Re: [RFC] require for suggestions on support for ivshmem device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for reply

> -----Original Message-----
> From: Martin Kletzander [mailto:mkletzan@xxxxxxxxxx]
> Sent: Tuesday, May 20, 2014 5:18 PM
> To: Wangrui (K)
> Cc: libvir-list@xxxxxxxxxx; Zhangbo (Oscar); Yanqiangjun; Zengjunliang;
> Moyuxiang; jdenemar@xxxxxxxxxx
> Subject: Re:  [RFC] require for suggestions on support for ivshmem
> device
> 
> On Wed, May 14, 2014 at 08:23:21AM +0000, Wangrui (K) wrote:
> >Hi,
> >
> >Libvirt does not support ivshmem(Inter-VM Shared Memory) device
> >recently, thus, I would like to know if there's any plan to support it in the
> future?
> >If not, I would like to contribute a serial of patches to do so.
> >
> >On Jan 28, Wangyufei (James) asked about this question, and Daniel replied
> with 2 suggestions:
> >1. Libvirt should be capable of configuring the guest's xml on ivshmem.
> >2.An ivshmem daemon is needed to run on the host to support it, libvirt is
> recommended to provide such a daemon.
> >Please refer to
> https://www.redhat.com/archives/libvir-list/2014-January/msg01335.html for
> details.
> >
> >What I'll do later is the 1st suggestion, the 2nd one is left to be accomplished
> by someone else.
> >
> >Here is the detailed work I'll do to support configuration of the guest in libvirt:
> >virDomainDefParseXML:                 parse ivshmem device xml when
> defining dom.xml
> >virDomainDeviceInfoIterateInternal:       iterate ivshmem devices
> >qemuAssignDevicePCISlots:              assign ivshmem device pci slots
> >virDomainDefFormatInternal:             format ivshmem device xml (Eg.
> virsh edit dom)
> >virDomainDefFree:                     free ivshmem device def
> >
> >qemuBuildCommandLine:               build ivshmem device command
> line when vm starts
> >qemuAssignDeviceAliases:              assign ivshmem device aliases
> when vm starts
> >
> >virDomainDeviceDefParse:               attach and parse ivshmem
> device xml
> >qemuDomainAttachDeviceConfig:         attach ivshmem device xml
> persistently
> >qemuDomainAttachDeviceLive:           attach ivshmem device online
> >
> >qemuDomainDetachDeviceConfig:         detach ivshmem device xml
> persistently
> >qemuDomainDetachDeviceLive:           detach ivshmem device online
> >
> 
> Don't forget about checking for the qemu capability and error-ing out properly
> in case it's not supported, you probably know you can use
> qemuBuildChrChardevStr() for the '-chardev' part of the commandline, various
> backends are supported and the code is in already.
> 

OK. Thanks for your reminding.

> The idea looks good, it would be nice improvement to have.  About the
> daemon, you mean it would be another daemon we have in the repo like
> virtlockd, I suppose.
> 

Yes, I think the daemon can be libvirtd or others.
The existing ivmshm daemon was just a proof of concept
demo by the original developers (as Dan said). Maybe
libvirt provides the daemon in feature.

> >
> >There are two ways to use ivshmem with qemu (please refer to
> >http://qemu.weilnetz.de/qemu-doc.html#pcsys_005fother_005fdevs ):
> >1.Guests map a POSIX shared memory region into the guest as a PCI
> >device that enables zero-copy communication to the application level of the
> guests, The basic syntax is:
> >
> >  qemu-system-i386-device ivshmem, size = <size in format accepted by
> > -m> [, shm = <shm name>]
> >
> >2.If desired, interrupts can be sent between guest VMs accessing the same
> shared memory region.
> >Interrupt support requires using a shared memory server and using a chardev
> socket to connect to it.
> >An example syntax when using the shared memory server is:
> >
> >  qemu-system-i386-device ivshmem, size = <size in format accepted by -m> [,
> chardev = <id>] [, msi = on]
> >                               [, ioeventfd = on] [, vectors = n] [,
> > role = peer | master]  qemu-system-i386-chardev socket, path = <path>,
> > id = <id>
> >
> >The respective xml configuration for the above 2 qemu command lines are
> shown as below:
> >
> >Example1: automatically attach device with KVM
> >
> >  <devices>
> >    <ivshmem role='master'>
> >      <memory name='dom-ivshmem' size='2'/>
> >    </ivshmem>
> >  </devices>
> >
> >NOTE: "size" means ivshmem size in unit MB, "name" means shm name
> >      "role" is optional, it may be set to "master" or "peer", the default one
> is "master"
> >
> 
> What do these roles mean, I mean what's the difference between master and
> peer and why is it only used with the chardev?  Does it mean master can only
> send interrupts or...?  Just curious.
> 

The role is not always used with chardev (such as Example 1 and 2).  
IIUC, master and peer only act differently in migration. Master will
migrate the shared memory to dest but peer will not.
The function of sending interrupts you mentioned is provided in daemon.

With-role=master, the guest will copy the shared memory on migration to the
destination host. 
With role=peer, the guest will not be able to migrate with the device attached. 
With the-peer-case, the device should be detached and then reattached after
migration using the PCI hotplug support.
(please refer to http://qemu.weilnetz.de/qemu-doc.html#pcsys_005fother_005fdevs).

> >Example2: manually attach device with static PCI slot 4 requested
> >
> >  <devices>
> >    <ivshmem role='master'>
> >      <memory name='dom-ivshmem' size='2'/>
> >      <address type='pci' domain='0x0000' bus='0x00' slot='0x04'
> function='0x0'/>
> >    </ivshmem>
> >  </devices>
> >
> >Example3: automatically attach device with KVM
> >
> >  <devices>
> >    <ivshmem role='master' type='unix'>
> >      <source mode='connect' path='/tmp/ivshmem'/>
> >      <memory name='dom-ivshmem' size='2'/>
> >    </ivshmem>
> >  </devices>
> >
> >NOTE: "path" means shared memory socket path which is set by the daemon.
> >      " source mode " and "type" is similar with vmchannel.
> >
> >
> >I'm looking forward to your suggestions, thank you very much.
> >
> >--
> >libvir-list mailing list
> >libvir-list@xxxxxxxxxx
> >https://www.redhat.com/mailman/listinfo/libvir-list

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]