RE: [PATCH v2 1/2] ASoC: dt-bindings: Add PDM controller for the StarFive JH8100 SoC

[Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>]

> 
> On 23/04/2024 10:34, Krzysztof Kozlowski wrote:
> >
> > On 23/04/2024 10:34, Xingyu Wu wrote:
> > > Add bindings about the PDM controller for the StarFive JH8100 SoC.
> > >
> > > Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> >
> > If there is going to be resend/new version, three nits. Anyway:
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> >
> 
> I will fix it in next version. Thanks.
> 
> > ...
> >
> > > +
> > > +title: StarFive JH8100 PDM controller
> > > +
> > > +description: |
> >
> > Do not need '|' unless you need to preserve formatting.
> 
> Will drop.
> 
> >
> > > +  The Pulse Density Modulation (PDM) controller is a digital PDM
> > > + out microphone interface controller and decoder that supports both
> > > + up to
> > > + 4  channels, and an Inter-IC Sound (I2S) transmitter that outputs
> > > + standard  stereo audio data to another device. The I2S transmitter
> > > + can be  configured to operate either a master or a slave (default
> > > + mode). The PDM  controller includes two PDM blocks, each PDM block
> > > + can drive one  bitstream sampling clock and two bitstream coming
> > > + data (mono/stereo)  with sampling clock rising and falling edge.
> > > +
> > > +maintainers:
> > > +  - Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> > > +  - Walker Chen <walker.chen@xxxxxxxxxxxxxxxx>
> > > +
> > > +allOf:
> > > +  - $ref: dai-common.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: starfive,jh8100-pdm
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: DMIC output clock
> > > +      - description: Main ICG clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: dmic
> > > +      - const: icg
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +  "#sound-dai-cells":
> > > +    const: 0
> > > +
> > > +  starfive,syscon:
> > > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > > +    items:
> > > +      - items:
> > > +          - description: phandle to System Register Controller sys_syscon_ne
> node.
> > > +          - description: PDM source enabled control offset of
> > > + SYS_SYSCON_NE
> > register.
> > > +          - description: PDM source enabled control mask
> > > +    description:
> > > +      The phandle to System Register Controller syscon node and the
> > > + PDM
> > source
> > > +      from I2S enabled control offset and mask of SYS_SYSCON_NE register.
> >
> > This description duplicates items. Drop redundant parts (there is
> > really never a need to say phandle is a phandle because it cannot be
> > anything else). Instead say what is it used for.
> 
> Will fix.
> 
> >
> >
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - resets
> > > +  - '#sound-dai-cells'
> >
> > Use consistent quotes, either ' or "
> >
> 
> Will fix.
> 
> Best regards,
> Xingyu Wu

Sorry, it was resent. Forget that.

Thanks,
Xingyu Wu