From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.
Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: Rander Wang <rander.wang@xxxxxxxxx>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
sound/soc/sof/intel/hda.c | 1 +
sound/soc/sof/ipc4-topology.c | 12 ++++++++++--
sound/soc/sof/ipc4-topology.h | 1 +
3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 2c64c25d6f3b..d38dc43c2f1c 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -164,6 +164,7 @@ static int sdw_params_free(struct device *dev, struct sdw_intel_stream_free_data
struct sof_ipc4_copier *ipc4_copier;
ipc4_copier = dai->private;
+ ipc4_copier->dai_index = 0;
copier_data = &ipc4_copier->data;
/* clear the node ID */
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index e0e4f356275f..c29c1de4e925 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -1732,6 +1732,8 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
*/
i = 0;
list_for_each_entry(w, &sdev->widget_list, list) {
+ u32 node_type;
+
if (w->widget->sname &&
strcmp(w->widget->sname, swidget->widget->sname))
continue;
@@ -1739,7 +1741,10 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
dai = w->private;
alh_copier = (struct sof_ipc4_copier *)dai->private;
alh_data = &alh_copier->data;
- blob->alh_cfg.mapping[i].device = alh_data->gtw_cfg.node_id;
+ node_type = SOF_IPC4_GET_NODE_TYPE(alh_data->gtw_cfg.node_id);
+ blob->alh_cfg.mapping[i].device = SOF_IPC4_NODE_TYPE(node_type);
+ blob->alh_cfg.mapping[i].device |=
+ SOF_IPC4_NODE_INDEX(alh_copier->dai_index);
/*
* The mapping[i] device in ALH blob should be the same as the
@@ -2862,12 +2867,15 @@ static int sof_ipc4_dai_config(struct snd_sof_dev *sdev, struct snd_sof_widget *
/*
* Do not clear the node ID when this op is invoked with
* SOF_DAI_CONFIG_FLAGS_HW_FREE. It is needed to free the group_ida during
- * unprepare.
+ * unprepare. The node_id for multi-gateway DAI's will be overwritten with the
+ * group_id during copier's ipc_prepare op.
*/
if (flags & SOF_DAI_CONFIG_FLAGS_HW_PARAMS) {
+ ipc4_copier->dai_index = data->dai_node_id;
copier_data->gtw_cfg.node_id &= ~SOF_IPC4_NODE_INDEX_MASK;
copier_data->gtw_cfg.node_id |= SOF_IPC4_NODE_INDEX(data->dai_node_id);
}
+
break;
case SOF_DAI_INTEL_DMIC:
case SOF_DAI_INTEL_SSP:
diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h
index aa5122c3721d..6e33208a357f 100644
--- a/sound/soc/sof/ipc4-topology.h
+++ b/sound/soc/sof/ipc4-topology.h
@@ -45,6 +45,7 @@
#define SOF_IPC4_NODE_INDEX_MASK 0xFF
#define SOF_IPC4_NODE_INDEX(x) ((x) & SOF_IPC4_NODE_INDEX_MASK)
#define SOF_IPC4_NODE_TYPE(x) ((x) << 8)
+#define SOF_IPC4_GET_NODE_TYPE(node_id) ((node_id) >> 8)
/* Node ID for SSP type DAI copiers */
#define SOF_IPC4_NODE_INDEX_INTEL_SSP(x) (((x) & 0xf) << 4)
--
2.40.1
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]