[PATCH 1/3] ASoC: dt-bindings: mt6359: Update generic node name and dmic-mode

[Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>]

Some fix and updates in the following items:
1. examples:
   Update generic node name to 'audio-codec' to comply with the
   coming change in 'mt6359.dtsi'. This change is necessary to fix the
   dtbs_check error:
   pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'

2. mediatek,dmic-mode:
   After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
   discovered that the definitions of 'two wires' and 'one wire' are
   inverted compared to the DT schema.
   For example, the following boards using MT6359 PMIC:
    - mt8192-asurada.dtsi
    - mt8195-cherry.dtsi
   These boards use the same definitions of 'dmic-mode' as other boards
   using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
   in the device trees.

   Upon examining the code in [1] and [2], it was confirmed that the
   definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
   "MT6358 PMIC". Therefore, the DT Schema should be correct as is.

References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515

Fixes: 539237d1c609 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/sound/mt6359.yaml | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml
index 23d411fc4200..128698630c86 100644
--- a/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
-- 
2.45.2