|
On 05/17/2014 11:06 PM, JvR O wrote:
In general adding a route with the "ip" commandline utility will only make that change temporarily. At any rate, it's not the virtualization host that needs a route added (there will already be a direct route for that added when the bridge is created), but *all the other machines on your network* (or at least the default router) that will need a route added. (Or possibly I've misunderstood the mistake you made, and you actually tried to enter the above route on some other machine on the network, not the virtualization host itself. In that case, the reason it didn't work when you first added the route is because you have the wrong destination) For example, if your virtualization host has a physical ethernet adapter at 10.0.0.40, and you've created a libvirt network with forward mode='route' and an ip address of 192.168.20.1, all other hosts on the physical network will need to know how to get to machines on the 192.168.20.1 network; this is done by adding a route equivalent to this on (at least) the default router for the 10.0.0.0 network: destination 192.168.20.0/24 gateway: 10.0.0.40 Likewise, on any other subnet that isn't on the far side of a NAT gateway, you will need to add a route with destination 192.168.20.0/24 with the gateway being the local-subnet IP address of some router that is also connected to the 10.0.0.0 network. Beyond this short explanation, this really is a straight networking question, not virtualization-related, so you could be better serviced by looking up some IP routing FAQs.
Because the machines out on the physical network do not have access to the routing table on your virtualization host, and have no idea where 192.168.1.15 is anyway. The rule for a useful route is that the destination should be some subnet that none of the local machine's interfaces are directly connected to, and the gateway must be an address that *is* on a subnet directly connected to one of the machine's interfaces.
|
_______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
