Hello Neil,
On Fri, Mar 15, 2024 at 05:53:05PM +0100, Neil Armstrong wrote:
> Hi Jan!
>
> On 15/03/2024 00:21, Jan Dakinevich wrote:
> > This series includes the following:
> >
> > - new audio clock and reset controller data and adaptation for it of existing
> > code (patches 0001..0004);
> >
> > - adaptation of existing audio components for A1 Soc (patches 0005..0021);
> >
> > - handy cosmetics for dai-link naming (patches 0022..0023);
> >
> > - integration of audio devices into common trees (patch 0024);
> >
> > - audio support bring up on Amlogic ad402 reference board (patch 0025). This
> > patch is not actually checked on real hardware (because all ad402 that we had
> > were burned out). This patch is based on ad402's schematics and on experience
> > with our own hardware (which is very close to reference board);
>
> Thanks for your serie, it's nice you're working on upstreaming this feature.
>
> In my opinion it's fine to have a "big" initial serie if you're not sure
> if your changes are ok, but next time add the RFC tag so we know it's not
> a final changeset and you seek advices.
>
> Overall the code is clean and your patch order makes sense if they were meant
> to be applied by a single maintainer, but in this case it will be split
> into multiple subsystems so it's better to split them as Jerome explained
> to ease review and the maintainers process.
>
> Don't hesitate discussing with us in the #linux-amlogic IRC channel
> on Libera.Chat, the goal is to reduce the number of patch version and
> ease the review and maintainance process.
>
> Concerning the link-name property, I think it should be done afterwards
> since it's not necessary to support audio on A1, and I think it could
> be extended to other SoC boards (which would be a great feature).
If you don't mind, I will send this change in a separate patch series.
Although I don't have support for all boards in the linux-amlogic, I can
test it on some Khadas and Odroid boards on my side. I will prepare link
names for them.
> >
> > Dmitry Rokosov (2):
> > ASoC: dt-bindings: meson: introduce link-name optional property
> > ASoC: meson: implement link-name optional property in meson card utils
> >
> > Jan Dakinevich (23):
> > clk: meson: a1: restrict an amount of 'hifi_pll' params
> > clk: meson: axg: move reset controller's code to separate module
> > dt-bindings: clock: meson: add A1 audio clock and reset controller
> > bindings
> > clk: meson: a1: add the audio clock controller driver
> > ASoC: meson: codec-glue: add support for capture stream
> > ASoC: meson: g12a-toacodec: fix "Lane Select" width
> > ASoC: meson: g12a-toacodec: rework the definition of bits
> > ASoC: dt-bindings: meson: g12a-toacodec: add support for A1 SoC family
> > ASoC: meson: g12a-toacodec: add support for A1 SoC family
> > ASoC: meson: t9015: prepare to adding new platforms
> > ASoC: dt-bindings: meson: t9015: add support for A1 SoC family
> > ASoC: meson: t9015: add support for A1 SoC family
> > ASoC: dt-bindings: meson: axg-pdm: document 'sysrate' property
> > ASoC: meson: axg-pdm: introduce 'sysrate' property
> > pinctrl/meson: fix typo in PDM's pin name
> > ASoC: dt-bindings: meson: meson-axg-audio-arb: claim support of A1 SoC
> > family
> > ASoC: dt-bindings: meson: axg-fifo: claim support of A1 SoC family
> > ASoC: dt-bindings: meson: axg-pdm: claim support of A1 SoC family
> > ASoC: dt-bindings: meson: axg-sound-card: claim support of A1 SoC
> > family
> > ASoC: dt-bindings: meson: axg-tdm-formatters: claim support of A1 SoC
> > family
> > ASoC: dt-bindings: meson: axg-tdm-iface: claim support of A1 SoC
> > family
> > arm64: dts: meson: a1: add audio devices
> > arm64: dts: ad402: enable audio
> >
> > .../bindings/clock/amlogic,a1-audio-clkc.yaml | 83 +++
> > .../reset/amlogic,meson-axg-audio-arb.yaml | 10 +-
> > .../bindings/sound/amlogic,axg-fifo.yaml | 8 +
> > .../bindings/sound/amlogic,axg-pdm.yaml | 5 +
> > .../sound/amlogic,axg-sound-card.yaml | 12 +-
> > .../sound/amlogic,axg-tdm-formatters.yaml | 22 +-
> > .../bindings/sound/amlogic,axg-tdm-iface.yaml | 6 +-
> > .../bindings/sound/amlogic,g12a-toacodec.yaml | 1 +
> > .../bindings/sound/amlogic,gx-sound-card.yaml | 6 +
> > .../bindings/sound/amlogic,t9015.yaml | 4 +-
> > .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 126 ++++
> > arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 471 +++++++++++++++
> > drivers/clk/meson/Kconfig | 18 +
> > drivers/clk/meson/Makefile | 2 +
> > drivers/clk/meson/a1-audio.c | 556 ++++++++++++++++++
> > drivers/clk/meson/a1-audio.h | 58 ++
> > drivers/clk/meson/a1-pll.c | 8 +-
> > drivers/clk/meson/axg-audio.c | 95 +--
> > drivers/clk/meson/meson-audio-rstc.c | 109 ++++
> > drivers/clk/meson/meson-audio-rstc.h | 12 +
> > drivers/pinctrl/meson/pinctrl-meson-a1.c | 6 +-
> > .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 ++++
> > .../reset/amlogic,meson-a1-audio-reset.h | 29 +
> > .../dt-bindings/sound/meson-g12a-toacodec.h | 5 +
> > sound/soc/meson/axg-pdm.c | 10 +-
> > sound/soc/meson/g12a-toacodec.c | 298 ++++++++--
> > sound/soc/meson/meson-card-utils.c | 12 +-
> > sound/soc/meson/meson-codec-glue.c | 174 ++++--
> > sound/soc/meson/meson-codec-glue.h | 23 +
> > sound/soc/meson/t9015.c | 326 +++++++++-
> > 30 files changed, 2394 insertions(+), 223 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
> > create mode 100644 drivers/clk/meson/a1-audio.c
> > create mode 100644 drivers/clk/meson/a1-audio.h
> > create mode 100644 drivers/clk/meson/meson-audio-rstc.c
> > create mode 100644 drivers/clk/meson/meson-audio-rstc.h
> > create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
> > create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
> >
>
--
Thank you,
Dmitry
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
