[PATCH AUTOSEL 6.6 15/47] ASoC: fsl_xcvr: refine the requested phy clock frequency

[Sasha Levin <sashal@xxxxxxxxxx>]

From: Shengjiu Wang <shengjiu.wang@xxxxxxx>

[ Upstream commit 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 ]

As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.

The relation of phy clock is:
    sai_pll_ref_sel
       sai_pll
          sai_pll_bypass
             sai_pll_out
                sai_pll_out_div2
                   earc_phy_cg

Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
Reviewed-by: Iuliana Prodan <iuliana.prodan@xxxxxxx>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@xxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 sound/soc/fsl/fsl_xcvr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index 77f8e2394bf93..f0fb33d719c25 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
 	struct device *dev = &xcvr->pdev->dev;
 	int ret;
 
-	freq = xcvr->soc_data->spdif_only ? freq / 10 : freq;
+	freq = xcvr->soc_data->spdif_only ? freq / 5 : freq;
 	clk_disable_unprepare(xcvr->phy_clk);
 	ret = clk_set_rate(xcvr->phy_clk, freq);
 	if (ret < 0) {
@@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	u32 m_ctl = 0, v_ctl = 0;
 	u32 r = substream->runtime->rate, ch = substream->runtime->channels;
-	u32 fout = 32 * r * ch * 10 * 2;
+	u32 fout = 32 * r * ch * 10;
 	int ret = 0;
 
 	switch (xcvr->mode) {
-- 
2.42.0