From: Brent Lu <brent.lu@xxxxxxxxx>
The original code for rt1015p could support 1 or 2 rt1015p device
instances in ACPI. However, all designs implement only 1 instance in
ACPI table so we remove the code segment which is for 2 instances.
Reviewed-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
Signed-off-by: Brent Lu <brent.lu@xxxxxxxxx>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
sound/soc/intel/boards/sof_realtek_common.c | 57 ++-------------------
sound/soc/intel/boards/sof_realtek_common.h | 1 -
2 files changed, 5 insertions(+), 53 deletions(-)
diff --git a/sound/soc/intel/boards/sof_realtek_common.c b/sound/soc/intel/boards/sof_realtek_common.c
index 6915ff8b8716..dda346e0f737 100644
--- a/sound/soc/intel/boards/sof_realtek_common.c
+++ b/sound/soc/intel/boards/sof_realtek_common.c
@@ -314,59 +314,21 @@ EXPORT_SYMBOL_NS(sof_rt1011_codec_conf, SND_SOC_INTEL_SOF_REALTEK_COMMON);
*
* For stereo output, there are always two amplifiers on the board.
* However, the ACPI implements only one device instance (UID=0) if they
- * are sharing the same enable pin. The code will detect the number of
- * device instance and use corresponding DAPM structures for
- * initialization.
+ * are sharing the same enable pin. This is the case of rt1015p.
*/
-static const struct snd_soc_dapm_route rt1015p_1dev_dapm_routes[] = {
+static const struct snd_soc_dapm_route rt1015p_dapm_routes[] = {
/* speaker */
{ "Left Spk", NULL, "Speaker" },
{ "Right Spk", NULL, "Speaker" },
};
-static const struct snd_soc_dapm_route rt1015p_2dev_dapm_routes[] = {
- /* speaker */
- { "Left Spk", NULL, "Left Speaker" },
- { "Right Spk", NULL, "Right Speaker" },
-};
-
-static struct snd_soc_codec_conf rt1015p_codec_confs[] = {
- {
- .dlc = COMP_CODEC_CONF(RT1015P_DEV0_NAME),
- .name_prefix = "Left",
- },
- {
- .dlc = COMP_CODEC_CONF(RT1015P_DEV1_NAME),
- .name_prefix = "Right",
- },
-};
-
static struct snd_soc_dai_link_component rt1015p_dai_link_components[] = {
{
.name = RT1015P_DEV0_NAME,
.dai_name = RT1015P_CODEC_DAI,
},
- {
- .name = RT1015P_DEV1_NAME,
- .dai_name = RT1015P_CODEC_DAI,
- },
};
-static int rt1015p_get_num_codecs(void)
-{
- static int dev_num;
-
- if (dev_num)
- return dev_num;
-
- if (!acpi_dev_present("RTL1015", "1", -1))
- dev_num = 1;
- else
- dev_num = 2;
-
- return dev_num;
-}
-
static int rt1015p_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -398,12 +360,8 @@ static int rt1015p_init(struct snd_soc_pcm_runtime *rtd)
return ret;
}
- if (rt1015p_get_num_codecs() == 1)
- ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_1dev_dapm_routes,
- ARRAY_SIZE(rt1015p_1dev_dapm_routes));
- else
- ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_2dev_dapm_routes,
- ARRAY_SIZE(rt1015p_2dev_dapm_routes));
+ ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_dapm_routes,
+ ARRAY_SIZE(rt1015p_dapm_routes));
if (ret)
dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
return ret;
@@ -412,7 +370,7 @@ static int rt1015p_init(struct snd_soc_pcm_runtime *rtd)
void sof_rt1015p_dai_link(struct snd_soc_dai_link *link)
{
link->codecs = rt1015p_dai_link_components;
- link->num_codecs = rt1015p_get_num_codecs();
+ link->num_codecs = ARRAY_SIZE(rt1015p_dai_link_components);
link->init = rt1015p_init;
link->ops = &rt1015p_ops;
}
@@ -420,11 +378,6 @@ EXPORT_SYMBOL_NS(sof_rt1015p_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
void sof_rt1015p_codec_conf(struct snd_soc_card *card)
{
- if (rt1015p_get_num_codecs() == 1)
- return;
-
- card->codec_conf = rt1015p_codec_confs;
- card->num_configs = ARRAY_SIZE(rt1015p_codec_confs);
}
EXPORT_SYMBOL_NS(sof_rt1015p_codec_conf, SND_SOC_INTEL_SOF_REALTEK_COMMON);
diff --git a/sound/soc/intel/boards/sof_realtek_common.h b/sound/soc/intel/boards/sof_realtek_common.h
index d0e331530b39..876290555c22 100644
--- a/sound/soc/intel/boards/sof_realtek_common.h
+++ b/sound/soc/intel/boards/sof_realtek_common.h
@@ -31,7 +31,6 @@ void sof_rt1011_codec_conf(struct device *dev, struct snd_soc_card *card);
*/
#define RT1015P_CODEC_DAI "HiFi"
#define RT1015P_DEV0_NAME RT1015P_ACPI_HID ":00"
-#define RT1015P_DEV1_NAME RT1015P_ACPI_HID ":01"
void sof_rt1015p_dai_link(struct snd_soc_dai_link *link);
void sof_rt1015p_codec_conf(struct snd_soc_card *card);
--
2.40.1
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]