From: Nuno Sa <nuno.sa@xxxxxxxxxx>
Describe the adau1373 Low Power Codec with Speaker and
Headphone Amplifier.
While at it, properly add a MAINTAINERS entry for ADI sound bindings.
Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
---
.../devicetree/bindings/sound/adi,adau1373.yaml | 111 +++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 112 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1373.yaml b/Documentation/devicetree/bindings/sound/adi,adau1373.yaml
new file mode 100644
index 000000000000..97552bf5d951
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1373.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1373.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1373 CODEC
+
+maintainers:
+ - Nuno Sá <nuno.sa@xxxxxxxxxx>
+
+description: |
+ Analog Devices ADAU1373 Low power codec with speaker and headphone amplifiers.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1373.pdf
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,adau1373
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ powerdown-gpios:
+ description: GPIO used for hardware power-down.
+ maxItems: 1
+
+ adi,micbias1-microvolt:
+ description:
+ This property sets the microphone bias voltage for the first microphone.
+ enum: [1800000, 2200000, 2600000, 2900000]
+ default: 2900000
+
+ adi,micbias2-microvolt:
+ description:
+ This property sets the microphone bias voltage for the second microphone.
+ enum: [1800000, 2200000, 2600000, 2900000]
+ default: 2900000
+
+ adi,input1-differential:
+ description: This property sets the first analog input as differential.
+ type: boolean
+
+ adi,input2-differential:
+ description: This property sets the second analog input as differential.
+ type: boolean
+
+ adi,input3-differential:
+ description: This property sets the third analog input as differential.
+ type: boolean
+
+ adi,input4-differential:
+ description: This property sets the fourth analog input as differential.
+ type: boolean
+
+ adi,lineout-differential:
+ description: This property sets the line output as differential.
+ type: boolean
+
+ adi,lineout-gnd-sense:
+ description: This property enables the line output ground sense control.
+ type: boolean
+
+ adi,drc-settings:
+ description:
+ This setting is used to control the dynamic range of the signal. The
+ device provides a maximum of three full band DRCs with 13 entries each.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ oneOf:
+ - minItems: 13
+ maxItems: 13
+ - minItems: 26
+ maxItems: 26
+ - minItems: 39
+ maxItems: 39
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@1a {
+ compatible = "adi,adau1373";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ powerdown-gpios = <&gpio 100 GPIO_ACTIVE_LOW>;
+ adi,input2-differential;
+ adi,input1-differential;
+ adi,lineout-differential;
+ adi,micbias2-microvolt = <1800000>;
+ adi,drc-settings = /bits/ 8 <
+ 0xff 0xff 0x1 0x2 0xa 0xa 0xd 0x1 0xff 0xff 0x5 0xd 0xff
+ >;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d6272c00fbd..24bc5fcac74a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1521,6 +1521,7 @@ L: linux-sound@xxxxxxxxxxxxxxx
S: Supported
W: http://wiki.analog.com/
W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/sound/adi,*
F: sound/soc/codecs/ad1*
F: sound/soc/codecs/ad7*
F: sound/soc/codecs/adau*
--
2.47.0
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]