On 23/01/2024 12:14, Shenghao Ding wrote:
> PCM6240 driver implements a flexible and configurable setting for register
> and filter coefficients, to one, two or even multiple PCM6240 Family Audio
> chips.
>
> Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx>
Subject: ASoC
Subject: rewrite to match something similar to other commits.
>
> ---
> Change in v1:
> - Create yaml file for pcm6240 codec driver
I don't understand. v1 is the first version. Against what is this change?
> ---
> .../devicetree/bindings/sound/ti,pcm6240.yaml | 303 ++++++++++++++++++
> 1 file changed, 303 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
> new file mode 100644
> index 000000000000..59fd48aa4445
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
> @@ -0,0 +1,303 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 - 2024 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ti,pcm6240.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments PCM6240 Family Audio ADC/DAC/Router
> +
> +maintainers:
> + - Shenghao Ding <shenghao-ding@xxxxxx>
> +
> +description: |
> + The PCM6240 Family driver offer a flexible architecture to set the device
Describe hardware, not Linux driver.
> + number, registers and params for different filters in a bin file.
I don't understand entire sentence in context of hardware.
> +
> + Specifications about the audio chip can be found at:
> + https://www.ti.com/lit/gpn/tlv320adc3120
> + https://www.ti.com/lit/gpn/tlv320adc5120
> + https://www.ti.com/lit/gpn/tlv320adc6120
> + https://www.ti.com/lit/gpn/dix4192
> + https://www.ti.com/lit/gpn/pcm1690
> + https://www.ti.com/lit/gpn/pcm3120-q1
> + https://www.ti.com/lit/gpn/pcm3140-q1
> + https://www.ti.com/lit/gpn/pcm5120-q1
> + https://www.ti.com/lit/gpn/pcm6120-q1
> + https://www.ti.com/lit/gpn/pcm6260-q1
> + https://www.ti.com/lit/gpn/pcm9211
> + https://www.ti.com/lit/gpn/pcmd3140
> + https://www.ti.com/lit/gpn/pcmd3180
> + https://www.ti.com/lit/gpn/taa5212
> + https://www.ti.com/lit/gpn/tad5212
> +
> +properties:
> + compatible:
> + description: |
> + ti,adc3120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
> + digital converter (ADC) with 106-dB SNR.
> +
> + ti,adc5120: 2-Channel, 768-kHz, Burr-BrownTM Audio ADC with 120-dB SNR.
> +
> + ti,adc6120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
> + digital converter (ADC) with 123-dB SNR.
> +
> + ti,pcm1690: 113dB SNR, 24-Bit, 192-kHz Sampling, Enhanced Multi-Level
> + ?S, Eight-Channel Audio Digital-to-Analog Converter with Differential
> + Outputs.
> +
> + ti,pcm3120: Automotive, stereo, 106-dB SNR, 768-kHz, low-power
> + software-controlled audio ADC.
> +
> + ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
> + with 106-dB SNR.
> +
> + ti,pcm5120: Automotive, stereo, 120-dB SNR, 768-kHz, low-power
> + software-controlled audio ADC.
> +
> + ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
> + with 120-dB SNR.
> +
> + ti,pcm6120: Automotive, stereo, 123-dB SNR, 768-kHz, low-power
> + software-controlled audio ADC.
> +
> + ti,pcm6140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
> + with 123-dB SNR.
> +
> + ti,pcm6240: Automotive 4-ch audio ADC with integrated programmable mic
> + bias, boost and input diagnostics.
> +
> + ti,pcm6260: Automotive 6-ch audio ADC with integrated programmable mic
> + bias, boost and input diagnostics.
> +
> + ti,pcm9211: 216-kHz Digital Audio Interface Transceiver (DIX)
> + With Stereo ADC and Routing.
> +
> + ti,pcmd3140: Four-channel PDM-input to TDM or I�S output converter.
> +
> + ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or
> + I�S output converter.
> +
> + ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB
> + dynamic range.
> +
> + ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range.
> + enum:
> + - ti,adc3120
> + - ti,adc5120
> + - ti,adc6120
> + - ti,dix4192
> + - ti,pcm1690
> + - ti,pcm3120
> + - ti,pcm3140
> + - ti,pcm5120
> + - ti,pcm5140
> + - ti,pcm6120
> + - ti,pcm6140
> + - ti,pcm6240
> + - ti,pcm6260
> + - ti,pcm9211
> + - ti,pcmd3140
> + - ti,pcmd3180
> + - ti,pcmd512x
> + - ti,taa5212
> + - ti,taa5412
> + - ti,tad5212
> + - ti,tad5412
And none of them are compatible with something?
> +
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
minItems, then maxItems.
Please open existing bindings and look how it is done there.
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + A GPIO line handling reset of the chip. As the line is active high,
> + it should be marked GPIO_ACTIVE_HIGH.
Drop description, it's obvious. Or write something useful.
> +
> + interrupts:
> + maxItems: 1
> + description:
> + Invalid only for ti,pcm1690 because of no INT pin.
> +
> + '#sound-dai-cells':
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - $ref: dai-common.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm1690
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
> + items:
> + minimum: 0x4c
> + maximum: 0x4f
Why do you repeat the reg constraints? This does not seem needed.
> + interrupts: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm3140
> + - ti,pcm5140
> + - ti,pcm6140
> + - ti,pcmd3180
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
Drop entire if
> + items:
> + minimum: 0x4c
> + maximum: 0x4f
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,adc3120
> + - ti,adc5120
> + - ti,adc6120
> + - ti,pcm3120
> + - ti,pcm5120
> + - ti,pcm6120
> + - ti,pcmd3140
> + then:
> + properties:
> + reg:
> + description:
> + I2C address.
Just drop description, it is obvious.
> + maxItems: 1
> + items:
> + maximum: 0x4e
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,dix4192
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
> + items:
> + minimum: 0x70
> + maximum: 0x73
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm6240
> + - ti,pcm6260
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
> + items:
> + minimum: 0x48
> + maximum: 0x4b
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,pcm9211
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
> + items:
> + minimum: 0x40
> + maximum: 0x43
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ti,taa5212
> + - ti,taa5412
> + - ti,tad5212
> + - ti,tad5412
> + then:
> + properties:
> + reg:
> + description:
> + I2C address, in multiple pcmdevices case, all the i2c address
> + aggregate as one Audio Device to support multiple audio slots.
> + maxItems: 4
> + minItems: 1
> + items:
> + minimum: 0x50
> + maximum: 0x53
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + i2c {
> + /* example for two devices with interrupt support */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + two: pcmdevice@48 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "ti,pcm6240";
> + reg = <0x48>, /* primary-device */
> + <0x4b>; /* secondary-device */
> + #sound-dai-cells = <0>;
> + reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >;
Drop redundant spaces.
Best regards,
Krzysztof
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
