From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
When a PCM is restarted after a snd_pcm_drain/snd_pcm_drop(), the prepare
callback will be invoked and the hw_params will be set again. For the
HDA DAI's, the hw_params function handles this case already but not for
the non-HDA DAI's. So, add the check for link_prepared to verify if the
hw_params should be done again or not. Additionally, for SDW DAI's reset
the PCMSyCM registers as would be done in the case of a start after a
hw_free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx>
Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
Signed-off-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
---
sound/soc/sof/intel/hda-dai.c | 36 +++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index 1c823f9eea57..8cccf38967e7 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -370,6 +370,13 @@ static int non_hda_dai_hw_params_data(struct snd_pcm_substream *substream,
return -EINVAL;
}
+ sdev = widget_to_sdev(w);
+ hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
+
+ /* nothing more to do if the link is already prepared */
+ if (hext_stream && hext_stream->link_prepared)
+ return 0;
+
/* use HDaudio stream handling */
ret = hda_dai_hw_params_data(substream, params, cpu_dai, data, flags);
if (ret < 0) {
@@ -377,7 +384,6 @@ static int non_hda_dai_hw_params_data(struct snd_pcm_substream *substream,
return ret;
}
- sdev = widget_to_sdev(w);
if (sdev->dspless_mode_selected)
return 0;
@@ -482,6 +488,31 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream,
int ret;
int i;
+ ops = hda_dai_get_ops(substream, cpu_dai);
+ if (!ops) {
+ dev_err(cpu_dai->dev, "DAI widget ops not set\n");
+ return -EINVAL;
+ }
+
+ sdev = widget_to_sdev(w);
+ hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
+
+ /* nothing more to do if the link is already prepared */
+ if (hext_stream && hext_stream->link_prepared)
+ return 0;
+
+ /*
+ * reset the PCMSyCM registers to handle a prepare callback when the PCM is restarted
+ * due to xruns or after a call to snd_pcm_drain/drop()
+ */
+ ret = hdac_bus_eml_sdw_map_stream_ch(sof_to_bus(sdev), link_id, cpu_dai->id,
+ 0, 0, substream->stream);
+ if (ret < 0) {
+ dev_err(cpu_dai->dev, "%s: hdac_bus_eml_sdw_map_stream_ch failed %d\n",
+ __func__, ret);
+ return ret;
+ }
+
data.dai_index = (link_id << 8) | cpu_dai->id;
data.dai_node_id = intel_alh_id;
ret = non_hda_dai_hw_params_data(substream, params, cpu_dai, &data, flags);
@@ -490,10 +521,7 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream,
return ret;
}
- ops = hda_dai_get_ops(substream, cpu_dai);
- sdev = widget_to_sdev(w);
hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
-
if (!hext_stream)
return -ENODEV;
--
2.43.0
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]