Am 05.07.2013 03:36, schrieb Gao feng: > On 07/05/2013 04:45 AM, Richard Weinberger wrote: >> Hi, >> >> Am 03.07.2013 12:04, schrieb Gao feng: >>> Hi, >>> On 07/01/2013 03:45 PM, Richard Weinberger wrote: >>>> Hi! >>>> >>>> If you have multiple LXC containers with networking and the autostart feature enabled libvirtd fails to >>>> up some veth interfaces on the host side. >>>> >>>> Most of the time only the first veth device is in state up, all others are down. >>>> >>>> Reproducing is easy. >>>> 1. Define a few containers (5 in my case) >>>> 2. Run "virsh autostart ..." on each one. >>>> 3. stop/start libvirtd >>>> >>>> You'll observe that all containers are running, but "ip a" will report on the host >>>> side that not all veth devices are up and are not usable within the containers. >>>> >>>> This is not userns related, just retested with libvirt of today. >>> >>> I can not reproduce this problem on my test bed... >> >> Strange. >> >>> maybe you should wait some seconds for the starting of these containers. >> >> Please see the attached shell script. Using it I'm able to trigger the issue on all of >> my test machines. >> run.sh creates six very minimal containers and enables autostart. Then it kills and restarts libvirtd. >> After the script is done you'll see that only one or two veth devices are up. >> >> On the over hand, if I start them manually using a command like this one: >> for cfg in a b c d e f ; do /opt/libvirt/bin/virsh -c lxc:/// start test-$cfg ; done >> All veths are always up. >> > > > I still can not reproduce even use your script. > > [root@Donkey-I5 Desktop]# ./run.sh > Domain test-a defined from container_a.conf > > Domain test-a marked as autostarted > > Domain test-b defined from container_b.conf > > Domain test-b marked as autostarted > > Domain test-c defined from container_c.conf > > Domain test-c marked as autostarted > > Domain test-d defined from container_d.conf > > Domain test-d marked as autostarted > > Domain test-e defined from container_e.conf > > Domain test-e marked as autostarted > > Domain test-f defined from container_f.conf > > Domain test-f marked as autostarted > > 2013-07-05 01:26:47.155+0000: 27163: info : libvirt version: 1.1.0 > 2013-07-05 01:26:47.155+0000: 27163: debug : virLogParseOutputs:1334 : outputs=1:file:/home/gaofeng/libvirtd.log > waiting a bit.... > 167: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > 169: veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > 171: veth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > 173: veth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > 175: veth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > 177: veth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 > > > Can you post your libvirt debug log? Please see attached file. 43: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 45: veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 47: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 49: veth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 51: veth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000 53: veth5: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 100 Thanks, //richard
Attachment:
debug.log.bz2
Description: application/bzip
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list