Re: [PATCH 08/13] clk: add AD24xx clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Quoting Alvin Šipraga (2024-05-17 06:02:15)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 3e9099504fad..a3d54b077e68 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -257,6 +257,13 @@ config COMMON_CLK_LAN966X
>           LAN966X SoC. GCK generates and supplies clock to various peripherals
>           within the SoC.
>  
> +config COMMON_CLK_AD24XX
> +       bool "Clock driver for Analog Devices Inc. AD24xx"

tristate

> +       depends on A2B_AD24XX_NODE

Please make it be COMPILE_TESTed as well?

> +       help
> +         This driver supports the clock output functionality of AD24xx series
> +         A2B transceiver chips.
> +
>  config COMMON_CLK_ASPEED
>         bool "Clock driver for Aspeed BMC SoCs"
>         depends on ARCH_ASPEED || COMPILE_TEST
> diff --git a/drivers/clk/clk-ad24xx.c b/drivers/clk/clk-ad24xx.c
> new file mode 100644
> index 000000000000..ed227c317faa
> --- /dev/null
> +++ b/drivers/clk/clk-ad24xx.c
> @@ -0,0 +1,341 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * AD24xx clock driver
> + *
> + * Copyright (c) 2023 Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/a2b/a2b.h>
> +#include <linux/a2b/ad24xx.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>

Include header for static_assert() at least. There's probably more that
are needed, please check.

> +
> +#define AD24XX_NUM_CLKS 2
> +
> +/* Define some safe macros to make the code more readable */
> +#define A2B_CLKCFG(_idx)        (!(_idx) ? A2B_CLK1CFG : A2B_CLK2CFG)
> +
> +#define A2B_CLKCFG_DIV_SHIFT    A2B_CLK1CFG_CLK1DIV_SHIFT
> +#define A2B_CLKCFG_PDIV_SHIFT   A2B_CLK1CFG_CLK1PDIV_SHIFT
> +
> +#define A2B_CLKCFG_DIV_MASK     A2B_CLK1CFG_CLK1DIV_MASK
> +#define A2B_CLKCFG_PDIV_MASK    A2B_CLK1CFG_CLK1PDIV_MASK
> +#define A2B_CLKCFG_INV_MASK     A2B_CLK1CFG_CLK1INV_MASK
> +#define A2B_CLKCFG_EN_MASK      A2B_CLK1CFG_CLK1EN_MASK
> +
> +static_assert(A2B_CLK1CFG_CLK1DIV_MASK  == A2B_CLK2CFG_CLK2DIV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1PDIV_MASK == A2B_CLK2CFG_CLK2PDIV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1INV_MASK  == A2B_CLK2CFG_CLK2INV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1EN_MASK   == A2B_CLK2CFG_CLK2EN_MASK);
> +
> +struct ad24xx_clkout {
> +       struct clk_hw hw;
> +       unsigned int idx;
> +       bool registered;
> +};
> +
> +struct ad24xx_clk {
> +       struct device *dev;

Is this used?

> +       struct a2b_func *func;

Is this used?

> +       struct a2b_node *node;

Is this used?

> +       struct regmap *regmap;
> +       struct clk_hw *pll_hw;

Is this used outside of probe?

> +       struct ad24xx_clkout clkouts[AD24XX_NUM_CLKS];
> +};
> +
[..]
> +
> +static const struct regmap_config ad24xx_clk_regmap_config = {
> +       .reg_bits = 8,
> +       .val_bits = 8,
> +       .cache_type = REGCACHE_RBTREE,

No max_register?

> +};
> +
> +static struct clk_hw *ad24xx_clk_of_get(struct of_phandle_args *clkspec, void *data)
> +{
> +       struct ad24xx_clk *adclk = data;
> +       unsigned int idx = clkspec->args[0];
> +
> +       if (idx >= AD24XX_NUM_CLKS)
> +               return ERR_PTR(-EINVAL);
> +
> +       if (!adclk->clkouts[idx].registered)
> +               return ERR_PTR(-ENOENT);
> +
> +       return &adclk->clkouts[idx].hw;
> +}
> +
> +static int ad24xx_clk_probe(struct device *dev)
> +{
> +       struct a2b_func *func = to_a2b_func(dev);
> +       struct a2b_node *node = func->node;
> +       struct device_node *np = dev->of_node;
> +       char *pll_name;
> +       const char *sync_clk_name;
> +       struct ad24xx_clk *adclk;
> +       int num_clks;
> +       int ret;
> +       int i;
> +
> +       /*
> +        * Older series AD240x and AD241x chips have a single discrete
> +        * A2B_CLKCFG register that behaves differently to the A2B_CLKnCFG
> +        * registers of the later AD242x series. This driver only supports the
> +        * latter right now.
> +        */
> +       if (!(node->chip_info->caps & A2B_CHIP_CAP_CLKOUT))
> +               return -ENODEV;

Maybe print a warning message to make it more obvious.

> +
> +       adclk = devm_kzalloc(dev, sizeof(*adclk), GFP_KERNEL);
> +       if (!adclk)
> +               return -ENOMEM;
> +
> +       adclk->regmap =
> +               devm_regmap_init_a2b_func(func, &ad24xx_clk_regmap_config);

Put it on one line please .

> +       if (IS_ERR(adclk->regmap))
> +               return PTR_ERR(adclk->regmap);
> +
> +       adclk->dev = dev;
> +       adclk->func = func;
> +       adclk->node = node;
> +       dev_set_drvdata(dev, adclk);
> +
> +       num_clks = of_property_count_strings(np, "clock-output-names");
> +       if (num_clks < 0 || num_clks > AD24XX_NUM_CLKS)
> +               return -EINVAL;

Please register all the clks provided by this chip.

> +
> +       /*
> +        * Register the PLL internally to use it as the parent of the CLKOUTs.
> +        * The PLL runs at 2048 times the SYNC clock rate.
> +        */
> +       pll_name =
> +               devm_kasprintf(dev, GFP_KERNEL, "%s_pll", dev_name(&node->dev));
> +       if (!pll_name)
> +               return -ENOMEM;
> +       sync_clk_name = __clk_get_name(a2b_node_get_sync_clk(func->node));
> +       adclk->pll_hw = devm_clk_hw_register_fixed_factor(
> +               dev, pll_name, sync_clk_name, 0, 2048, 1);

I think this should be devm_clk_hw_register_fixed_factor_fwname().

> +       if (IS_ERR(adclk->pll_hw))
> +               return PTR_ERR(adclk->pll_hw);
> +
> +       for (i = 0; i < num_clks; i++) {
> +               struct clk_init_data init = { };
> +               const char *parent_names = clk_hw_get_name(adclk->pll_hw);

Please use struct clk_parent_data instead of strings to describe
topology.

> +               unsigned int idx = i;
> +
> +               /* Clock outputs can be skipped with the clock-indices property */
> +               of_property_read_u32_index(np, "clock-indices", i, &idx);
> +               if (idx > AD24XX_NUM_CLKS)
> +                       return -EINVAL;
> +
> +               ret = of_property_read_string_index(np, "clock-output-names", i,
> +                                                   &init.name);

The name should only be for debug purposes. Please don't use
clock-output-names DT property. If you need to make it unique perhaps
you can add in the device name or something like that?

> +               if (ret)
> +                       return ret;
> +
> +               init.ops = &ad24xx_clk_ops;
> +               init.parent_names = &parent_names;
> +               init.num_parents = 1;
> +
> +               adclk->clkouts[idx].hw.init = &init;
> +               adclk->clkouts[idx].idx = idx;
> +               adclk->clkouts[idx].registered = true;
> +
> +               ret = devm_clk_hw_register(dev, &adclk->clkouts[idx].hw);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       ret = devm_of_clk_add_hw_provider(dev, ad24xx_clk_of_get, adclk);
> +       if (ret)
> +               return ret;
> +
> +       return 0;

Please just return devm_of_clk_add_hw_provider(...) to prevent the
cleanup crews from sending a followup patch.

> +}
> +
> +static const struct of_device_id ad24xx_clk_of_match_table[] = {
> +       { .compatible = "adi,ad2420-clk" },
> +       { .compatible = "adi,ad2421-clk" },
> +       { .compatible = "adi,ad2422-clk" },
> +       { .compatible = "adi,ad2425-clk" },
> +       { .compatible = "adi,ad2426-clk" },
> +       { .compatible = "adi,ad2427-clk" },
> +       { .compatible = "adi,ad2428-clk" },
> +       { .compatible = "adi,ad2429-clk" },
> +       { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ad24xx_clk_of_match_table);
> +
> +static struct a2b_driver ad24xx_clk_driver = {

I guess because this isn't a platform driver I can't merge this through
the clk tree? Is there any difference from the platform bus?

> +       .driver = {
> +               .name = "ad24xx-clk",
> +               .of_match_table = ad24xx_clk_of_match_table,
> +               .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +       },
> +       .probe = ad24xx_clk_probe,
> +};
> +module_a2b_driver(ad24xx_clk_driver);





[Index of Archives]     [Pulseaudio]     [Linux Audio Users]     [ALSA Devel]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]

  Powered by Linux