Hi Amaduesz,
On 6/19/2024 12:52 AM, Amadeusz Sławiński wrote:
On 6/18/2024 10:52 PM, Wesley Cheng wrote:
Hi Amadeusz,
On 6/18/2024 4:42 AM, Amadeusz Sławiński wrote:
On 6/17/2024 7:02 PM, Wesley Cheng wrote:
Hi Amadeusz,
On 6/13/2024 12:46 AM, Amadeusz Sławiński wrote:
On 6/12/2024 9:28 PM, Wesley Cheng wrote:
Hi Amadeusz,
On 6/12/2024 7:47 AM, Amadeusz Sławiński wrote:
On 6/11/2024 1:58 AM, Wesley Cheng wrote:
(...)
+In the case where the USB offload driver is unbounded, while
USB SND is
unbounded -> unbound
(...)
+SOC USB and USB Sound Kcontrols
+===============================
+Details
+-------
+SOC USB and USB sound expose a set of SND kcontrols for
applications to select
+and fetch the current offloading status for the ASoC platform
sound card. Kcontrols
+are split between two layers:
+
+ - USB sound - Notifies the sound card number for the ASoC
platform sound
+ card that it is registered to for supporting audio offload.
+
+ - SOC USB - Maintains the current status of the offload
path, and device
+ (USB sound card and PCM device) information. This would
be the main
+ card that applications can read to determine offloading
capabilities.
+
+Implementation
+--------------
+
+**Example:**
+
+ **Sound Cards**:
+
+ ::
+
+ 0 [SM8250MTPWCD938]: sm8250 -
SM8250-MTP-WCD9380-WSA8810-VA-D
+ SM8250-MTP-WCD9380-WSA8810-VA-DMIC
+ 1 [C320M ]: USB-Audio - Plantronics C320-M
+ Plantronics Plantronics C320-M at
usb-xhci-hcd.1.auto-1, full speed
+
+
+ **Platform Sound Card** - card#0:
+
+ ::
+
+ USB Offload Playback Route Card Select 1 (range -1->32)
+ USB Offload Playback Route PCM Select 0 (range -1->255)
+ USB Offload Playback Route Card Status -1 (range -1->32)
+ USB Offload Playback Route PCM Status -1 (range -1->255)
+
+
+ **USB Sound Card** - card#1:
+
+ ::
+
+ USB Offload Playback Capable Card 0 (range -1->32)
+
+
+The platform sound card(card#0) kcontrols are created as part
of adding the SOC
+USB device using **snd_soc_usb_add_port()**. The following
kcontrols are defined
+as:
+
+ - ``USB Offload Playback Route Card Status`` **(R)**: USB
sound card device index
+ that defines which USB SND resources are currently
offloaded. If -1 is seen, it
+ signifies that offload is not active.
+ - ``USB Offload Playback Route PCM Status`` **(R)**: USB PCM
device index
+ that defines which USB SND resources are currently
offloaded. If -1 is seen, it
+ signifies that offload is not active.
+ - ``USB Offload Playback Route Card Select`` **(R/W)**: USB
sound card index which
+ selects the USB device to initiate offloading on. If no
value is written to the
+ kcontrol, then the last USB device discovered card index
will be chosen.
I see only one kcontrol, what if hardware is capable of
offloading on more cards, is it possible to do offloading on more
than one device?
+ - ``USB Offload Playback Route PCM Select`` **(R/W)**: USB
PCM index which selects
+ the USB device to initiate offloading on. If no value is
written to the
+ kcontrol, then the last USB device discovered PCM zero
index will be chosen.
+
+The USB sound card(card#1) kcontrols are created as USB audio
devices are plugged
+into the physical USB port and enumerated. The kcontrols are
defined as:
+
+ - ``USB Offload Playback Capable Card`` **(R)**: Provides the
sound card
+ number/index that supports USB offloading. Further/follow
up queries about
+ the current offload state can be handled by reading the
offload status
+ kcontrol exposed by the platform card.
+
Why do we need to some magic between cards? I feel like whole
kcontrol thing is overengineered a bit - I'm not sure I
understand the need to do linking between cards. It would feel a
lot simpler if USB card exposed one "USB Offload" kcontrol on USB
card if USB controller supports offloading and allowed to set it
to true/false to allow user to choose if they want to do
offloading on device.
(...)
Based on feedback from Pierre, what I understood is that for some
applications, there won't be an order on which sound card is
queried/opened first.
Yes if you have multiple cards, they are probed in random order.
So the end use case example given was if an application opened the
USB sound card first, it can see if there is an offload path
available. If there is then it can enable the offload path on the
corresponding card if desired.
This still doesn't explain why you need to link cards using
controls. What would not work with simple "Enable Offload" with
true/false values on USB card that works while you do have above
routing controls?
Sorry for the late response.
I think either way, even with the "Enable Offload" kcontrol in USB
SND, we'd need a way to link these cards, because if you have
multiple USB audio devices connected, and say... your offload
mechanism only supports one stream. Then I assume we'd still need
to way to determine if that stream can be enabled for that USB SND
device or not.
Since the USB SND isn't really the entity maintaining the offload
path, I went with the decision to add that route selection to the
ASoC platform card. It would have access to all the parameters
supported by the audio DSP.
Problem with card selection is that it will most likely work in
pretty random way during reboots and similar scenarios.
Taking from your example:
USB Offload Playback Route Card Select 1 (range -1->32)
USB Offload Playback Route PCM Select 0 (range -1->255)
USB Offload Playback Route Card Status -1 (range -1->32)
USB Offload Playback Route PCM Status -1 (range -1->255)
This tells that hw:1,0 will be offloaded USB card. What happens if
after reboot the USB card and offload card change places, the control
will be pointing at its owner... Another scenario to consider is that
user attaches two USB cards and only first one does offload. Now what
happens when they enumerate in different order after reboot (swapping
places)? Taking into the account that most systems restore previous
values of controls in some way - this will point at wrong card.
That sounds like a problem that would exist with current USB SND
implementation too? Removing the offloading perspective, how does the
system ensure that the previous setting stays persistent? For
example, as you mentioned, depending on which USB device enumerates
first, the sound card may be different so cards will be switched.
It works because there is no control pointing at other card. My main
problem is with controls which have card and pcm id of other card in it.
I think I mentioned this previously in another discussion, but I think
the idea was that with the
USB Offload Playback Capable Card
kcontrol, would allow the system to at least know there is an offload
capable path pointing to the ASoC platform card, and fetch more
detailed information about which device is selected for offloading,
etc...
This works only in your design, where USB Offload is backed by card,
what happens if it is backed by something else?
In my opinion Offload capability should be the capability of the
endpoint - in this case USB card (even if in the background it needs
to talk to some other device) and it should be exposed as such.
Currently you are mixing capabilities of your audio card with
capabilities of USB card.
And adding more controls will not make it easy to use from end user
perspective. Most users will most likely want for the devices to
perform offload automatically if possible to save power and just have
control to disable it in case they want to test if it works better
without it in case of some problems.
I agree with you that we need to keep the controls at a minimum, but I
think what I have in place is fairly reasonable. If we switch to
having the USB SND controlling things, we'd save maybe one control? I
think keeping the offload status controls are still fairly valuable in
both scenarios, as userspace may need to verify which USB SND card is
being offloaded.
It should be able to tell which one is being offloaded by examining
which USB card has Offload control set to true.
I would assume that USB cards that cannot perform Offload have no
control at all, as it is unneeded. And ones that can do, have Offload
control. And ones actively being Offloaded have it set to true,
otherwise to false.
End user has no need to know where it is offloaded. I'm not HW person,
but I would assume that it is even unlikely that someone will design HW,
where it is possible to Offload one endpoint to two different places, as
this complicates things a lot, but if it were possible, from design
perspective it would make a lot more sense to set it in Offloaded USB
card settings, instead of some seemingly unrelated controller card
device. And that is assuming that all solutions use some other card
device to perform Offload.
Additional question what happens if you want to offload two usb
cards, currently the above set of controls allows you to only point
at one card, will you be adding additional set of above controls
dynamically for each USB card attached?
It would depend on the number of offload streams that folks may be
supporting on their platform. In our case we only have one available
stream, so applications would need to switch between the two devices
using the card/pcm selector.
In this case, there will be only one set of controls to select the
card/pcm device. As of now (I think I'll change to to add another
separate set of controls per stream) if you did support multiple
streams, then the current card/PCM device selector would take in
multiple arugments. (ie for two streams the kcontrol can take in two
values)
Then it is implementation detail of your device, and it should be
implemented as controls in your device instead of as part of generic API.
I initially had it as part of the device specific files, but I did get
some feedback on [1], it might be better to have generic control names,
hence the reason for moving into soc-usb.
I'll spend some time to evaluate your suggestion about moving the logic
to control the offloading from USB SND versus ASoC, since there are
valid points. However, before I do that, I just want to make sure folks
are also inline with that thinking. I've had to put a lot of effort
moving things around such as the previous example, and now you've
suggested to move it back to the vendor specific drivers.
@Pierre, since you've helped with providing a lot of valuable input in
the previous revisions on the kcontrol uses, what do you think about the
proposal from Amadeusz? Basically shifting the offload device selection
into USB SND from the ASoC USB BE driver, and having this per USB SND
device.
[1]
https://lore.kernel.org/linux-usb/20231017200109.11407-30-quic_wcheng@xxxxxxxxxxx/
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
