Convert the text bindings for the Realtek rt5682 and
rt5682i codecs to dt-schema.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
.../devicetree/bindings/sound/realtek,rt5682.yaml | 160 +++++++++++++++++++++
Documentation/devicetree/bindings/sound/rt5682.txt | 98 -------------
2 files changed, 160 insertions(+), 98 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2fd5065551c473dce829155135b4cffb645bbf02
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt5682 and rt5682i codecs
+
+maintainers:
+ - Bard Liao <bardliao@xxxxxxxxxxx>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - realtek,rt5682
+ - realtek,rt5682i
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+ interrupts:
+ maxItems: 1
+ description: The CODEC's interrupt output.
+
+ realtek,dmic1-data-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # dmic1 data is not used
+ - 1 # using GPIO2 pin as dmic1 data pin
+ - 2 # using GPIO5 pin as dmic1 data pin
+ description:
+ Specify which GPIO pin be used as DMIC1 data pin.
+
+ realtek,dmic1-clk-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # using GPIO1 pin as dmic1 clock pin
+ - 1 # using GPIO3 pin as dmic1 clock pin
+ description:
+ Specify which GPIO pin be used as DMIC1 clk pin.
+
+ realtek,jd-src:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # No JD is used
+ - 1 # using JD1 as JD source
+ description:
+ Specify which JD source be used.
+
+ realtek,ldo1-en-gpios:
+ description:
+ The GPIO that controls the CODEC's LDO1_EN pin.
+
+ realtek,btndet-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The debounce delay for push button.
+ The delay time is realtek,btndet-delay value multiple of 8.192 ms.
+ If absent, the default is 16.
+
+ realtek,dmic-clk-rate-hz:
+ description:
+ Set the clock rate (hz) for the requirement of the particular DMIC.
+
+ realtek,dmic-delay-ms:
+ description:
+ Set the delay time (ms) for the requirement of the particular DMIC.
+
+ realtek,amic-delay-ms:
+ description:
+ Set the delay time (ms) for the requirement of the particular platform or AMIC.
+
+ realtek,dmic-clk-driving-high:
+ type: boolean
+ description:
+ Set the high driving of the DMIC clock out.
+
+ clocks:
+ items:
+ - description: phandle and clock specifier for codec MCLK.
+
+ clock-names:
+ items:
+ - const: mclk
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ minItems: 2
+ maxItems: 2
+ description: Name given for DAI word clock and bit clock outputs.
+
+ "#sound-dai-cells":
+ const: 1
+
+ AVDD-supply:
+ description: Regulator supplying analog power through the AVDD pin.
+
+ MICVDD-supply:
+ description: Regulator supplying power for the microphone bias through the
+ MICVDD pin.
+
+ VBAT-supply:
+ description: Regulator supplying battery power through the VBAT pin.
+
+ DBVDD-supply:
+ description: Regulator supplying I/O power through the DBVDD pin.
+
+ LDO1-IN-supply:
+ description: Regulator supplying power to the digital core and charge pump
+ through the LDO1_IN pin.
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - AVDD-supply
+ - VBAT-supply
+ - MICVDD-supply
+ - DBVDD-supply
+ - LDO1-IN-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@1a {
+ compatible = "realtek,rt5682";
+ reg = <0x1a>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio 2 GPIO_ACTIVE_HIGH>;
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <1>;
+ realtek,jd-src = <1>;
+
+ #clock-cells = <1>;
+ clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+ clocks = <&osc>;
+ clock-names = "mclk";
+
+ AVDD-supply = <&avdd_reg>;
+ VBAT-supply = <&vbat_reg>;
+ MICVDD-supply = <&micvdd_reg>;
+ DBVDD-supply = <&dbvdd_reg>;
+ LDO1-IN-supply = <&ldo1_in_reg>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
deleted file mode 100644
index 5e1d08de18a52021619bee9329d1f1cd693ca7cb..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-RT5682 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt5682" or "realtek,rt5682i"
-
-- reg : The I2C address of the device.
-
-- AVDD-supply: phandle to the regulator supplying analog power through the
- AVDD pin
-
-- MICVDD-supply: phandle to the regulator supplying power for the microphone
- bias through the MICVDD pin. Either MICVDD or VBAT should be present.
-
-- VBAT-supply: phandle to the regulator supplying battery power through the
- VBAT pin. Either MICVDD or VBAT should be present.
-
-- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
- pin.
-
-- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
- and charge pump through the LDO1_IN pin.
-
-Optional properties:
-
-- interrupts : The CODEC's interrupt output.
-
-- realtek,dmic1-data-pin
- 0: dmic1 is not used
- 1: using GPIO2 pin as dmic1 data pin
- 2: using GPIO5 pin as dmic1 data pin
-
-- realtek,dmic1-clk-pin
- 0: using GPIO1 pin as dmic1 clock pin
- 1: using GPIO3 pin as dmic1 clock pin
-
-- realtek,jd-src
- 0: No JD is used
- 1: using JD1 as JD source
-
-- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
-
-- realtek,btndet-delay
- The debounce delay for push button.
- The delay time is realtek,btndet-delay value multiple of 8.192 ms.
- If absent, the default is 16.
-
-- #clock-cells : Should be set to '<1>', wclk and bclk sources provided.
-- clock-output-names : Name given for DAI clocks output.
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
- the particular DMIC.
-
-- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
- the particular DMIC.
-
-- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
-
-- #sound-dai-cells: Should be set to '<1>'.
-
-Pins on the device (for linking into audio routes) for RT5682:
-
- * DMIC L1
- * DMIC R1
- * IN1P
- * HPOL
- * HPOR
-
-Example:
-
-rt5682 {
- compatible = "realtek,rt5682i";
- reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
- realtek,ldo1-en-gpios =
- <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
- realtek,dmic1-data-pin = <1>;
- realtek,dmic1-clk-pin = <1>;
- realtek,jd-src = <1>;
- realtek,btndet-delay = <16>;
-
- #clock-cells = <1>;
- clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
-
- clocks = <&osc>;
- clock-names = "mclk";
-
- AVDD-supply = <&avdd_reg>;
- MICVDD-supply = <&micvdd_reg>;
- DBVDD-supply = <&dbvdd_reg>;
- LDO1-IN-supply = <&ldo1_in_reg>;
-};
---
base-commit: 695ead81c12bf5430239b43e9d862d6d790e12ce
change-id: 20241204-topic-misc-rt5682-convert-3b0320e1a700
Best regards,
--
Neil Armstrong <neil.armstrong@xxxxxxxxxx>
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
