaclock3.c
>>>> @@ -166,12 +167,17 @@ struct vc3_div_data {
>>>>  struct vc3_hw_data {
>>>>         struct clk_hw hw;
>>>>         struct regmap *regmap;
>>>> -       const void *data;
>>>> +       void *data;
>>>>
>>>>         u32 div_int;
>>>>         u32 div_frc;
>>>>  };
>>>
>>>> @@ -698,8 +706,6 @@ static struct vc3_hw_data clk_pll[] = {
>>>>                         .num = VC3_PLL2,
>>>>                         .int_div_msb_offs = VC3_PLL2_FB_INT_DIV_MSB,
>>>>                         .int_div_lsb_offs = VC3_PLL2_FB_INT_DIV_LSB,
>>>> -                       .vco_min = VC3_PLL2_VCO_MIN,
>>>> -                       .vco_max = VC3_PLL2_VCO_MAX
>>>>                 },
>>>>                 .hw.init = &(struct clk_init_data) {
>>>>                         .name = "pll2",
>>>
>>>> @@ -1029,9 +1037,16 @@ static int vc3_probe(struct i2c_client *client)
>>>>                                              clk_pfd[i].hw.init->name);
>>>>         }
>>>>
>>>> +       data = i2c_get_match_data(client);
>>>> +
>>>>         /* Register pll's */
>>>>         for (i = 0; i < ARRAY_SIZE(clk_pll); i++) {
>>>>                 clk_pll[i].regmap = regmap;
>>>> +               if (i == VC3_PLL2) {
>>>> +                       struct vc3_pll_data *pll_data = clk_pll[i].data;
>>>> +
>>>> +                       pll_data->vco = data->pll2_vco;
>>>
>>> You cannot modify the global clk_pll[] data, as it is shared when
>>> there are multiple instances.
>>
>> By "multiple instances" do you mean, multiple versa3 devices using this
>> driver? Do you know if we have such a board integrated, ATM?
> 
> Exactly.
> Currently there are no such (upstream) users for 5p35023,
> but e.g. the Beacon RZ/G2M kit has two 5p49v6965 instances.

Are you OK with keeping it as is for the RZ/G3S SSIF support and returning
back later with a solution for the scenario you pointed out? Although, ATM,
I don't have a board to test it.

Thank you,
Claudiu

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>