Re: [PATCH v2 2/4] reset: Instantiate reset GPIO controller for shared reset-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fr, 2024-01-05 at 16:59 +0100, Krzysztof Kozlowski wrote:
> Devices sharing a reset GPIO could use the reset framework for
> coordinated handling of that shared GPIO line.  We have several cases of
> such needs, at least for Devicetree-based platforms.
> 
> If Devicetree-based device requests a reset line, which is missing but
                                                    ^^^^^^^^^^^^^^^^
Nitpick: the "resets" property is missing, not the reset line.

"If Devicetree-based device requests a reset line, but there only is a
 reset-gpios property instead of a "resets" property, ..." maybe?

> there is a reset-gpios property, instantiate a new "reset-gpio" platform
> device which will handle such reset line.  This allows seamless handling
> of such shared reset-gpios without need of changing Devicetree binding [1].
> 
> All newly registered "reset-gpio" platform devices will be stored on
> their own list to avoid any duplicated devices.

That's not strictly true. The reset_gpio_device_list only contains the
of_phandle_args for lookup.

> The key to find each of
> such platform device is the entire Devicetree GPIO specifier: phandle to
> GPIO controller, GPIO number and GPIO flags.  If two devices have
> conflicting "reset-gpios" property, e.g. with different ACTIVE_xxx
> flags, this would spawn two separate "reset-gpio" devices, where the
> second would fail probing on busy GPIO reques

request.

Is that true? The code below looks like overwrites of_phandle_args so
that only one reset-gpio device is spawned for each gpio node.

> Link: https://lore.kernel.org/all/YXi5CUCEi7YmNxXM@xxxxxxxxxxxxxxxxxx/ [1]
> Cc: Bartosz Golaszewski <brgl@xxxxxxxx>
> Cc: Sean Anderson <sean.anderson@xxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  drivers/reset/core.c             | 176 ++++++++++++++++++++++++++++---
>  include/linux/reset-controller.h |   4 +
>  2 files changed, 167 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/reset/core.c b/drivers/reset/core.c
> index 4d5a78d3c085..ec9b3ff419cf 100644
> --- a/drivers/reset/core.c
> +++ b/drivers/reset/core.c
> @@ -13,6 +13,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/acpi.h>
> +#include <linux/platform_device.h>
>  #include <linux/reset.h>
>  #include <linux/reset-controller.h>
>  #include <linux/slab.h>
> @@ -23,6 +24,10 @@ static LIST_HEAD(reset_controller_list);
>  static DEFINE_MUTEX(reset_lookup_mutex);
>  static LIST_HEAD(reset_lookup_list);
>  
> +/* Protects reset_gpio_device_list */
> +static DEFINE_MUTEX(reset_gpio_device_mutex);
> +static LIST_HEAD(reset_gpio_device_list);

I would call this reset_gpio_lookup_list or
reset_gpio_phandle_args_list.

> +
>  /**
>   * struct reset_control - a reset control
>   * @rcdev: a pointer to the reset controller device
> @@ -63,6 +68,16 @@ struct reset_control_array {
>  	struct reset_control *rstc[] __counted_by(num_rstcs);
>  };
>  
> +/**
> + * struct reset_gpio_device - ad-hoc created reset-gpio device
> + * @of_args: phandle to the reset controller with all the args like GPIO number
> + * @list: list entry for the reset_lookup_list
> + */
> +struct reset_gpio_device {

Similarly, I would call this reset_gpio_lookup or
reset_gpio_phandle_args.

> +	struct of_phandle_args of_args;
> +	struct list_head list;
> +};
> +
>  static const char *rcdev_name(struct reset_controller_dev *rcdev)
>  {
>  	if (rcdev->dev)
> @@ -813,13 +828,119 @@ static void __reset_control_put_internal(struct reset_control *rstc)
>  	kref_put(&rstc->refcnt, __reset_control_release);
>  }
>  
> +static bool __reset_gpios_args_match(const struct of_phandle_args *a1,
> +				     const struct of_phandle_args *a2)
> +{
> +	unsigned int i;
> +
> +	if (!a2)
> +		return false;
> +
> +	if (a1->args_count != a2->args_count)
> +		return false;
> +
> +	for (i = 0; i < a1->args_count; i++)
> +		if (a1->args[i] != a2->args[i])
> +			break;

Just return false in the loop and simplify the following to return
true.

> +
> +	/* All args matched? */
> +	if (i == a1->args_count)
> +		return true;
> +
> +	return false;
> +}
> +
> +/*
> + * @node:	node of the device requesting reset
> + * @reset_args:	phandle to the reset controller with all the args like GPIO number
> + */
> +static int __reset_add_reset_gpio_device(struct device_node *node,
> +					 struct of_phandle_args *args)
> +{
> +	struct reset_gpio_device *rgpio_dev;
> +	struct platform_device *pdev;
> +	int ret;
> +
> +	lockdep_assert_not_held(&reset_list_mutex);
> +
> +	mutex_lock(&reset_gpio_device_mutex);
> +
> +	list_for_each_entry(rgpio_dev, &reset_gpio_device_list, list) {
> +		if (args->np == rgpio_dev->of_args.np) {
> +			if (__reset_gpios_args_match(args,
> +						     &rgpio_dev->of_args)) {
> +				ret = 0;
> +				goto out_unlock;
> +			}
> +		}
> +	}
> +
> +	/* Not freed in normal path, persisent subsyst data */
> +	rgpio_dev = kzalloc(sizeof(*rgpio_dev), GFP_KERNEL);

Since this is persistent, instead of letting the reset-gpio driver call
of_parse_phandle_with_args() again, this could be passed in via
platform data. Is there a reason not to do that instead?

> +	if (!rgpio_dev) {
> +		ret = -ENOMEM;
> +		goto out_unlock;
> +	}
> +
> +	rgpio_dev->of_args = *args;
> +	pdev = platform_device_register_data(NULL, "reset-gpio",
> +					     PLATFORM_DEVID_AUTO, &node,
> +					     sizeof(node));
> +	ret = PTR_ERR_OR_ZERO(pdev);
> +	if (!ret)
> +		list_add(&rgpio_dev->list, &reset_gpio_device_list);
> +	else
> +		kfree(rgpio_dev);
> +
> +out_unlock:
> +	mutex_unlock(&reset_gpio_device_mutex);
> +
> +	return ret;
> +}
> +
> +static struct reset_controller_dev *__reset_find_rcdev(struct of_phandle_args *args,
> +						       bool gpio_fallback,
> +						       const void *cookie)

Unused cookie.

> +{
> +	struct reset_controller_dev *r, *rcdev;
> +
> +	lockdep_assert_held(&reset_list_mutex);
> +
> +	rcdev = NULL;
> +	list_for_each_entry(r, &reset_controller_list, list) {
> +		if (args->np == r->of_node) {
> +			if (gpio_fallback) {
> +				if (__reset_gpios_args_match(args, r->of_args)) {
> +					/*
> +					 * Fake args (take first reset) and
> +					 * args_count (to matcg reset-gpio

match

> +					 * of_reset_n_cells) because reset-gpio
> +					 * has only one reset and does not care
> +					 * about reset of GPIO specifier.
> +					 */
> +					args->args[0] = 0;
> +					args->args_count = 1;

I'd expect args to be an input-only argument, but here its contents are
overwritten after a match. Why?

This has an effect in __of_reset_control_get(), that I find hard to
follow. See below.

> +					rcdev = r;
> +					break;
> +				}
> +			} else {
> +				rcdev = r;
> +				break;
> +			}
> +		}
> +	}
> +
> +	return rcdev;
> +}
> +
>  struct reset_control *
>  __of_reset_control_get(struct device_node *node, const char *id, int index,
>  		       bool shared, bool optional, bool acquired)
>  {
> +	struct of_phandle_args args = {0};
> +	bool gpio_fallback = false;
>  	struct reset_control *rstc;
> -	struct reset_controller_dev *r, *rcdev;
> -	struct of_phandle_args args;
> +	struct reset_controller_dev *rcdev;
>  	int rstc_id;
>  	int ret;
>  
> @@ -839,21 +960,50 @@ __of_reset_control_get(struct device_node *node, const char *id, int index,
>  					 index, &args);
>  	if (ret == -EINVAL)
>  		return ERR_PTR(ret);
> -	if (ret)
> -		return optional ? NULL : ERR_PTR(ret);
> +	if (ret) {
> +		/*
> +		 * There can be only one reset-gpio for regular devices, so
> +		 * don't bother with GPIO index.
> +		 */

I don't understand this comment. The GPIO index should be checked as
part of __reset_gpios_args_match(), or should it not?

> +		ret = of_parse_phandle_with_args(node, "reset-gpios", "#gpio-cells",
> +						 0, &args);
> +		if (ret)
> +			return optional ? NULL : ERR_PTR(ret);
>  
> -	mutex_lock(&reset_list_mutex);
> -	rcdev = NULL;
> -	list_for_each_entry(r, &reset_controller_list, list) {
> -		if (args.np == r->of_node) {
> -			rcdev = r;
> -			break;
> -		}
> +		gpio_fallback = true;

Is there a reason not just call __reset_add_reset_gpio_device() here?
With that, there should be no need to call __reset_find_rcdev() twice.

>  	}
>  
> +	mutex_lock(&reset_list_mutex);
> +	rcdev = __reset_find_rcdev(&args, gpio_fallback, NULL);

This gets called with args as parsed. If there is a match, this will 
overwrite args (in the gpio_fallback case) and return NULL.

> +
>  	if (!rcdev) {
> -		rstc = ERR_PTR(-EPROBE_DEFER);
> -		goto out;
> +		if (gpio_fallback) {
> +			/*
> +			 * Registering reset-gpio device might cause immediate
> +			 * bind, thus taking reset_list_mutex lock via
> +			 * reset_controller_register().
> +			 */
> +			mutex_unlock(&reset_list_mutex);
> +			ret = __reset_add_reset_gpio_device(node, &args);

So this will also be called with args as parsed.

> +			mutex_lock(&reset_list_mutex);
> +			if (ret) {
> +				rstc = ERR_PTR(ret);
> +				goto out;
> +			}
> +			/*
> +			 * Success: reset-gpio could probe immediately, so
> +			 * re-check the lookup.
> +			 */
> +			rcdev = __reset_find_rcdev(&args, gpio_fallback, NULL);

And this will again be called with args as parsed and overwrite args
again.

> +			if (!rcdev) {
> +				rstc = ERR_PTR(-EPROBE_DEFER);
> +				goto out;
> +			}
> +			/* Success, rcdev is valid thus do not bail out */
> +		} else {
> +			rstc = ERR_PTR(-EPROBE_DEFER);
> +			goto out;
> +		}
>  	}

So at this point args is overwritten in the gpio_fallback case. I would
find it much clearer to just overwrite args here and make the first
parameter to __reset_find_rcdev() const.


regards
Philipp





[Index of Archives]     [Pulseaudio]     [Linux Audio Users]     [ALSA Devel]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]

  Powered by Linux