[PATCHv3] rpc: message related sizes enlarged

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Hansel <daniel.hansel@xxxxxxxxxxxxxxxxxx>

We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).

Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.

To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).

Signed-off-by: Daniel Hansel <daniel.hansel@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Viktor Mihajlovski <mihajlov@xxxxxxxxxxxxxxxxxx>
---
V2 Changes
 - switch to dynamical allocation of RPC message buffers
 - mention upstream version in libvirt.c

V3 Changes
 - update version comment in libvirt.c to 1.0.6

 src/libvirt.c                |    4 ++++
 src/remote/remote_protocol.x |    6 +++---
 src/rpc/virnetmessage.c      |   46 ++++++++++++++++++++++++++++++++++--------
 src/rpc/virnetmessage.h      |    3 ++-
 src/rpc/virnetprotocol.x     |   16 +++++++++++----
 tests/virnetmessagetest.c    |    2 +-
 6 files changed, 60 insertions(+), 17 deletions(-)

diff --git a/src/libvirt.c b/src/libvirt.c
index 467f6dd..33a4419 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -7786,6 +7786,8 @@ error:
  * For your program to be able to work reliably over a remote
  * connection you should split large requests to <= 65536 bytes.
  * However, with 0.9.13 this RPC limit has been raised to 1M byte.
+ * Starting with version 1.0.6 the RPC limit has been raised again.
+ * Now large requests up to 16M byte are supported.
  *
  * Returns: 0 in case of success or -1 in case of failure.
  */
@@ -7936,6 +7938,8 @@ error:
  * For your program to be able to work reliably over a remote
  * connection you should split large requests to <= 65536 bytes.
  * However, with 0.9.13 this RPC limit has been raised to 1M byte.
+ * Starting with version 1.0.6 the RPC limit has been raised again.
+ * Now large requests up to 16M byte are supported.
  *
  * Returns: 0 in case of success or -1 in case of failure.
  */
diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x
index 512ba2e..f61d10c 100644
--- a/src/remote/remote_protocol.x
+++ b/src/remote/remote_protocol.x
@@ -65,7 +65,7 @@
  * This is an arbitrary limit designed to stop the decoder from trying
  * to allocate unbounded amounts of memory when fed with a bad message.
  */
-const REMOTE_STRING_MAX = 1048576;
+const REMOTE_STRING_MAX = 4194304;
 
 /* A long string, which may NOT be NULL. */
 typedef string remote_nonnull_string<REMOTE_STRING_MAX>;
@@ -160,13 +160,13 @@ const REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX = 1024;
  * Note applications need to be aware of this limit and issue multiple
  * requests for large amounts of data.
  */
-const REMOTE_DOMAIN_BLOCK_PEEK_BUFFER_MAX = 1048576;
+const REMOTE_DOMAIN_BLOCK_PEEK_BUFFER_MAX = 4194304;
 
 /* Maximum length of a memory peek buffer message.
  * Note applications need to be aware of this limit and issue multiple
  * requests for large amounts of data.
  */
-const REMOTE_DOMAIN_MEMORY_PEEK_BUFFER_MAX = 1048576;
+const REMOTE_DOMAIN_MEMORY_PEEK_BUFFER_MAX = 4194304;
 
 /*
  * Maximum length of a security label list.
diff --git a/src/rpc/virnetmessage.c b/src/rpc/virnetmessage.c
index 647fef7..b2c6e5b 100644
--- a/src/rpc/virnetmessage.c
+++ b/src/rpc/virnetmessage.c
@@ -221,7 +221,7 @@ int virNetMessageEncodeHeader(virNetMessagePtr msg)
     int ret = -1;
     unsigned int len = 0;
 
-    msg->bufferLength = VIR_NET_MESSAGE_MAX + VIR_NET_MESSAGE_LEN_MAX;
+    msg->bufferLength = VIR_NET_MESSAGE_INITIAL + VIR_NET_MESSAGE_LEN_MAX;
     if (VIR_REALLOC_N(msg->buffer, msg->bufferLength) < 0) {
         virReportOOMError();
         return ret;
@@ -351,9 +351,27 @@ int virNetMessageEncodePayload(virNetMessagePtr msg,
     xdrmem_create(&xdr, msg->buffer + msg->bufferOffset,
                   msg->bufferLength - msg->bufferOffset, XDR_ENCODE);
 
-    if (!(*filter)(&xdr, data)) {
-        virReportError(VIR_ERR_RPC, "%s", _("Unable to encode message payload"));
-        goto error;
+    /* Try to encode the payload. If the buffer is too small increase it. */
+    while (!(*filter)(&xdr, data)) {
+        if ((msg->bufferLength - VIR_NET_MESSAGE_LEN_MAX) * 4 > VIR_NET_MESSAGE_MAX) {
+            virReportError(VIR_ERR_RPC, "%s", _("Unable to encode message payload"));
+            goto error;
+        }
+
+        xdr_destroy(&xdr);
+
+        msg->bufferLength = (msg->bufferLength - VIR_NET_MESSAGE_LEN_MAX) * 4 +
+            VIR_NET_MESSAGE_LEN_MAX;
+
+        if (VIR_REALLOC_N(msg->buffer, msg->bufferLength) < 0) {
+            virReportOOMError();
+            goto error;
+        }
+
+        xdrmem_create(&xdr, msg->buffer + msg->bufferOffset,
+                      msg->bufferLength - msg->bufferOffset, XDR_ENCODE);
+
+        VIR_DEBUG("Increased message buffer length = %zu", msg->bufferLength);
     }
 
     /* Get the length stored in buffer. */
@@ -415,11 +433,23 @@ int virNetMessageEncodePayloadRaw(virNetMessagePtr msg,
     XDR xdr;
     unsigned int msglen;
 
+    /* If the message buffer is too small for the payload increase it accordingly. */
     if ((msg->bufferLength - msg->bufferOffset) < len) {
-        virReportError(VIR_ERR_RPC,
-                    _("Stream data too long to send (%zu bytes needed, %zu bytes available)"),
-                    len, (msg->bufferLength - msg->bufferOffset));
-        return -1;
+        if ((msg->bufferOffset + len) > VIR_NET_MESSAGE_MAX) {
+            virReportError(VIR_ERR_RPC,
+                           _("Stream data too long to send (%zu bytes needed, %zu bytes available)"),
+                           len, (VIR_NET_MESSAGE_MAX - msg->bufferOffset));
+            return -1;
+        }
+
+        msg->bufferLength = msg->bufferOffset + len;
+
+        if (VIR_REALLOC_N(msg->buffer, msg->bufferLength) < 0) {
+            virReportOOMError();
+            return -1;
+        }
+
+        VIR_DEBUG("Increased message buffer length = %zu", msg->bufferLength);
     }
 
     memcpy(msg->buffer + msg->bufferOffset, data, len);
diff --git a/src/rpc/virnetmessage.h b/src/rpc/virnetmessage.h
index dfa1c6c..c94dddc 100644
--- a/src/rpc/virnetmessage.h
+++ b/src/rpc/virnetmessage.h
@@ -34,7 +34,8 @@ typedef void (*virNetMessageFreeCallback)(virNetMessagePtr msg, void *opaque);
 struct _virNetMessage {
     bool tracked;
 
-    char *buffer; /* Typically VIR_NET_MESSAGE_MAX + VIR_NET_MESSAGE_LEN_MAX */
+    char *buffer; /* Initially VIR_NET_MESSAGE_INITIAL + VIR_NET_MESSAGE_LEN_MAX */
+                  /* Maximum   VIR_NET_MESSAGE_MAX     + VIR_NET_MESSAGE_LEN_MAX */
     size_t bufferLength;
     size_t bufferOffset;
 
diff --git a/src/rpc/virnetprotocol.x b/src/rpc/virnetprotocol.x
index eb2e81d..131e40b 100644
--- a/src/rpc/virnetprotocol.x
+++ b/src/rpc/virnetprotocol.x
@@ -44,23 +44,31 @@
 
 /*----- Data types. -----*/
 
+/* Initial message size.
+ * When the message payload is larger this initial size will be
+ * quadrupled until the maximum total message size is reached.
+ */
+const VIR_NET_MESSAGE_INITIAL = 65536;
+
 /* Maximum total message size (serialised). */
-const VIR_NET_MESSAGE_MAX = 4194304;
+const VIR_NET_MESSAGE_MAX = 16777216;
 
 /* Size of struct virNetMessageHeader (serialised)*/
 const VIR_NET_MESSAGE_HEADER_MAX = 24;
 
 /* Size of message payload */
-const VIR_NET_MESSAGE_PAYLOAD_MAX = 4194280;
+const VIR_NET_MESSAGE_PAYLOAD_MAX = 16777192;
 
-/* Size of message length field. Not counted in VIR_NET_MESSAGE_MAX */
+/* Size of message length field. Not counted in VIR_NET_MESSAGE_MAX
+ * and VIR_NET_MESSAGE_INITIAL.
+ */
 const VIR_NET_MESSAGE_LEN_MAX = 4;
 
 /* Length of long, but not unbounded, strings.
  * This is an arbitrary limit designed to stop the decoder from trying
  * to allocate unbounded amounts of memory when fed with a bad message.
  */
-const VIR_NET_MESSAGE_STRING_MAX = 1048576;
+const VIR_NET_MESSAGE_STRING_MAX = 4194304;
 
 /* Limit on number of File Descriptors allowed to be
  * passed per message
diff --git a/tests/virnetmessagetest.c b/tests/virnetmessagetest.c
index 96defe4..fabeffd 100644
--- a/tests/virnetmessagetest.c
+++ b/tests/virnetmessagetest.c
@@ -46,7 +46,7 @@ static int testMessageHeaderEncode(const void *args ATTRIBUTE_UNUSED)
     };
     /* According to doc to virNetMessageEncodeHeader(&msg):
      * msg->buffer will be this long */
-    unsigned long msg_buf_size = VIR_NET_MESSAGE_MAX + VIR_NET_MESSAGE_LEN_MAX;
+    unsigned long msg_buf_size = VIR_NET_MESSAGE_INITIAL + VIR_NET_MESSAGE_LEN_MAX;
     int ret = -1;
 
     if (!msg) {
-- 
1.7.9.5

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]