I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 : mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send command '{"execute":"qmp_capabilities","id":"libvirt-1"}' for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG: mon=0x14a53da0 msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the even loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose().
Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>
---
It turned out the hack from v1 is no longer needed. In fact, my reasoning there
flavouring the hack was flawed.
src/qemu/qemu_capabilities.c | 14 ++++++++++----
src/qemu/qemu_monitor.c | 4 +++-
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 7c39c1c..17095b4 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -2587,7 +2587,8 @@ virQEMUCapsInitQMP(virQEMUCapsPtr qemuCaps,
char *monpath = NULL;
char *pidfile = NULL;
pid_t pid = 0;
- virDomainObj vm;
+ virDomainObjPtr vm = NULL;
+ virDomainXMLOptionPtr xmlopt = NULL;
/* the ".sock" sufix is important to avoid a possible clash with a qemu
* domain called "capabilities"
@@ -2650,10 +2651,13 @@ virQEMUCapsInitQMP(virQEMUCapsPtr qemuCaps,
goto cleanup;
}
- memset(&vm, 0, sizeof(vm));
- vm.pid = pid;
+ if (!(xmlopt = virDomainXMLOptionNew(NULL, NULL, NULL)) ||
+ !(vm = virDomainObjNew(xmlopt)))
+ goto cleanup;
+
+ vm->pid = pid;
- if (!(mon = qemuMonitorOpen(&vm, &config, true, &callbacks, NULL))) {
+ if (!(mon = qemuMonitorOpen(vm, &config, true, &callbacks, NULL))) {
ret = 0;
goto cleanup;
}
@@ -2673,6 +2677,8 @@ cleanup:
virCommandFree(cmd);
VIR_FREE(monarg);
VIR_FREE(monpath);
+ virObjectUnref(vm);
+ virObjectUnref(xmlopt);
if (pid != 0) {
char ebuf[1024];
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index a601ee0..2bafe28 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -255,6 +255,8 @@ static void qemuMonitorDispose(void *obj)
VIR_DEBUG("mon=%p", mon);
if (mon->cb && mon->cb->destroy)
(mon->cb->destroy)(mon, mon->vm, mon->callbackOpaque);
+ virObjectUnref(mon->vm);
+
virCondDestroy(&mon->notify);
VIR_FREE(mon->buffer);
virJSONValueFree(mon->options);
@@ -781,7 +783,7 @@ qemuMonitorOpenInternal(virDomainObjPtr vm,
}
mon->fd = fd;
mon->hasSendFD = hasSendFD;
- mon->vm = vm;
+ mon->vm = virObjectRef(vm);
mon->json = json;
if (json)
mon->waitGreeting = true;
--
1.8.1.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list