[Adding qemu] On 05/22/2014 05:07 AM, Laine Stump wrote: > commit e31b5cf393857 attempted to fix libvirt's > VIR_DOMAIN_EVENT_ID_RTC_CHANGE, which is documentated to always s/documentated/documented/ > provide the new offset of the domain's real time clock from UTC. The > problem was that, in the case that qemu is provided with an "-rtc > base=x" where x is an absolute time (rather than "utc" or > "localtime"), the offset sent by qemu's RTC_CHANGE event is *not* the > new offset from UTC, but rather is the sum of all changes to the > domain's RTC since it was started with base=x. > > So, despite what was said in commit e31b5cf393857, if we assume that > the original value stored in "adjustment" was the offset from UTC at > the time the domain was started, we can always determine the current > offset from UTC by simply adding the most recent (i.e. current) offset > from qemu to that original adjustment. Is this true even if we miss an RTC update event from qemu? I'm worried about the following situation: user prepares to do a libvirtd upgrade, so libvirtd is shut down. Then the guest triggers an RTC update, so qemu sends an event, but the event is lost. Then libvirtd starts again, and doesn't realize the event is lost. Do we need more help from qemu, such as a new field to an existing QMP command (or a new QMP command) that lists the cumulative offset that qemu is using, where we call that query command any time after an RTC update event or after a libvirtd restart? I'm wondering if this is more a bug in qemu for not providing the right information rather than libvirt's responsibility to work around it. If the only way to keep accurate information is to sum the values we get from events, we are at risk of a lost event getting us messed up. > > This patch accomplishes that by storing the initial adjustment in the > domain's status as "adjustment0". Each time a new RTC_CHANGE event is > received from qemu, we simply add adjustment0 to the value sent by > qemu, store that as the new adjustment, and forward that value on to > any event handler. > > This patch (*not* e31b5cf393857, which should be reverted prior to > applying this patch) fixes: > > https://bugzilla.redhat.com/show_bug.cgi?id=964177 > > (for the case where basis='utc'. It does not fix basis='localtime') > --- > > Changes from V1: remove all attempts to fix basis='localtime' in favor > of fixing it in a simpler and better manner in a separate patch. I'd also appreciate it if the qemu developers can chime in on what is supposed to happen for localtime guests. There are at least four combinations: host running on UTC bios time, guest running on UTC time (in my opinion, the only sane setting, but we're talking about reality not sanity) host running on UTC, guest running on localtime (perhaps the guest is windows, and we know that windows prefers to run on localtime) host running on localtime bios (perhaps because it is dual-boot with windows, and windows prefers bios in localtime), guest running on UTC time host running on localtime, guest running on localtime But it gets even more complicated. The host localtime need not be consistent with the guest localtime. That is, I could be a cloud provider with servers on the east coast, and renting out processor time to a client on the west coast that wants their guest tied to west coast localtime. And that's assuming that both host and guest switch in and out of daylight savings at the same time, which falls apart when you cross political boundaries. Then there's the fun of migration (what if my server farm is spread across multiple timezones - does migration take into account the difference in localtime between source and destination servers). I can _totally_ understand the desire to run a GUEST in such a way that the guest thinks it has a bios stored in localtime (and when the guest updates the RTC twice a year to account for daylight savings, it changes what offset we track about the guest). But I think it is INSANITY to ever try and run a host on a localtime system (daylight savings changes in the host are just asking for problems to the guests) - so even if the host is tied to localtime bios, it is still probably wiser for qemu to base its offsets to UTC no matter what. If the commandline allows a specification of a localtime offset, I think it should be used ONLY for a one-time up-front conversion into a corresponding UTC offset, and then execute qemu in relation to utc thereafter (therefore, migration is always done in terms of utc, without regards for whether source and destination have a different localtime). > > src/conf/domain_conf.c | 21 +++++++++++++++++---- > src/conf/domain_conf.h | 7 +++++++ > src/qemu/qemu_command.c | 9 +++++++++ > src/qemu/qemu_process.c | 27 ++++++++++++++++++++++----- > 4 files changed, 55 insertions(+), 9 deletions(-) > > diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c > - if (vm->def->clock.offset == VIR_DOMAIN_CLOCK_OFFSET_VARIABLE) > + if (vm->def->clock.offset == VIR_DOMAIN_CLOCK_OFFSET_VARIABLE) { > + /* when a basedate is manually given on the qemu commandline > + * rather than simply "-rtc base=utc", the offset sent by qemu > + * in this event is *not* the new offset from UTC, but is > + * instead the new offset from the *original basedate* + > + * uptime. For example, if the original offset was 3600 and > + * the guest clock has been advanced by 10 seconds, qemu will > + * send "10" in the event - this means that the new offset > + * from UTC is 3610, *not* 10. If the guest clock is advanced > + * by another 10 seconds, qemu will now send "20" - i.e. each > + * event is the sum of the most recent change and all previous > + * changes since the domain was started. Fortunately, we have > + * saved the initial offset in "adjustment0", so to arrive at > + * the proper new "adjustment", we just add the most recent > + * offset to adjustment0. > + */ > + offset += vm->def->clock.data.variable.adjustment0; > vm->def->clock.data.variable.adjustment = offset; > > - if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) > - VIR_WARN("unable to save domain status with RTC change"); > + if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) > + VIR_WARN("unable to save domain status with RTC change"); > + } > + > + event = virDomainEventRTCChangeNewFromObj(vm, offset); > > virObjectUnlock(vm); > > -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Attachment:
signature.asc
Description: OpenPGP digital signature
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list