Re: [PATCH v2] libvirt support to force convergence of live guest migration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 06, 2014 at 15:44:36 -0800, Chegu Vinod wrote:
> Hello,
> 'am sending this updated patch as an attachment (as I was having some 
> issues with my smtp server and git send-email setup).
> Thanks,
> Vinod
> 
> 

> Subject: [PATCH v2] libvirt support to force convergence of live guest migration
> 
> Changes since RFC (i.e. v1) patch :
> - Incorporated feedback from Jiri Denemark
> 
> Busy enterprise workloads hosted on large sized VM's tend to dirty
> memory faster than the transfer rate achieved via live guest migration.
> Despite some good recent improvements (& using dedicated 10Gig NICs
> between hosts) the live migration may NOT converge.
> 
> Recently support was added in qemu (version 1.6) to allow a user to
> choose if they wish to force convergence of their migration via a
> new migration capability : "auto-converge". This feature allows for qemu
> to auto-detect lack of convergence and trigger a throttle-down of the
> VCPUs.
> 
> This patch includes the libvirt support needed to trigger this
> feature. (Testing is in progress)
> 
> Signed-off-by:  Chegu Vinod <chegu_vinod@xxxxxx>
> ---
>  include/libvirt/libvirt.h.in |  1 +
>  src/qemu/qemu_migration.c    | 40 ++++++++++++++++++++++++++++++++++++++++
>  src/qemu/qemu_migration.h    |  3 ++-
>  src/qemu/qemu_monitor.c      |  2 +-
>  src/qemu/qemu_monitor.h      |  1 +
>  tools/virsh-domain.c         |  7 +++++++
>  6 files changed, 52 insertions(+), 2 deletions(-)
> 
> diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
> index 295d551..c0fc08b 100644
> --- a/include/libvirt/libvirt.h.in
> +++ b/include/libvirt/libvirt.h.in
> @@ -1200,6 +1200,7 @@ typedef enum {
>      VIR_MIGRATE_OFFLINE           = (1 << 10), /* offline migrate */
>      VIR_MIGRATE_COMPRESSED        = (1 << 11), /* compress data during migration */
>      VIR_MIGRATE_ABORT_ON_ERROR    = (1 << 12), /* abort migration on I/O errors happened during migration */
> +    VIR_MIGRATE_AUTO_CONVERGE     = (1 << 13), /* force convergence */
>  } virDomainMigrateFlags;

Since VIR_MIGRATE_AUTO_CONVERGE is a source-only flag now (destination
host does not do anything if it sees it), we should not even send it
there. Otherwise migration with this flag set would be impossible to a
host with older libvirtd that does not support this new flag. It is the
same situation as with VIR_MIGRATE_ABORT_ON_ERROR. Otherwise the patch
is good. And since it took me so long to look at this patch (I was sick
and then I forgot about it), I fixed this for you.

ACK with the following patch squashed in and pushed.

Jirka

diff --git i/src/libvirt.c w/src/libvirt.c
index 2201b07..c5c3136 100644
--- i/src/libvirt.c
+++ w/src/libvirt.c
@@ -4408,7 +4408,8 @@ virDomainMigrateVersion1(virDomainPtr domain,
     if (ret == 0 && info.state == VIR_DOMAIN_PAUSED)
         flags |= VIR_MIGRATE_PAUSED;
 
-    destflags = flags & ~VIR_MIGRATE_ABORT_ON_ERROR;
+    destflags = flags & ~(VIR_MIGRATE_ABORT_ON_ERROR |
+                          VIR_MIGRATE_AUTO_CONVERGE);
 
     /* Prepare the migration.
      *
@@ -4538,7 +4539,8 @@ virDomainMigrateVersion2(virDomainPtr domain,
     if (ret == 0 && info.state == VIR_DOMAIN_PAUSED)
         flags |= VIR_MIGRATE_PAUSED;
 
-    destflags = flags & ~VIR_MIGRATE_ABORT_ON_ERROR;
+    destflags = flags & ~(VIR_MIGRATE_ABORT_ON_ERROR |
+                          VIR_MIGRATE_AUTO_CONVERGE);
 
     VIR_DEBUG("Prepare2 %p flags=%lx", dconn, destflags);
     ret = dconn->driver->domainMigratePrepare2
@@ -4710,7 +4712,8 @@ virDomainMigrateVersion3Full(virDomainPtr domain,
     if (ret == 0 && state == VIR_DOMAIN_PAUSED)
         flags |= VIR_MIGRATE_PAUSED;
 
-    destflags = flags & ~VIR_MIGRATE_ABORT_ON_ERROR;
+    destflags = flags & ~(VIR_MIGRATE_ABORT_ON_ERROR |
+                          VIR_MIGRATE_AUTO_CONVERGE);
 
     VIR_DEBUG("Prepare3 %p flags=%x", dconn, destflags);
     cookiein = cookieout;
diff --git i/src/qemu/qemu_migration.c w/src/qemu/qemu_migration.c
index cbb3d2f..57e2436 100644
--- i/src/qemu/qemu_migration.c
+++ w/src/qemu/qemu_migration.c
@@ -3627,7 +3627,8 @@ static int doPeer2PeerMigrate2(virQEMUDriverPtr driver,
     if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_PAUSED)
         flags |= VIR_MIGRATE_PAUSED;
 
-    destflags = flags & ~VIR_MIGRATE_ABORT_ON_ERROR;
+    destflags = flags & ~(VIR_MIGRATE_ABORT_ON_ERROR |
+                          VIR_MIGRATE_AUTO_CONVERGE);
 
     VIR_DEBUG("Prepare2 %p", dconn);
     if (flags & VIR_MIGRATE_TUNNELLED) {
@@ -3820,7 +3821,8 @@ doPeer2PeerMigrate3(virQEMUDriverPtr driver,
     if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_PAUSED)
         flags |= VIR_MIGRATE_PAUSED;
 
-    destflags = flags & ~VIR_MIGRATE_ABORT_ON_ERROR;
+    destflags = flags & ~(VIR_MIGRATE_ABORT_ON_ERROR |
+                          VIR_MIGRATE_AUTO_CONVERGE);
 
     VIR_DEBUG("Prepare3 %p", dconn);
     cookiein = cookieout;

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]