Re: [PATCH 21/25] conf: Introduce sgio for hostdev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/05/13 03:17, John Ferlan wrote:
On 05/03/2013 02:07 PM, Osier Yang wrote:
"sgio" is only valid for scsi host device.
---
  docs/formatdomain.html.in                          |  7 ++++-
  docs/schemas/domaincommon.rng                      |  8 +++++
  src/conf/domain_conf.c                             | 34 ++++++++++++++++++---
  src/conf/domain_conf.h                             |  1 +
  .../qemuxml2argv-hostdev-scsi-sgio.xml             | 35 ++++++++++++++++++++++
  tests/qemuxml2xmltest.c                            |  1 +
  6 files changed, 81 insertions(+), 5 deletions(-)
  create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-sgio.xml

diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 6437d6d..89d11e7 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2319,7 +2319,12 @@
          and <code>virNodeDeviceReAttach</code> (or <code>virsh
          nodedev-reattach</code>) after hot-unplug or stopping the
          guest. For SCSI device, user is responsible to make sure the device
-        is not used by host.</dd>
+        is not used by host.
+        The optional <code>sgio</code> (<span class="since">since 1.0.6</span>)
+        attribute indicates whether the kernel will filter unprivileged
+        SG_IO commands for the disk, valid settings are "filtered" or
+        "unfiltered". Defaults to "filtered".
+      </dd>
        <dt><code>source</code></dt>
        <dd>The source element describes the device as seen from the host.
        The USB device can either be addressed by vendor / product id using the
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index ca79e67..0a59c7a 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -3179,6 +3179,14 @@
      <attribute name="type">
        <value>scsi</value>
      </attribute>
+    <optional>
+      <attribute name="sgio">
+        <choice>
+          <value>filtered</value>
+          <value>unfiltered</value>
+        </choice>
+      </attribute>
+    </optional>
      <element name="source">
        <interleave>
          <ref name="sourceinfoadapter"/>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 9823b9c..d604e5b 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -3784,6 +3784,7 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
  {
      xmlNodePtr sourcenode;
      char *managed = NULL;
+    char *sgio = NULL;
      char *backendStr = NULL;
      int backend;
      int ret = -1;
@@ -3798,6 +3799,8 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
              def->managed = true;
      }
+ sgio = virXMLPropString(node, "sgio");
+
      /* @type is passed in from the caller rather than read from the
       * xml document, because it is specified in different places for
       * different kinds of defs - it is an attribute of
@@ -3834,6 +3837,22 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
          goto error;
      }
+ if (sgio) {
+        if (def->source.subsys.type !=
+            VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) {
+            virReportError(VIR_ERR_XML_ERROR, "%s",
+                           _("sgio is only supported for scsi host device"));
+            goto error;
+        }
+
+        if ((def->source.subsys.u.scsi.sgio =
+             virDomainDeviceSGIOTypeFromString(sgio)) <= 0) {
+            virReportError(VIR_ERR_XML_ERROR,
+                           _("unknown sgio mode '%s'"), sgio);
+            goto error;
+        }
+    }
+
      switch (def->source.subsys.type) {
      case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
          if (virDomainHostdevSubsysPciDefParseXML(sourcenode, def, flags) < 0)
@@ -3872,6 +3891,7 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
      ret = 0;
  error:
      VIR_FREE(managed);
+    VIR_FREE(sgio);
      VIR_FREE(backendStr);
      return ret;
  }
@@ -15464,11 +15484,17 @@ virDomainHostdevDefFormat(virBufferPtr buf,
virBufferAsprintf(buf, " <hostdev mode='%s' type='%s'",
                        mode, type);
-    if (def->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
-        virBufferAsprintf(buf, " managed='%s'>\n",
+    if (def->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
+        virBufferAsprintf(buf, " managed='%s'",
                            def->managed ? "yes" : "no");
-    else
-        virBufferAddLit(buf, ">\n");
+
+        if (def->source.subsys.type ==
+            VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI &&
+            def->source.subsys.u.scsi.sgio)
+            virBufferAsprintf(buf, " sgio='%s'",
+                              virDomainDeviceSGIOTypeToString(def->source.subsys.u.scsi.sgio));
+    }
+    virBufferAddLit(buf, ">\n");
virBufferAdjustIndent(buf, 6);
      switch (def->mode) {
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 59cf6a7..8d67e67 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -423,6 +423,7 @@ struct _virDomainHostdevSubsys {
              unsigned bus;
              unsigned target;
              unsigned unit;
+            int sgio; /* enum virDomainDeviceSGIO */
          } scsi;
      } u;
  };
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-sgio.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-sgio.xml
new file mode 100644
index 0000000..21404ee
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-sgio.xml
@@ -0,0 +1,35 @@
+<domain type='qemu'>
+  <name>QEMUGuest2</name>
+  <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid>
+  <memory unit='KiB'>219100</memory>
+  <currentMemory unit='KiB'>219100</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <os>
+    <type arch='i686' machine='pc'>hvm</type>
+    <boot dev='hd'/>
+  </os>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu</emulator>
+    <disk type='block' device='disk'>
+      <source dev='/dev/HostVG/QEMUGuest2'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <controller type='scsi' index='0' model='virtio-scsi'/>
+    <controller type='usb' index='0'/>
+    <controller type='ide' index='0'/>
+    <controller type='pci' index='0' model='pci-root'/>
+    <hostdev mode='subsystem' type='scsi' managed='yes' sgio='unfiltered'>
+      <source>
+        <adapter name='scsi_host0'/>
+        <address bus='0' target='0' unit='0'/>
+      </source>
+      <address type='drive' controller='0' bus='0' target='4' unit='8'/>
+    </hostdev>
+    <memballoon model='virtio'/>
+  </devices>
+</domain>
diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
index d37a657..04be8dd 100644
--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
@@ -289,6 +289,7 @@ mymain(void)
      DO_TEST("hostdev-scsi-virtio-scsi");
      DO_TEST("hostdev-scsi-readonly");
      DO_TEST("hostdev-scsi-shareable");
+    DO_TEST("hostdev-scsi-sgio");
NIT: should this be "scsi-unfiltered-sgio" since the default is filtered
and you're testing the unfiltered mode...  Probably changes the xml file
name too.

It's not a deal breaker...  ACK otherwise.


I'd like keep it,  one can also define "filtered" mode in the same XML
for a different device.

Pushed.

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]