Hello guys,
I have a problem when using my MSI R9 380 4G graphic card as GPU passthrough with KVM.
At the first linux boot (Fedora 23) I am able to successfully start virtual machine and it works!
However if i will shut down virtual machine and start it again - the screen will stay blank!
However if i will shut down virtual machine and start it again - the screen will stay blank!
So far I have been able to find on the internet that some graphic cards just can not reinitialize itself when there is no power off/on, which could be the case of mine as well.
Also I am very much surprised that this graphic card has no UEFI rom!
Any help would be appreciated
[root@brutus-coreos ~]# virsh start winos1
Domain winos1 started
dmesg output after second boot of the virtual machine winos1
[ 338.346776] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:045E:0800.0007/input/input23
[ 338.397715] hid-generic 0003:045E:0800.0007: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-10/input0
[ 338.402847] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:045E:0800.0008/input/input24
[ 338.403605] hid-generic 0003:045E:0800.0008: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-10/input1
[ 338.419310] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:045E:0800.0009/input/input25
[ 338.470855] hid-generic 0003:045E:0800.0009: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-10/input2
[ 754.055255] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[ 754.087966] xhci_hcd 0000:00:14.0: remove, state 4
[ 754.087982] usb usb2: USB disconnect, device number 1
[ 754.090201] xhci_hcd 0000:00:14.0: USB bus 2 deregistered
[ 754.090399] xhci_hcd 0000:00:14.0: remove, state 1
[ 754.090409] usb usb1: USB disconnect, device number 1
[ 754.090413] usb 1-2: USB disconnect, device number 2
[ 754.090964] usb 1-8: USB disconnect, device number 3
[ 754.091904] usb 1-10: USB disconnect, device number 4
[ 754.222281] xhci_hcd 0000:00:14.0: USB bus 1 deregistered
[ 755.359725] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x270
[ 755.359733] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x1b@0x2d0
[ 755.384598] vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 755.485743] vfio_ecap_init: 0000:03:00.0 hiding ecap 0x1e@0x154
screen is blank - I have to reboot my Linux machine in order to be able to start this virtual machine once again
_______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
