Vfb entries in domain config are used only by PV drivers. Qemu
parameters are build based on b_info struct. So fill it with the same
data as vfb entries (actually the first one).
This will additionally allow graphic-less domain, when no <graphics/>
entries are present in domain XML (previously VNC was always enabled).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx>
---
src/libxl/libxl_conf.c | 114 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 82 insertions(+), 32 deletions(-)
diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
index 623956e..e5d8dc5 100644
--- a/src/libxl/libxl_conf.c
+++ b/src/libxl/libxl_conf.c
@@ -332,7 +332,56 @@ error:
}
static int
-libxlMakeDomBuildInfo(virDomainDefPtr def, libxl_domain_config *d_config)
+libxlMakeVNCInfo(libxlDriverPrivatePtr driver,
+ virDomainGraphicsDefPtr l_vfb,
+ libxl_vnc_info *x_vnc)
+{
+ unsigned short port;
+ const char *listenAddr;
+
+ libxl_defbool_set(&x_vnc->enable, 1);
+ /* driver handles selection of free port */
+ libxl_defbool_set(&x_vnc->findunused, 0);
+ if (l_vfb->data.vnc.autoport) {
+
+ if (virPortAllocatorAcquire(driver->reservedVNCPorts, &port) < 0)
+ return -1;
+ if (port == 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ "%s", _("Unable to find an unused VNC port"));
+ return -1;
+ }
+ l_vfb->data.vnc.port = port;
+ }
+ x_vnc->display = l_vfb->data.vnc.port - LIBXL_VNC_PORT_MIN;
+
+ listenAddr = virDomainGraphicsListenGetAddress(l_vfb, 0);
+ if (listenAddr) {
+ /* libxl_device_vfb_init() does strdup("127.0.0.1") */
+ VIR_FREE(x_vnc->listen);
+ if (VIR_STRDUP(x_vnc->listen, listenAddr) < 0) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int
+libxlMakeSDLInfo(virDomainGraphicsDefPtr l_vfb,
+ libxl_sdl_info *x_sdl)
+{
+ libxl_defbool_set(&x_sdl->enable, 1);
+ if (VIR_STRDUP(x_sdl->display, l_vfb->data.sdl.display) < 0)
+ return -1;
+ if (VIR_STRDUP(x_sdl->xauthority, l_vfb->data.sdl.xauth) < 0)
+ return -1;
+ return 0;
+}
+
+static int
+libxlMakeDomBuildInfo(libxlDriverPrivatePtr driver,
+ virDomainDefPtr def,
+ libxl_domain_config *d_config)
{
libxl_domain_build_info *b_info = &d_config->b_info;
int hvm = STREQ(def->os.type, "hvm");
@@ -404,6 +453,34 @@ libxlMakeDomBuildInfo(virDomainDefPtr def, libxl_domain_config *d_config)
if (VIR_STRDUP(b_info->u.hvm.boot, bootorder) < 0)
goto error;
+ /* Disable VNC and SDL until explicitly enabled */
+ libxl_defbool_set(&b_info->u.hvm.vnc.enable, 0);
+ libxl_defbool_set(&b_info->u.hvm.sdl.enable, 0);
+
+ for (i = 0; i < def->ngraphics; i++) {
+ switch (def->graphics[i]->type) {
+ case VIR_DOMAIN_GRAPHICS_TYPE_VNC:
+ if (libxl_defbool_val(b_info->u.hvm.vnc.enable))
+ continue;
+ if (libxlMakeVNCInfo(driver, def->graphics[i],
+ &b_info->u.hvm.vnc) < 0)
+ goto error;
+ if (def->graphics[i]->data.vnc.keymap &&
+ (b_info->u.hvm.keymap =
+ strdup(def->graphics[i]->data.vnc.keymap)) == NULL) {
+ virReportOOMError();
+ goto error;
+ }
+ break;
+ case VIR_DOMAIN_GRAPHICS_TYPE_SDL:
+ if (libxl_defbool_val(b_info->u.hvm.sdl.enable))
+ continue;
+ if (libxlMakeSDLInfo(def->graphics[i], &b_info->u.hvm.sdl) < 0)
+ goto error;
+ break;
+ }
+ }
+
/*
* The following comment and calculation were taken directly from
* libxenlight's internal function libxl_get_required_shadow_memory():
@@ -679,41 +756,14 @@ libxlMakeVfb(libxlDriverPrivatePtr driver,
virDomainGraphicsDefPtr l_vfb,
libxl_device_vfb *x_vfb)
{
- unsigned short port;
- const char *listenAddr;
-
switch (l_vfb->type) {
case VIR_DOMAIN_GRAPHICS_TYPE_SDL:
- libxl_defbool_set(&x_vfb->sdl.enable, 1);
- if (VIR_STRDUP(x_vfb->sdl.display, l_vfb->data.sdl.display) < 0)
- return -1;
- if (VIR_STRDUP(x_vfb->sdl.xauthority, l_vfb->data.sdl.xauth) < 0)
+ if (libxlMakeSDLInfo(l_vfb, &x_vfb->sdl) < 0)
return -1;
break;
case VIR_DOMAIN_GRAPHICS_TYPE_VNC:
- libxl_defbool_set(&x_vfb->vnc.enable, 1);
- /* driver handles selection of free port */
- libxl_defbool_set(&x_vfb->vnc.findunused, 0);
- if (l_vfb->data.vnc.autoport) {
-
- if (virPortAllocatorAcquire(driver->reservedVNCPorts, &port) < 0)
- return -1;
- if (port == 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- "%s", _("Unable to find an unused VNC port"));
- return -1;
- }
- l_vfb->data.vnc.port = port;
- }
- x_vfb->vnc.display = l_vfb->data.vnc.port - LIBXL_VNC_PORT_MIN;
-
- listenAddr = virDomainGraphicsListenGetAddress(l_vfb, 0);
- if (listenAddr) {
- /* libxl_device_vfb_init() does VIR_STRDUP("127.0.0.1") */
- VIR_FREE(x_vfb->vnc.listen);
- if (VIR_STRDUP(x_vfb->vnc.listen, listenAddr) < 0)
- return -1;
- }
+ if (libxlMakeVNCInfo(driver, l_vfb, &x_vfb->vnc) < 0)
+ return -1;
if (VIR_STRDUP(x_vfb->keymap, l_vfb->data.vnc.keymap) < 0)
return -1;
break;
@@ -812,7 +862,7 @@ libxlBuildDomainConfig(libxlDriverPrivatePtr driver,
if (libxlMakeDomCreateInfo(driver, def, &d_config->c_info) < 0)
return -1;
- if (libxlMakeDomBuildInfo(def, d_config) < 0) {
+ if (libxlMakeDomBuildInfo(driver, def, d_config) < 0) {
return -1;
}
--
1.8.1.4
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list