hahha, you are right. my qemu-kvm is installed from yum.repo ,not compiled by me.
i always think qemu-kvm and qemu-system-x86_64 are not the same thing. actully they are the same thing.
i replace /usr/libexec/qemu-kvm with my qemu-system-x86_64,now it works.
i have a question.
what the difference between qemu.git and qemu-kvm.git?
any one is ok for kvm?
thanks.
At 2012-10-13 17:31:25,"Josh Durgin" <josh.durgin@xxxxxxxxxxx> wrote: >It sounds like the qemu binary that libvirt is using isn't one >compiled with rbd support. You can check by running: > >qemu-kvm -drive format=? > >rbd should appear in the list of supported formats. > >Josh > >On 10/13/2012 01:20 AM, yue wrote: >> i try your proposal. but there are no any output in qemu-rbd.log. selinux has been disabled(then reboot my OS). >> i do not know apparmor. my OS has no rpm of apparmor. >> my os is centps-6.2. 2.6.32-220.el6.x86_64. >> 1.would you give me the options of libvirt configure. i rebuild it. >> 2.if there a other way to confirm whether libvirt support rbd.other way to find root cause. >> >> thanks. >> >> ----rbd disk---- >> <disk type='network' device='disk'> >> <driver name='qemu' type='raw' cache='writethrough' io='native'/> >> <auth username='admin'> >> <secret type='ceph' uuid='7a91dc24-b072-43c4-98fb-4b2415322b0f'/> >> </auth> >> <source protocol='rbd' name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=20:debug_auth=20:log_file=/tmp/qemu-rbd.log'> >> <host name='192.168.10.4' port='6789'/> >> </source> >> <target dev='vda' bus='virtio'/> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> >> </disk> >> -------------------- >> >> >> >> >> >> At 2012-10-12 15:06:45,"Josh Durgin" <josh.durgin@xxxxxxxxxxx> wrote: >>> Sorry, I forgot libvirt/qemu eats stderr. The extra logging wasn't >>> captured. >>> >>> Could you try: >>> >>> name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=10:log_file=/tmp/qemu-rbd.log' >>> >>> If /tmp/qemu-rbd.log isn't full of debug messages, make sure selinux or >>> apparmor aren't preventing >>> qemu from writing to it. >>> >>> Josh >>> >>> On 2012-10-11 22:31, yue wrote: >>>> hi, i add debug options related to rbd in xpSP3.xml. but error seems >>>> same with privious. >>>> ----libvirtd.log------------------ >>>> erfaces >>>> 2012-10-12 13:25:28.267+0000: 9023: error : virNodeNumOfDevices:13984 >>>> : this function is not supported by the connection driver: >>>> virNodeNumOfDevices >>>> 2012-10-12 13:25:29.264+0000: 9025: error : >>>> virConnectNumOfInterfaces:11014 : this function is not supported by >>>> the connection driver: virConnectNumOfInterfaces >>>> 2012-10-12 13:25:29.266+0000: 9023: error : >>>> virConnectNumOfDefinedInterfaces:11098 : this function is not >>>> supported by the connection driver: virConnectNumOfDefinedInterfaces >>>> 2012-10-12 13:25:29.267+0000: 9022: error : virNodeNumOfDevices:13984 >>>> : this function is not supported by the connection driver: >>>> virNodeNumOfDevices >>>> 2012-10-12 13:25:30.264+0000: 9025: error : >>>> virConnectNumOfInterfaces:11014 : this f unction is not supported by >>>> the connection driver: virConnectNumOfInterfaces >>>> 2012-10-12 13:25:30.267+0000: 9023: error : >>>> virConnectNumOfDefinedInterfaces:11098 : this function is not >>>> supported by the connection driver: virConnectNumOfDefinedInterfaces >>>> 2012-10-12 13:25:30.269+0000: 9022: error : virNodeNumOfDevices:13984 >>>> : this function is not supported by the connection driver: >>>> virNodeNumOfDevices >>>> 2012-10-12 13:25:30.523+0000: 9021: warning : qemuDomainObjTaint:1364 >>>> : Domain id=1 name='xpSP3' uuid=b45bd66a-6700-4905-c5f4-4c799413d7b7 >>>> is tainted: high-privileges >>>> 2012-10-12 13:25:30.943+0000: 9021: error : qemuMonitorOpenUnix:293 : >>>> failed to connect to monitor socket: No such process >>>> 2012-10-12 13:25:30.943+0000: 9021: info : qemuConnectMonitor:1247 : >>>> Failed to connect monitor for xpSP3 >>>> 2012-10-12 13:25:30.943+0000: 9021: error : >>>> qemuProcessWaitForMonitor:1634 : internal error process exited while >>>> connecting to monitor: char device redirected to /dev/pts/4 >>>> qemu-kvm: -drive >>>> >>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native: >>>> could not open disk image >>>> >>>> rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789: >>>> No such file or directory >>>> >>>> ---------xpSP3.log---is attached.--- >>>> 2012-10-12 13:11:33.133+0000: starting up >>>> LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/root USER=root >>>> LOGNAME=root QEMU_AUDIO_DRV=none /usr/libexec/qemu-kvm -name xpSP3 -S >>>> -M rhel6.2.0 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 >>>> -uuid b45bd66a-6700-4905-c5f4-4c799413d7b7 -nodefconfig -nodefaults >>>> -chardev socket,id=charmonitor,path=/var/lib/libvirt/ >>>> qemu/xpSP3.monitor,server,nowait -mon >>>> chardev=charmonitor,id=monitor,mode=readline -rtc >>>> base=localtime,driftfix=slew -device >>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive >>>> >>>> file=/var/lib/libvirt/images/xpSP3.img,if=none,id=drive-ide0-0-0,format=raw,cache=none >>>> -device >>>> >>>> ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 >>>> -drive >>>> >>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native >>>> -device >>>> >>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0 >>>> -netdev tap,fd=19,id=hostnet0 -device >>>> >>>> e1000,netdev=hostnet0,id=net0,mac=52:54:00:2a:8c:48,bus=pci.0,addr=0x3 >>>> -chardev pty,id=charserial0 -device >>>> isa-serial,chardev=charserial0,id=serial0 -device >>>> usb-tablet,id=input0 >>>> -vnc 0.0.0.0:0 -vga std -device >>>> intel-hda,id=sound0,bus=pci.0,addr=0x4 >>>> -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device >>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 >>>> Domain id=1 is tainted: high-privileges >>>> 2012-10-12 13:11:33.144+0000: 7815: debug : virFileClose:72 : Closed >>>> fd 18 >>>> 2012-10-12 13:11:33.145+0000: 7815: debug : virFileClose:72 : Closed >>>> fd 24 >>>> 2012-10-12 13:11:33.145+0000: 7815: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virCommandHook:2058 : Run >>>> hook 0x7faa10a62030 0x7faa160d4370 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : qemuProcessHook:2589 : >>>> Obtaining domain lock >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virDomainLockProcessStart:164 : plugin=0x7faa080020a0 >>>> dom=0x7faa0804af40 paused=1 fd=0x7faa160d3998 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virDomainLockManagerNew:123 : plugin=0x7faa080020a0 >>>> dom=0x7faa0804af40 >>>> withResources=1 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virLockManagerPluginGetDriver:280 : plugin=0x7faa080020a0 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerNew:304 : >>>> driver=0x3712e9cb20 type=0 nparams=4 params=0x7faa160d3830 flags=0 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virLockManagerLogParams:104 : key=uuid type=uuid >>>> value=b45bd66a-6700-4905-c5f4-4c799413d7b7 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virLockManagerLogParams:100 : key=name type=string value=xpSP3 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virLockManagerLogParams:88 : key=id type=uint value=1 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virLockManagerLogParams:88 : key=pid type=uint value=7818 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virDomainLockManagerNew:135 : Adding leases >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virDomainLockManagerNew:140 : Adding disks >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : >>>> virDomainLockManagerAddDisk:86 : Add disk >>>> /var/lib/libvirt/images/xpSP3.img >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockMan >>>> agerAddResource:333 : lock=0x7faa08060820 type=0 >>>> name=/var/lib/libvirt/images/xpSP3.img nparams=0 params=(nil) flags=0 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerAcquire:350 >>>> : lock=0x7faa08060820 state='(null)' flags=3 fd=0x7faa160d3998 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerFree:387 : >>>> lock=0x7faa08060820 >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : qemuProcessHook:2614 : >>>> Moving process to cgroup >>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virCgroupNew:617 : New >>>> group /libvirt/qemu/xpSP3 >>>> 2012-10-12 13:11:33.151+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 0:cpu at /cgroup/cpu in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 1:cpuacct at /cgroup/cpuacct in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 2:cpuset at /cgroup/cpuset in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/ma pping 3:memory at /cgroup/memory in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 4:devices at /cgroup/devices in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 5:freezer at /cgroup/freezer in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 : >>>> Detected mount/mapping 6:blkio at /cgroup/blkio in >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:535 : >>>> Make group /libvirt/qemu/xpSP3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/cpu/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/cpuacct/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/cpuset/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/memory/libvirt/ qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/devices/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/freezer/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 : >>>> Make controller /cgroup/blkio/libvirt/qemu/xpSP3/ >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/cpu/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/cpuacct/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/cpuset/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/memory/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/devices/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/freezer/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331 >>>> : Set value '/cgroup/blkio/libvirt/qemu/xpSP3/tasks' to '7818' >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 3 >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : >>>> qemuProcessInitCpuAffinity:1848 : Setting CPU affinity >>>> 2 012-10-12 13:11:33.156+0000: 7818: debug : >>>> qemuProcessInitCpuAffinity:1883 : Set CPU affinity with specified >>>> cpuset >>>> 2012-10-12 13:11:33.156+0000: 7818: debug : qemuProcessHook:2626 : >>>> Setting up security labelling >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virGetUserIDByName:2539 : >>>> User record for user '0' does not exist >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virGetGroupIDByName:2621 >>>> : Group record for group '0' does not exist >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : >>>> virSecurityDACSetProcessLabel:861 : Dropping privileges of DEF to 0:0 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : qemuProcessHook:2633 : >>>> Hook complete ret=0 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2060 : >>>> Done hook 0 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2074 : >>>> Notifying parent for handshake start on 21 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2098 : >>>> Waiting on parent for handshake complete on 22 >>>> 2012-10-12 13:11:33.157+0 000: 7818: debug : virFileClose:72 : Closed >>>> fd 21 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virFileClose:72 : Closed >>>> fd 22 >>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2119 : >>>> Hook is done 0 >>>> char device redirected to /dev/pts/4 >>>> qemu-kvm: -drive >>>> >>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native: >>>> could not open disk image >>>> >>>> rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789: >>>> No such file or directory >>>> 2012-10-12 13:11:33.557+0000: shutting down >>>> >>>> ---- >>>> >>>> At 2012-10-12 00:04:19,"Josh Durgi >>>> n" <josh.durgin@xxxxxxxxxxx> wrote: >>>>> On 10/11/2012 12:00 AM, yue wrote: >>>>>> how should i do? i configurate guest-os.xml ,add rbd disk manually. >>>>>> then virsh start xpSP3 >>>>> >>>>> That's the right way to do it. >>>>> >>>>>> -------rbd disk------------ >>>>>> <disk type='network' device='disk'> >>>>>> <driver name='qemu' type='raw' cache='writethrough' io='native'/> >>>>>> <auth username='cloud'> >>>>>> <secret type='ceph' uuid='7a91dc24-b072-43c4-98fb-4b2415322b0f'/> >>>>>> </auth> >>>>>> <source protocol='rbd' name='cloud/testrbd'> >>>>>> <host name='192.168.10.4' port='6789'/> >>>>>> </source> >>>>>> <target dev='vdb' bus='virtio'/> >>>>>> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' >>>>>> function='0x0'/> >>>>>> </disk> >>>>>> ---error log--- >>>>>> >>>>>> [root@KVM-ip11 git]# virsh start xpSP3 >>>>>> error: Failed to start domain xpSP3 >>>>>> error: internal error process exited while connecting to monitor: >>>>>> char device redirected to /dev/pts/4 >>>>>> qemu-kvm: -drive >>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk1,format=raw,cache=writethrough,aio=native: >>>>>> could not open disk image >>>>>> rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789: >>>>>> No such file or directory >>>>>> ---xpSP3.log----- >>>>>> 2012-10-11 14:57:58.118+0000: starting up >>>>>> LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/root USER=root >>>>>> LOGNAME=root QEMU_AUDIO_DRV=none /usr/libexec/qemu-kvm -name xpSP3 -S >>>>>> -M rhel6.2.0 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 >>>>>> -uuid b45bd66a-6700-4905-c5f4-4c799413d7b7 -nodefconfig -nodefaults >>>>>> -chardev >>>>>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/xpSP3.monitor,server,nowait >>>>>> -mon chardev=charmonitor,id=monitor,mode=readline -rtc >>>>>> base=localtime,driftfix=slew -device >>>>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive >>>>>> file=/var/lib/libvirt/images/xpSP3.img,if=none,id=drive-ide0-0-0,format=raw,cache=none >>>>>> -device >>>>>> ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 >>>>>> -drive >>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789, >>>> if=none,id=drive-virtio-disk1,format=raw -device >>>> >>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1 >>>> -netdev tap,fd=19,id=hostnet0 -device e1000,netdev! >>>>>> =hostnet0,id=net0,mac=52:54:00:2a:8c:48,bus=pci.0,addr=0x3 -chardev >>>>>> pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 >>>>>> -device usb-tablet,id=input0 -vnc 0.0.0.0:0 -vga std -device >>>>>> intel-hda,id=sound0,bus=pci.0,addr=0x4 -device >>>>>> hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device >>>>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 >>>>>> Domain id=3 is tainted: high-privileges >>>>>> char device redirected to /dev/pts/4 >>>>>> qemu-kvm: -drive >>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk1,format=raw: >>>>>> could not open disk image >>>>>> rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789: >>>>>> No such file or directory >>>>>> 2012-10-11 14:57:58.548+0000: shutting down >>>>> >>>>> It's unclear where the actual problem is - could you try again with >>>>> name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=10:log_to_stderr=true' >>>>> and post the instance log (i.e. xpSP3.log)? >>>>> >>>>> Josh >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> At 2012-10-11 14:48:43,"Josh Durgin" <josh.durgin@xxxxxxxxxxx> >>>>>> wrote: >>>>>>> On 10/10/2012 10:52 PM, yue wrote: >>>>>>>> hi, now i rebuild libvirtd, version 0.10.2. and define ceph >>>>>>>> secret >>>>>>>> ,define ceph storage-pool. all fine up to now. >>>>>>>> i operate guest-os through virt-manager-GUI . i add a >>>>>>>> rbd-file(qemu-img create before) from ceph-rbd-pool, click >>>>>>>> 'finish',it >>>>>>>> pop error "NoneType object has no attribute startswith", someone >>>>>>>> say it >>>>>>>> is python error. >>>>>>> >>>>>>> python-virtinst (and thus virt-manager) don't support the rbd >>>>>>> storage >>>>>>> pool. They don't know how to configure rbd disks yet either. >>>>>>> >>>>>>> Josh >>>>> >>>>> >> >
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list