We need a way to update the elements of a <network> without being
required to restart the network before the changes take effect. I had
previously thought I could just use a new virNetworkDefineXMLFlags with
an optional flag set to mean "take effect immediately", but have been
discouraged from that approach.
Instead, I'm considering something similar to
virDomain(Attach|Update|Detach)DeviceFlags, but this could be more
complicated because I would like to be able to update *anything* within
the network definition hierarchy, not just the direct subelements of one
level in the hierarchy (as is the case for those existing functions).
Here's an example of an existing network (note that this isn't a legal
network - you can't have an <ip> element and an interface pool (or a
bridge name and an interface pool) in the same network; this is just so
I can use a single example), and some of the things we might want to do
with it:
<network>
<name>test1</name>
<uuid>2d39a0ba-ac4b-6097-114c-50f8bccc277c</uuid>
<forward mode='bridge'/>
<bridge name='virbr5' stp='on' delay='0' />
<mac address='52:54:00:38:81:4D'/>
<domain name='example.com'/>
<forward mode='private'/>
<interface dev="eth20"/>
<interface dev="eth21"/>
<interface dev="eth22"/>
<interface dev="eth23"/>
<interface dev="eth24"/>
</forward>
<portgroup name='engineering' default='yes'>
<virtualport type='802.1Qbh'>
<parameters profileid='test'/>
</virtualport>
<bandwidth>
<inbound average='1000' peak='5000' burst='5120'/>
<outbound average='1000' peak='5000' burst='5120'/>
</bandwidth>
</portgroup></b>
<portgroup name='sales'>
<virtualport type='802.1Qbh'>
<parameters profileid='salestest'/>
</virtualport>
<bandwidth>
<inbound average='500' peak='2000' burst='2560'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
</portgroup></b>
<dns>
<txt name="example" value="example value" />
<srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10'/>
<host ip='192.168.122.2'>
<hostname>myhost</hostname>
<hostname>myhostalias</hostname>
</host>
</dns>
<ip address='10.24.75.1' netmask='255.255.255.0'>
<dhcp>
<range start='10.24.75.128' end='10.24.75.254' />
<host mac='52:54:3e:77:e2:ed' name='X.example.com' ip='10.24.75.10' />
<host mac='52:54:3e:77:e2:ef' name='Y.example.com' ip='10.24.75.11' />
<host mac='52:54:34:77:e2:f0' name='Z.example.com' ip='10.24.75.12' />
<host mac='52:54:3e:77:e2:f1' name='A.example.com' ip='10.24.75.13' />
</dhcp>
</ip>
<ip address='192.168.4.1' netmask='255.255.255.0'/>
</network>
Some things we might want to do to this (the first three have already
been requested):
1) add or remove an interface from the interface pool, i.e. a particular
<interface> sub-element of the (one and only) <forward> element.
2) add/remove/modify a portgroup entry (i.e. a specific sub-element of
<network>)
3) add/remove/modify a static host entry from the <dhcp> section of a
particular <ip> (so, a particular <host> sub-element of a particular
<ip> element)
Some others:
4) add/modify/remove a <host> (or a <txt> or an <srv> in the <dns> section
4) add/modify/remove the <domain>
5) add/modify/remove an entire <ip> element
6) turn stp on/off in the <bridge> element
I can see three possible methods of providing this functionality:
===========
OPTION 1) Have a single API:
virNetworkUpdate(virNetworkPtr network,
const char *xml, unsigned, int flags)
This function would take an entire <network> specification as an arg,
and replace the entire existing config. This would allow changing
anything, but would also require reading the entire config beforehand.
===========
OPTION 2) have a separate API for each different type of element we may want to
change, e.g.:
virNetworkUpdateForwardInterface(virNetworkPtr network,
const char *xml,
unsigned int flags);
virNetworkUpdatePortgroup(virNetworkPtr network,
const char *xml,
unsigned int flags);
virNetworkUpdateIpDhcpHost(virNetworkPtr network,
const char *xml,
unsigned int flags);
virNetworkUpdateDnsEntry(virNetworkPtr network,
const char *xml,
unsigned int flags);
/* The name of this one may confuse... */
virNetworkUpdateDomain(virNetworkPtr network,
const char *xml,
unsigned int flags);
virNetworkUpdateBridge(virNetworkPtr network,
const char *xml,
unsigned int flags);
virNetworkUpdateIpDnsHost(virNetworkPtr network,
const char *xml,
unsigned int flags);
etc. (etc. etc.)
"flags" would include:
/* force add if object with matching key doesn't exist */
VIR_NETWORK_UPDATE_ADD
/* delete existing object(s) that matches the xml */
VIR_NETWORK_UPDATE_DELETE
/* take effect immediately */
VIR_NETWORK_UPDATE_LIVE
/* persistent change */
VIR_NETWORK_UPDATE_CONFIG
This method could be problematic, e.g., for something like
virNetworkUpdateIpDhcpHost() - although currently only a single <ip>
element can have a <dhcp> entries, in the future we could allow any/all
of them to have dhcp entries. Another downside is that we would need to
add an new function for each new element we decide we want to be able to
update.
===========
OPTION 3) Again, a single API, but with an added "nodespec" arg which would
be used to describe the parent node you of the node you want added/updated to:
int virNetworkUpdate(virNetworkPtr network,
const char *nodeSpec,
const char *xml,
unsigned int flags);
For example, if you wanted to add a new <host> entry to <ip
address='10.24.75.1' ...>'s dhcp element, you would do this:
/* nodespec obviously uses an XPath expression */
virNetworkUpdate("/ip[address='10.24.75.1']/dhcp",
/* full text of <host> element to add */
"<host mac='00:16:3e:77:e2:ed' "
"name='X.example.com' ip='10.24.75.10'/>"
VIR_NETWORK_UPDATE_ADD | VIR_NETWORK_UPDATE_LIVE
| VIR_NETWORK_UPDATE_CONFIG);
Or, to change the contents of the exiting portgroup "engineering" you
would use:
virNetworkUpdate("/",
/* full text of portgroup */,
"<portgroup name='engineering'> ..... </portgroup>"
VIR_NETWORK_UPDATE_LIVE|VIR_NETWORK_UPDATE_CONFIG);
To delete a static dhcp host entry, you would use this:
virNetworkUpdate("/ip[address='10.24.75.1']/dhcp",
/* just enough to match existing entry */
"<host mac='00:16:3e:77:e2:ed'/>",
VIR_NETWORK_UPDATE_DELETE | VIR_NETWORK_UPDATE_LIVE
| VIR_NETWORK_UPDATE_CONFIG);
or if you preferred:
virNetworkUpdate("/ip[address='10.24.75.1']/dhcp",
/* again, just enough to match */
"<host ip='10.24.75.10'/>",
VIR_NETWORK_UPDATE_DELETE |VIR_NETWORK_UPDATE_LIVE
| VIR_NETWORK_UPDATE_CONFIG);
To remove an interface from the interface pool:
virNetworkUpdate("/forward",
"<interface dev='eth20'/>",
VIR_NETWORK_UPDATE_DELETE | VIR_NETWORK_UPDATE_LIVE
| VIR_NETWORK_UPDATE_CONFIG)
(adding an interface would be identical, except the flag).
(An alternate implementation would be to have nodeSpec specify the node
that is being updated/removed rather than its parent. This may make more
logical sense, (although not for ADD) and would even make the rest of
the code simpler for update/remove (we wouldn't have to do a manual
search within the node).
The positive side of this is that the one API function allows you to modify
*anything* (even stuff not yet invented, so it's future-proof). The negative
side is that the code that implements it would need to go to quite a bit of
extra trouble to determine what has been changed (basically, it would
a) generate XML for the current state of the network,
b) parse that into an xmlNode,
c) perform the operation on xmlNode using nodeset to figure out where,
and adding in the new xml (or removing any nodes matching it),
d) convert modified xmlNode back to xml text,
e) parse the xml text into a virNetworkDef,
f) compare it to the original virNetworkDef to determine what to do.
==========
Which OPTION? 1, 2, or 3?
=========================
I'm discounting option (1) for now. Here's the scorecard for (2) vs. (3):
2) Pros: easier to understand, more exactly defined.
Cons: requires a new API each time we find a different node we want
to be able to update
3) Pros: one API covers everything, should never need any new API
Cons: more complex for user to understand, me to implement. Possibly
more trouble to do fine grained access control (e.g. if you want
to allow adding dhcp static hosts, but not allow changing the
domain name or interface pool)
(actually, in practice, I guess it shouldn't be any more trouble to do
fine grained access control, as long as you can make the decision of
whether or not to allow later on in the function that implements the API
(at step (6) above), rather than at the top level when the API is first
called).
I'm leaning towards (3). If it raises a technical boundary, or people
don't like the idea of having an arg in the public API that takes an
XPath expression, then maybe I could switch to (2).
Any opinions on which direction I should take? Some way different from
what I'm suggesting?
Specific questions:
1) Does having a single public API that is used to update many different
parts of the object raise any hurdles wrt. fine grained access control?
(knowing that there will be "some point" in that code that we know
exactly what the user is attempting to change).
2) any problems / reservations about accepting XPatch expressions in the
args of a public API?
3) Can you think of a situation where this wouldn't work?
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list