From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Add the da7212 audio codec node. Along with it regulators nodes were
reworked to be able to re-use them on da7212.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v2:
- none
.../boot/dts/renesas/rzg3s-smarc-som.dtsi | 17 ++++++++++----
arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 23 +++++++++++++++++++
2 files changed, 35 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 6e58d47d85b0..5ee9dac4aebb 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -63,7 +63,6 @@ vcc_sdhi0: regulator0 {
enable-active-high;
};
-#if SW_CONFIG2 == SW_ON
vccq_sdhi0: regulator1 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -73,8 +72,8 @@ vccq_sdhi0: regulator1 {
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
-#else
- reg_1p8v: regulator1 {
+
+ reg_1p8v: regulator2 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -82,9 +81,17 @@ reg_1p8v: regulator1 {
regulator-boot-on;
regulator-always-on;
};
-#endif
- vcc_sdhi2: regulator2 {
+ reg_3p3v: regulator3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi2: regulator4 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index 4509151344c4..4aa99814b808 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -68,6 +68,29 @@ &i2c0 {
status = "okay";
clock-frequency = <1000000>;
+
+ da7212: codec@1a {
+ compatible = "dlg,da7212";
+ reg = <0x1a>;
+
+ #sound-dai-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&versa3 1>;
+ clock-names = "mclk";
+
+ dlg,micbias1-lvl = <2500>;
+ dlg,micbias2-lvl = <2500>;
+ dlg,dmic-data-sel = "lrise_rfall";
+ dlg,dmic-samplephase = "between_clkedge";
+ dlg,dmic-clkrate = <3000000>;
+
+ VDDA-supply = <®_1p8v>;
+ VDDSP-supply = <®_3p3v>;
+ VDDMIC-supply = <®_3p3v>;
+ VDDIO-supply = <®_1p8v>;
+ };
};
&pinctrl {
--
2.39.2
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]