Hi Morimoto-san,
(CC'ing Sakari)
Thank you for the patch.
On Fri, Aug 09, 2024 at 04:22:22AM +0000, Kuninori Morimoto wrote:
> We have endpoint base functions
> - of_graph_get_next_device_endpoint()
> - of_graph_get_device_endpoint_count()
> - for_each_of_graph_device_endpoint()
>
> Here, for_each_of_graph_device_endpoint() loop finds each endpoints
>
> ports {
> port@0 {
> (1) endpoint {...};
> };
> port@1 {
> (2) endpoint {...};
> };
> ...
> };
>
> In above case, it finds endpoint as (1) -> (2) -> ...
>
> Basically, user/driver knows which port is used for what, but not in
> all cases. For example on flexible/generic driver case, how many ports
> are used is not fixed.
>
> For example Sound Generic Card driver which is used from many venders
> can't know how many ports are used. Because the driver is very
> flexible/generic, it is impossible to know how many ports are used,
> it depends on each vender SoC and/or its used board.
>
> And more, the port can have multi endpoints. For example Generic Sound
> Card case, it supports many type of connection between CPU / Codec, and
> some of them uses multi endpoint in one port.
> Then, Generic Sound Card want to handle each connection via "port"
> instead of "endpoint".
> But, it is very difficult to handle each "port" via
> for_each_of_graph_device_endpoint(). Getting "port" by using
> of_get_parent() from "endpoint" doesn't work. see below.
>
> ports {
> port@0 {
> (1) endpoint@0 {...};
> (2) endpoint@1 {...};
> };
> port@1 {
> (3) endpoint {...};
> };
> ...
> };
>
> In the same time, same reason, we want to handle "ports" same as "port".
>
> node {
> => ports@0 {
> port@0 {
> endpoint@0 {...};
> endpoint@1 {...};
> ...
> };
> port@1 {
> endpoint@0 {...};
> endpoint@1 {...};
> ...
> };
> ...
> };
> => ports@1 {
> ...
> };
> };
>
> Add "ports" / "port" base functions.
> For above case, we can use
>
> for_each_of_graph_ports(node, ports) {
> for_each_of_graph_port(ports, port) {
> ...
> }
> }
>
> This loop works in case of "node" doesn't have "ports" also.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> ---
> drivers/of/property.c | 88 ++++++++++++++++++++++++++++++++++++++++
> include/linux/of_graph.h | 46 +++++++++++++++++++++
> 2 files changed, 134 insertions(+)
>
> diff --git a/drivers/of/property.c b/drivers/of/property.c
> index 164d77cb9445..e4d5dfe70104 100644
> --- a/drivers/of/property.c
> +++ b/drivers/of/property.c
> @@ -625,6 +625,76 @@ struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
> }
> EXPORT_SYMBOL(of_graph_get_port_by_id);
>
> +/**
> + * of_graph_get_next_ports() - get next ports node.
> + * @parent: pointer to the parent device node
> + * @prev: previous ports node, or NULL to get first
> + *
> + * If "parent" node doesn't have "ports" node, it returns "parent" node itself as "ports" node.
> + *
> + * Return: A 'ports' node pointer with refcount incremented. Refcount
> + * of the passed @prev node is decremented.
> + */
> +struct device_node *of_graph_get_next_ports(struct device_node *parent,
> + struct device_node *prev)
> +{
> + if (!parent)
> + return NULL;
> +
> + if (!prev) {
> + prev = of_get_child_by_name(parent, "ports");
> +
> + /* use parent as its ports of this device if it not exist */
> + if (!prev)
> + prev = of_node_get(parent);
> +
> + return prev;
> + }
> +
> + do {
> + prev = of_get_next_child(parent, prev);
> + if (!prev)
> + break;
> + } while (!of_node_name_eq(prev, "ports"));
> +
> + return prev;
> +}
> +EXPORT_SYMBOL(of_graph_get_next_ports);
Having multiple "ports" nodes in a device node is not something I've
ever seen before. There may be use cases, but how widespread are they ?
I would prefer handling this in driver code instead of creating a helper
function if the use case is rare.
> +
> +/**
> + * of_graph_get_next_port() - get next port node.
> + * @parent: pointer to the parent device node, or parent ports node
> + * @prev: previous port node, or NULL to get first
> + *
> + * Parent device node can be used as @parent whether device node has ports node or not.
> + * It will work same as ports@0 node.
> + *
> + * Return: A 'port' node pointer with refcount incremented. Refcount
> + * of the passed @prev node is decremented.
> + */
> +struct device_node *of_graph_get_next_port(struct device_node *parent,
> + struct device_node *prev)
> +{
> + if (!parent)
> + return NULL;
> +
> + if (!prev) {
> + struct device_node *ports __free(device_node) =
> + of_graph_get_next_ports(parent, NULL);
This also makes me quite uncomfortable. Iterating over all ports of a
device node that contains multiple "ports" children seems an ill-defined
use case.
> +
> + return of_get_child_by_name(ports, "port");
> + }
> +
> + do {
> + prev = of_get_next_child(parent, prev);
> + if (!prev)
> + break;
> + } while (!of_node_name_eq(prev, "port"));
> +
> + return prev;
> +}
> +EXPORT_SYMBOL(of_graph_get_next_port);
> +
> /**
> * of_graph_get_next_endpoint() - get next endpoint node
> * @parent: pointer to the parent device node
> @@ -823,6 +893,24 @@ unsigned int of_graph_get_endpoint_count(const struct device_node *np)
> }
> EXPORT_SYMBOL(of_graph_get_endpoint_count);
>
> +/**
> + * of_graph_get_port_count() - get the number of port in a device node
> + * @np: pointer to the parent device node
> + *
> + * Return: count of port of this device node
> + */
> +unsigned int of_graph_get_port_count(struct device_node *np)
> +{
> + struct device_node *port = NULL;
> + int num = 0;
As the counter can never be negative, you can make this an unsigned int.
> +
> + for_each_of_graph_port(np, port)
> + num++;
> +
> + return num;
> +}
> +EXPORT_SYMBOL(of_graph_get_port_count);
> +
> /**
> * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
> * @node: pointer to parent device_node containing graph port/endpoint
> diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
> index a4bea62bfa29..a6b91577700a 100644
> --- a/include/linux/of_graph.h
> +++ b/include/linux/of_graph.h
> @@ -37,14 +37,41 @@ struct of_endpoint {
> for (child = of_graph_get_next_endpoint(parent, NULL); child != NULL; \
> child = of_graph_get_next_endpoint(parent, child))
>
> +/**
> + * for_each_of_graph_ports - iterate over every ports in a device node
> + * @parent: parent device node containing ports
> + * @child: loop variable pointing to the current ports node
> + *
> + * When breaking out of the loop, of_node_put(child) has to be called manually.
> + */
> +#define for_each_of_graph_ports(parent, child) \
> + for (child = of_graph_get_next_ports(parent, NULL); child != NULL; \
> + child = of_graph_get_next_ports(parent, child))
> +
> +/**
> + * for_each_of_graph_port - iterate over every port in a device or ports node
> + * @parent: parent device or ports node containing port
> + * @child: loop variable pointing to the current port node
> + *
> + * When breaking out of the loop, of_node_put(child) has to be called manually.
> + */
> +#define for_each_of_graph_port(parent, child) \
> + for (child = of_graph_get_next_port(parent, NULL); child != NULL; \
> + child = of_graph_get_next_port(parent, child))
I think I've proposed something similar a looooong time ago, and was
told that iterating over ports is not something that drivers should do.
The situation may have changed since though.
Sakari, any opinion on this ?
> +
> #ifdef CONFIG_OF
> bool of_graph_is_present(const struct device_node *node);
> int of_graph_parse_endpoint(const struct device_node *node,
> struct of_endpoint *endpoint);
> unsigned int of_graph_get_endpoint_count(const struct device_node *np);
> +unsigned int of_graph_get_port_count(struct device_node *np);
> struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
> struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
> struct device_node *previous);
> +struct device_node *of_graph_get_next_ports(struct device_node *parent,
> + struct device_node *ports);
> +struct device_node *of_graph_get_next_port(struct device_node *parent,
> + struct device_node *port);
> struct device_node *of_graph_get_endpoint_by_regs(
> const struct device_node *parent, int port_reg, int reg);
> struct device_node *of_graph_get_remote_endpoint(
> @@ -73,6 +100,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node
> return 0;
> }
>
> +static inline unsigned int of_graph_get_port_count(struct device_node *np)
> +{
> + return 0;
> +}
> +
> static inline struct device_node *of_graph_get_port_by_id(
> struct device_node *node, u32 id)
> {
> @@ -86,6 +118,20 @@ static inline struct device_node *of_graph_get_next_endpoint(
> return NULL;
> }
>
> +static inline struct device_node *of_graph_get_next_ports(
> + struct device_node *parent,
> + struct device_node *previous)
> +{
> + return NULL;
> +}
> +
> +static inline struct device_node *of_graph_get_next_port(
> + struct device_node *parent,
> + struct device_node *previous)
> +{
> + return NULL;
> +}
> +
> static inline struct device_node *of_graph_get_endpoint_by_regs(
> const struct device_node *parent, int port_reg, int reg)
> {
--
Regards,
Laurent Pinchart
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
