Re: [PATCHv3] Configure native vlan modes on Open vSwitch ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Fri, 2013-05-10 at 14:10 -0400, Laine Stump wrote:
> On 04/30/2013 02:12 PM, james robson wrote:
> > This patch adds functionality to allow libvirt to configure the
> > 'native-tagged' and 'native-untagged' modes on openvswitch networks.
> >
> > v2 changes:
> > Fix problems reported by Eric Blake
> >
> > v3 changes:
> > Re work patch to address review comments
> >
> > ---
> >
> >
> > diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
> > index 888c005..5278534 100644
> > --- a/docs/formatdomain.html.in
> > +++ b/docs/formatdomain.html.in
> > @@ -3290,6 +3290,13 @@ qemu-kvm -net nic,model=? /dev/null
> >          <parameters
> > interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
> >        </virtualport>
> >      </interface>
> > +    <interface type='bridge'>
> > +      <b>&lt;vlan trunk='yes'&gt;</b>
> > +        <b>&lt;tag id='42'/&gt;</b>
> > +        <b>&lt;tag id='123' nativeMode='untagged'/&gt;</b>
> > +      <b>&lt;/vlan&gt;</b>
> > +      ...
> > +    &lt;/interface&gt;
> >    &lt;devices&gt;
> >    ...</pre>
> >  
> > @@ -3316,6 +3323,15 @@ qemu-kvm -net nic,model=? /dev/null
> >        vlan element.
> >      </p>
> >  
> > +    <p>
> > +      For network connections using openvswitch it is possible to
> > +      configure the 'native-tagged' and 'native-untagged' vlan modes
> > +      <span class="since">(Since 1.0.6).</span> This uses the optional
> > +      <code>nativeMode</code> attribute on the <code>&lt;tag&gt;</code>
> > +      element: <code>nativeMode</code> may be set to 'tagged' or
> > +      'untagged'. The id atribute of the element sets the native vlan.
> > +    </p>
> > +
> >      <h5><a name="elementLink">Modifying virtual link state</a></h5>
> >  <pre>
> >    ...
> > diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
> > index 4dd0415..e065ca4 100644
> > --- a/docs/formatnetwork.html.in
> > +++ b/docs/formatnetwork.html.in
> > @@ -414,6 +414,7 @@
> >          <span class="since">Since 0.9.4</span>
> >        </p>
> >  
> > +
> >      <h5><a name="elementVlanTag">Setting VLAN tag (on supported network
> > types only)</a></h5>
> >  
> >  <pre>
> > @@ -429,6 +430,13 @@
> >          &lt;parameters
> > interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/&gt;
> >        &lt;/virtualport&gt;
> >      &lt;/interface&gt;
> > +    &lt;interface type='bridge'&gt;
> > +      <b>&lt;vlan trunk='yes'&gt;</b>
> > +        <b>&lt;tag id='42'/&gt;</b>
> > +        <b>&lt;tag id='123' nativeMode='untagged'/&gt;</b>
> > +      <b>&lt;/vlan&gt;</b>
> > +      ...
> > +    &lt;/interface&gt;
> >    &lt;devices&gt;
> >    ...</pre>
> >  
> > @@ -452,6 +460,14 @@
> >        be added to the vlan element.
> >      </p>
> >      <p>
> > +      For network connections using openvswitch it is possible to
> > +      configure the 'native-tagged' and 'native-untagged' vlan modes
> > +      <span class="since">(Since 1.0.6).</span> This uses the optional
> > +      <code>nativeMode</code> attribute on the <code>&lt;tag&gt;</code>
> > +      element: <code>nativeMode</code> may be set to 'tagged' or
> > +      'untagged'. The id atribute of the element sets the native vlan.
> > +    </p>
> > +    <p>
> >        <code>&lt;vlan&gt;</code> elements can also be specified in
> >        a <code>&lt;portgroup&gt;</code> element, as well as directly in
> >        a domain's <code>&lt;interface&gt;</code> element. In the case
> > diff --git a/docs/schemas/networkcommon.rng
> > b/docs/schemas/networkcommon.rng
> > index 51ff759..e60f1fc 100644
> > --- a/docs/schemas/networkcommon.rng
> > +++ b/docs/schemas/networkcommon.rng
> > @@ -204,6 +204,14 @@
> >                <param name="maxInclusive">4095</param>
> >              </data>
> >            </attribute>
> > +          <optional>
> > +            <attribute name="nativeMode">
> > +              <choice>
> > +                <value>tagged</value>
> > +                <value>untagged</value>
> > +              </choice>
> > +            </attribute>
> > +          </optional>
> >            <empty/>
> >          </element>
> >        </oneOrMore>
> > diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
> > index 13ba8c6..dd5b64e 100644
> > --- a/src/conf/netdev_vlan_conf.c
> > +++ b/src/conf/netdev_vlan_conf.c
> > @@ -17,6 +17,7 @@
> >   *
> >   * Authors:
> >   *     Laine Stump <laine@xxxxxxxxxx>
> > + *     James Robson <jrobson@xxxxxxxxxxxx>
> >   */
> >  
> >  #include <config.h>
> > @@ -33,6 +34,7 @@ virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr
> > ctxt, virNetDevVlanPtr de
> >      int ret = -1;
> >      xmlNodePtr save = ctxt->node;
> >      const char *trunk = NULL;
> > +    const char *nativeMode = NULL;
> >      xmlNodePtr *tagNodes = NULL;
> >      int nTags, ii;
> >  
> > @@ -54,6 +56,8 @@ virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr
> > ctxt, virNetDevVlanPtr de
> >          goto error;
> >      }
> >  
> > +    def->nativeMode = 0;
> > +    def->nativeTag = 0;
> >      for (ii = 0; ii < nTags; ii++) {
> >          unsigned long id;
> >  
> > @@ -68,6 +72,21 @@ virNetDevVlanParse(xmlNodePtr node,
> > xmlXPathContextPtr ctxt, virNetDevVlanPtr de
> >                             _("vlan tag id %lu too large (maximum
> > 4095)"), id);
> >              goto error;
> >          }
> > +        if ((nativeMode = virXPathString("string(./@nativeMode)",
> > ctxt)) != NULL) {
> > +            if (STRCASENEQ(nativeMode, "tagged") &&
> > STRCASENEQ(nativeMode, "untagged")) {
> > +                virReportError(VIR_ERR_XML_ERROR,
> > +                               _("invalid \"nativeMode='%s'\" in <tag>
> > - "
> > +                                 "native_mode must be 'tagged' or
> > 'untagged'"), nativeMode);
> > +                goto error;
> > +            }
> > +            if (def->nativeMode != 0) {
> > +                virReportError(VIR_ERR_XML_ERROR, "%s",
> > +                               _("duplicate native vlan setting"));
> > +                goto error;
> > +            }
> > +            def->nativeMode = STRCASEEQ(nativeMode, "tagged") ? 1 : 2;
> 
> We prefer for things like this to have an enum defined, and use the
> ${enum-type-name}Type(To|From)String to convert between the string and
> the numeric value. Then in the code that uses the value, we compare to
> the enum rather than a plain number. For example, you can search for
> virDomainHostdevSubsys in src/conf/domain_conf.[ch]. Basically you need:
> 
> * in the .h file:
> 
>   typedef enum {
>       VIR_WHATEVER_NAME_TYPE_DEFAULT = 0,
>       VIR_WHATEVER_NAME_TYPE_ONE,
>       VIR_WHATEVER_NAME_TYPE_ANOTHER,
> 
>       VIR_WHATEVER_NAME_TYPE_LAST
>   } virWhateverNameType;
> 
> VIR_ENUM_DECL(virWhateverName)
> 
> * in the .c file:
> 
> VIR_ENUM_IMPL(virWhateverName, VIR_WHATEVER_NAME_TYPE_LAST,
>               "default", "one", "another")
> 
> * at the place you parse:
> 
>  if ((def->whatever = virWhateverTypeFromString(type)) <= 0) {
>      virReportError(.....);
>      goto error/cleanup;
>  }
> 
> * at the place you format:
> 
> if (def->whatever) {
>     const char *whateverStr = virWhateverTypeToString(def->whatever);
> 
>     if (!whatever) {
>        virReportError(VIR_ERR_INTERNAL_ERROR, "Bad whatever value"...);
>        goto error/cleanup;
>     }
>     virAsprintf(buf, " whatever='%s', whateverStr);
> 
> * in the code that implements it:
> 
> switch (def->whatever) {
> case VIR_WHATEVER_NAME_TYPE_ONE:
>     blah;
>     break;
> case VIR_WHATEVER_NAME_TYPE_ANOTHER:
>     bleh;
>     break;
> case VIR_WHATEVER_NAME_TYPE_DEFAULT:
> default:
>     break;
> }
> 
> or something like that.
> 

Ok, I can look at cleaning that up.

> 
> > +            def->nativeTag = id;
> > +        }
> >          def->tag[ii] = id;
> >      }
> >  
> > @@ -89,6 +108,12 @@ virNetDevVlanParse(xmlNodePtr node,
> > xmlXPathContextPtr ctxt, virNetDevVlanPtr de
> >                                   "is required for more than one vlan
> > tag"), trunk);
> >                  goto error;
> >              }
> > +            if (def->nativeMode != 0) {
> > +                virReportError(VIR_ERR_XML_ERROR, "%s",
> > +                               _("invalid configuration in <vlan> -
> > \"trunk='no'\" is "
> > +                                 "not allowed with a native vlan id"));
> > +                goto error;
> > +            }
> >              /* allow (but discard) "trunk='no' if there is a single tag
> > */
> >              if (STRCASENEQ(trunk, "no")) {
> >                  virReportError(VIR_ERR_XML_ERROR,
> > @@ -125,7 +150,11 @@ virNetDevVlanFormat(virNetDevVlanPtr def,
> > virBufferPtr buf)
> >  
> >      virBufferAsprintf(buf, "<vlan%s>\n", def->trunk ? " trunk='yes'" :
> > "");
> >      for (ii = 0; ii < def->nTags; ii++) {
> > -        virBufferAsprintf(buf, "  <tag id='%u'/>\n", def->tag[ii]);
> > +        if (def->nativeTag == def->tag[ii]) {
> > +            virBufferAsprintf(buf, "  <tag id='%u' nativeMode='%
> > s'/>\n", def->tag[ii], def->nativeMode == 1 ? "tagged" : "untagged");
> > +        } else {
> > +            virBufferAsprintf(buf, "  <tag id='%u'/>\n", def->tag[ii]);
> > +        }
> >      }
> >      virBufferAddLit(buf, "</vlan>\n");
> >      return 0;
> > diff --git a/src/util/virnetdevopenvswitch.c
> > b/src/util/virnetdevopenvswitch.c
> > index 4fe077a..69cc1ac 100644
> > --- a/src/util/virnetdevopenvswitch.c
> > +++ b/src/util/virnetdevopenvswitch.c
> > @@ -19,6 +19,7 @@
> >   *     Dan Wendlandt <dan@xxxxxxxxxx>
> >   *     Kyle Mestery <kmestery@xxxxxxxxx>
> >   *     Ansis Atteka <aatteka@xxxxxxxxxx>
> > + *     James Robson <jrobson@xxxxxxxxxxxx>
> 
> The author list in our files usually only contains the original authors
> of the file and those who have contributed a "substantial" portion after
> creation.

Is there any guidance on what qualifies as "substantial"? I accept that
the change to util/virnetdevopenvswitch.c was very small, as is the
change to util/virnetdevvlan.h. What about the other files?

> 
> >   */
> >  
> >  #include <config.h>
> > @@ -108,8 +109,13 @@ int virNetDevOpenvswitchAddPort(const char *brname,
> > const char *ifname,
> >      virCommandAddArgList(cmd, "--timeout=5", "--", "--may-exist",
> > "add-port",
> >                          brname, ifname, NULL);
> >  
> > -    if (virBufferUse(&buf) != 0)
> > +    if (virBufferUse(&buf) != 0) {
> > +        if (virtVlan->nativeMode > 0) {
> > +            virCommandAddArgFormat(cmd, "vlan_mode=%s",
> > virtVlan->nativeMode == 1 ? "native-tagged" : "native-untagged");
> > +            virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
> > +        }
> >          virCommandAddArgList(cmd, virBufferCurrentContent(&buf), NULL);
> > +    }
> >  
> >      if (ovsport->profileID[0] == '\0') {
> >          virCommandAddArgList(cmd,
> > diff --git a/src/util/virnetdevvlan.c b/src/util/virnetdevvlan.c
> > index 2fe2017..b81c037 100644
> > --- a/src/util/virnetdevvlan.c
> > +++ b/src/util/virnetdevvlan.c
> > @@ -17,6 +17,7 @@
> >   *
> >   * Authors:
> >   *      Laine Stump <laine@xxxxxxxxxx>
> > + *      James Robson <jrobson@xxxxxxxxxxxx>
> >   */
> >  
> >  #include <config.h>
> > @@ -33,6 +34,8 @@ virNetDevVlanClear(virNetDevVlanPtr vlan)
> >  {
> >      VIR_FREE(vlan->tag);
> >      vlan->nTags = 0;
> > +    vlan->nativeMode = 0;
> > +    vlan->nativeTag = 0;
> >  }
> >  
> >  void
> > @@ -54,7 +57,9 @@ virNetDevVlanEqual(const virNetDevVlanPtr a, const
> > virNetDevVlanPtr b)
> >          return false;
> >  
> >      if (a->trunk != b->trunk ||
> > -        a->nTags != b->nTags) {
> > +        a->nTags != b->nTags ||
> > +        a->nativeMode != b->nativeMode ||
> > +        a->nativeTag != b->nativeTag) {
> >          return false;
> >      }
> >  
> > @@ -89,6 +94,8 @@ virNetDevVlanCopy(virNetDevVlanPtr dst, const
> > virNetDevVlanPtr src)
> >  
> >      dst->trunk = src->trunk;
> >      dst->nTags = src->nTags;
> > +    dst->nativeMode = src->nativeMode;
> > +    dst->nativeTag = src->nativeTag;
> >      memcpy(dst->tag, src->tag, src->nTags * sizeof(*src->tag));
> >      return 0;
> >  }
> > diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
> > index c6b16ef..93426cc 100644
> > --- a/src/util/virnetdevvlan.h
> > +++ b/src/util/virnetdevvlan.h
> > @@ -17,6 +17,7 @@
> >   *
> >   * Authors:
> >   *      Laine Stump <laine@xxxxxxxxxx>
> > + *      James Robson <jrobson@xxxxxxxxxxxx>
> >   */
> >  
> >  #ifndef __VIR_NETDEV_VLAN_H__
> > @@ -28,6 +29,8 @@ struct _virNetDevVlan {
> >      bool trunk;        /* true if this is a trunk */
> >      int nTags;          /* number of tags in array */
> >      unsigned int *tag; /* pointer to array of tags */
> > +    short int nativeMode; /* 0=off, 1=tagged, 2=untagged */
> > +    unsigned int nativeTag;
> >  };
> >  
> >  void virNetDevVlanClear(virNetDevVlanPtr vlan);
> > diff --git a/tests/networkxml2xmlin/openvswitch-net.xml
> > b/tests/networkxml2xmlin/openvswitch-net.xml
> > index a3d82b1..2f6084d 100644
> > --- a/tests/networkxml2xmlin/openvswitch-net.xml
> > +++ b/tests/networkxml2xmlin/openvswitch-net.xml
> > @@ -21,4 +21,13 @@
> >        <parameters profileid='alice-profile'/>
> >      </virtualport>
> >    </portgroup>
> > +  <portgroup name='native'>
> > +    <vlan trunk='yes'>
> > +      <tag id='123' nativeMode='tagged'/>
> > +      <tag id='444'/>
> > +    </vlan>
> > +    <virtualport>
> > +      <parameters profileid='native-profile'/>
> > +    </virtualport>
> > +  </portgroup>
> >  </network>
> > diff --git a/tests/networkxml2xmlout/openvswitch-net.xml
> > b/tests/networkxml2xmlout/openvswitch-net.xml
> > index a3d82b1..2f6084d 100644
> > --- a/tests/networkxml2xmlout/openvswitch-net.xml
> > +++ b/tests/networkxml2xmlout/openvswitch-net.xml
> > @@ -21,4 +21,13 @@
> >        <parameters profileid='alice-profile'/>
> >      </virtualport>
> >    </portgroup>
> > +  <portgroup name='native'>
> > +    <vlan trunk='yes'>
> > +      <tag id='123' nativeMode='tagged'/>
> > +      <tag id='444'/>
> > +    </vlan>
> > +    <virtualport>
> > +      <parameters profileid='native-profile'/>
> > +    </virtualport>
> > +  </portgroup>
> >  </network>
> >
> >
> >
> 
> 
> Those are the only issues I see with this patch now.
> 
> Kyle - what is your opinion of implementing the config this way. Does it
> seem workable? Or was my ignorance of the subject matter showing when I
> suggested putting "nativeMode='tagged'" as an attribute of a tag (rather
> than putting "nativeTag" and "nativeMode" attributes directly in <vlan>,
> as James did in the first version of the patch)?
> 
> 
>  To report this as spam, please forward to spam@xxxxxxxxxxxx.  Thank you.




 Protected by Websense Hosted Email Security -- www.websense.com 

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]