From: Yanbing Du <ydu@xxxxxxxxxxxxxxxxxxxx>
By default, the bus type is inferred from the style of the device
name('target' in this command), e.g. a device named 'sda' will
typically be exported using a SCSI bus. Actually, not only SCSI bus,
but USB/SATA bus also use this kind of device name. So add '--bus'
option for attach-disk command to allow user specify the target bus.
Signed-off-by: Yanbing Du <ydu@xxxxxxxxxx>
---
tools/virsh-domain.c | 14 ++++++++++++--
tools/virsh.pod | 9 +++++++--
2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index f55dae4..4488250 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -277,6 +277,10 @@ static const vshCmdOptDef opts_attach_disk[] = {
.flags = VSH_OFLAG_REQ,
.help = N_("target of disk device")
},
+ {.name = "bus",
+ .type = VSH_OT_STRING,
+ .help = N_("target bus of disk device")
+ },
{.name = "driver",
.type = VSH_OT_STRING,
.help = N_("driver of disk device")
@@ -502,7 +506,7 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
const char *source = NULL, *target = NULL, *driver = NULL,
*subdriver = NULL, *type = NULL, *mode = NULL,
*cache = NULL, *serial = NULL, *straddr = NULL,
- *wwn = NULL;
+ *wwn = NULL, *targetbus = NULL;
struct DiskAddress diskAddr;
bool isFile = false, functionReturn = false;
int ret;
@@ -536,6 +540,7 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
vshCommandOptStringReq(ctl, cmd, "serial", &serial) < 0 ||
vshCommandOptStringReq(ctl, cmd, "wwn", &wwn) < 0 ||
vshCommandOptStringReq(ctl, cmd, "address", &straddr) < 0 ||
+ vshCommandOptStringReq(ctl, cmd, "bus", &targetbus) < 0 ||
vshCommandOptStringReq(ctl, cmd, "sourcetype", &stype) < 0)
goto cleanup;
@@ -590,7 +595,12 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
if (source)
virBufferAsprintf(&buf, "<source %s='%s'/>\n",
isFile ? "file" : "dev", source);
- virBufferAsprintf(&buf, "<target dev='%s'/>\n", target);
+ virBufferAsprintf(&buf, "<target dev='%s'", target);
+ if (targetbus) {
+ virBufferAsprintf(&buf, " bus='%s'", targetbus);
+ }
+ virBufferAddLit(&buf, "/>\n");
+
if (mode)
virBufferAsprintf(&buf, "<%s/>\n", mode);
diff --git a/tools/virsh.pod b/tools/virsh.pod
index b248c9a..3550825 100644
--- a/tools/virsh.pod
+++ b/tools/virsh.pod
@@ -2091,7 +2091,7 @@ expected.
=item B<attach-disk> I<domain> I<source> I<target>
[[[I<--live>] [I<--config>] | [I<--current>]] | [I<--persistent>]]
-[I<--driver driver>] [I<--subdriver subdriver>] [I<--cache cache>]
+[I<--bus>] [I<--driver driver>] [I<--subdriver subdriver>] [I<--cache cache>]
[I<--type type>] [I<--mode mode>] [I<--sourcetype sourcetype>]
[I<--serial serial>] [I<--wwn wwn>] [I<--rawio>]
[I<--address address>] [I<--multifunction>] [I<--print-xml>]
@@ -2099,7 +2099,12 @@ expected.
Attach a new disk device to the domain.
I<source> is path for the files and devices. I<target> controls the bus or
device under which the disk is exposed to the guest OS. It indicates the
-"logical" device name. I<driver> can be I<file>, I<tap> or I<phy> for the Xen
+"logical" device name; the optional I<bus> attribute specifies the type of
+disk device to emulate; possible values are driver specific, with typical
+values being I<ide>, I<scsi>, I<virtio>, I<xen>, I<usb>, I<sata>, or I<sd>,
+if omitted, the bus type is inferred from the style of the device name (e.g.
+a device named 'sda' will typically be exported using a SCSI bus).
+I<driver> can be I<file>, I<tap> or I<phy> for the Xen
hypervisor depending on the kind of access; or I<qemu> for the QEMU emulator.
Further details to the driver can be passed using I<subdriver>. For Xen
I<subdriver> can be I<aio>, while for QEMU subdriver should match the format
--
1.9.3
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list