Re: [PATCH v4 1/7] ASoC: dt-bindings: document wcd937x Audio Codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 16/05/2024 06:47, Mohammad Rafi Shaik wrote:
> From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
> 
> Document the Qualcomm WCD9370/WCD9375 Audio Codec and the
> Soundwire devices than can be found on Qualcomm QCM6490 based platforms.
> 
> The Qualcomm WCD9370/WCD9375 Audio Codec communicates

Thank you for your patch. There is something to discuss/improve.

> +
> +  qcom,tx-port-mapping:
> +    description: |
> +      Specifies static port mapping between device and host tx ports.
> +      In the order of the device port index which are adc1_port, adc23_port,
> +      dmic03_mbhc_port, dmic46_port.
> +      Supports maximum 4 tx soundwire ports.
> +
> +      WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
> +      WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
> +      WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
> +      WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
> +
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 4
> +    maxItems: 4
> +    items:
> +      oneOf:

oneOf here is not needed. Previously used enum should be fine.


> +        - minimum: 1
> +          maximum: 4
> +
> +  qcom,rx-port-mapping:
> +    description: |
> +      Specifies static port mapping between device and host rx ports.
> +      In the order of device port index which are hph_port, clsh_port,
> +      comp_port, lo_port, dsd port.
> +      Supports maximum 5 rx soundwire ports.
> +
> +      WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
> +      WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
> +      WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
> +      WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
> +      WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
> +
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 5
> +    maxItems: 5
> +    items:
> +      oneOf:

Again, no need for oneof.

> +        - minimum: 1
> +          maximum: 5
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soundwire@3210000 {
> +        reg = <0x03210000 0x2000>;
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        wcd937x_rx: codec@0,4 {
> +            compatible = "sdw20217010a00";
> +            reg  = <0 4>;
> +            qcom,rx-port-mapping = <1 2 3 4 5>;
> +        };
> +    };
> +
> +    soundwire@3230000 {
> +        reg = <0x03230000 0x2000>;
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        wcd937x_tx: codec@0,3 {
> +            compatible = "sdw20217010a00";
> +            reg  = <0 3>;
> +            qcom,tx-port-mapping = <2 2 3 4>;
> +        };
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
> new file mode 100644
> index 000000000000..5c76083691ea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm WCD9370/WCD9375 Audio Codec
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> +
> +description:
> +  Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC.
> +  It has RX and TX Soundwire slave devices.
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +  - $ref: qcom,wcd93xx-common.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: qcom,wcd9370-codec
> +      - items:
> +          - const: qcom,wcd9375-codec
> +          - const: qcom,wcd9370-codec
> +
> +  vdd-px-supply:
> +    description: A reference to the 1.8V I/O supply
> +
> +required:
> +  - compatible

I guess VDDPX is not really optional in the hardware is it?

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    codec {
> +        compatible = "qcom,wcd9370-codec";
> +        pinctrl-names = "default", "sleep";
> +        pinctrl-0 = <&wcd_reset_n>;
> +        pinctrl-1 = <&wcd_reset_n_sleep>;
> +        reset-gpios = <&tlmm 83 0>;

Use defines for common/known flags, like GPIO flags.

> +        vdd-buck-supply = <&vreg_l17b_1p8>;
> +        vdd-rxtx-supply = <&vreg_l18b_1p8>;
> +        vdd-px-supply = <&vreg_l18b_1p8>;
> +        vdd-mic-bias-supply = <&vreg_bob>;
> +        qcom,micbias1-microvolt = <1800000>;
> +        qcom,micbias2-microvolt = <1800000>;
> +        qcom,micbias3-microvolt = <1800000>;
> +        qcom,micbias4-microvolt = <1800000>;
> +        qcom,rx-device = <&wcd937x_rx>;
> +        qcom,tx-device = <&wcd937x_tx>;
> +        #sound-dai-cells = <1>;
> +    };
> +
> +    /* ... */
> +
> +    soundwire@3210000 {
> +        reg = <0x03210000 0x2000>;
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        wcd937x_rx: codec@0,4 {
> +            compatible = "sdw20217010a00";
> +            reg  = <0 4>;

Just one space goes before =
This applies to all places.

> +            qcom,rx-port-mapping = <1 2 3 4 5>;
> +        };
> +    };
> +
> +    soundwire@3230000 {
> +        reg = <0x03230000 0x2000>;
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        wcd937x_tx: codec@0,3 {
> +            compatible = "sdw20217010a00";
> +            reg  = <0 3>;

Best regards,
Krzysztof





[Index of Archives]     [Pulseaudio]     [Linux Audio Users]     [ALSA Devel]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]

  Powered by Linux