Once qemu monitor reports migration has completed, we just closed our
end of the pipe and let migration tunnel die. This generated bogus error
in case we did so before the thread saw EOF on the pipe and migration
was aborted even though it was in fact successful.
With this patch we first wake up the tunnel thread and once it has read
all data from the pipe and finished the stream we close the
filedescriptor.
A small additional bonus of this patch is that real errors reported
inside qemuMigrationIOFunc are not overwritten by virStreamAbort any
more.
---
src/qemu/qemu_migration.c | 148 ++++++++++++++++++++++++++++++++++++---------
1 files changed, 120 insertions(+), 28 deletions(-)
diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index 43e56b7..3a420be 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -25,6 +25,7 @@
#include <gnutls/gnutls.h>
#include <gnutls/x509.h>
#include <fcntl.h>
+#include <poll.h>
#include "qemu_migration.h"
#include "qemu_monitor.h"
@@ -1585,49 +1586,113 @@ struct _qemuMigrationIOThread {
virStreamPtr st;
int sock;
virError err;
+ int wakeupRecvFD;
+ int wakeupSendFD;
};
static void qemuMigrationIOFunc(void *arg)
{
qemuMigrationIOThreadPtr data = arg;
- char *buffer;
- int nbytes = TUNNEL_SEND_BUF_SIZE;
+ char *buffer = NULL;
+ struct pollfd fds[2];
+ int timeout = -1;
+ virErrorPtr err = NULL;
+
+ VIR_DEBUG("Running migration tunnel; stream=%p, sock=%d",
+ data->st, data->sock);
if (VIR_ALLOC_N(buffer, TUNNEL_SEND_BUF_SIZE) < 0) {
virReportOOMError();
- virStreamAbort(data->st);
- goto error;
+ goto abrt;
}
+ fds[0].fd = data->sock;
+ fds[1].fd = data->wakeupRecvFD;
+
for (;;) {
- nbytes = saferead(data->sock, buffer, TUNNEL_SEND_BUF_SIZE);
- if (nbytes < 0) {
+ int ret;
+
+ fds[0].events = fds[1].events = POLLIN;
+ fds[0].revents = fds[1].revents = 0;
+
+ ret = poll(fds, ARRAY_CARDINALITY(fds), timeout);
+
+ if (ret < 0) {
+ if (errno == EAGAIN || errno == EINTR)
+ continue;
virReportSystemError(errno, "%s",
- _("tunnelled migration failed to read from qemu"));
- virStreamAbort(data->st);
- VIR_FREE(buffer);
- goto error;
+ _("poll failed in migration tunnel"));
+ goto abrt;
}
- else if (nbytes == 0)
- /* EOF; get out of here */
+
+ if (ret == 0) {
+ /* We were asked to gracefully stop but reading would block. This
+ * can only happen if qemu told us migration finished but didn't
+ * close the migration fd. We handle this in the same way as EOF.
+ */
+ VIR_DEBUG("QEMU forgot to close migration fd");
break;
+ }
- if (virStreamSend(data->st, buffer, nbytes) < 0) {
- VIR_FREE(buffer);
- goto error;
+ if (fds[1].revents & (POLLIN | POLLERR | POLLHUP)) {
+ char stop = 0;
+
+ if (saferead(data->wakeupRecvFD, &stop, 1) != 1) {
+ virReportSystemError(errno, "%s",
+ _("failed to read from wakeup fd"));
+ goto abrt;
+ }
+
+ VIR_DEBUG("Migration tunnel was asked to %s",
+ stop ? "abort" : "finish");
+ if (stop) {
+ goto abrt;
+ } else {
+ timeout = 0;
+ }
}
- }
- VIR_FREE(buffer);
+ if (fds[0].revents & (POLLIN | POLLERR | POLLHUP)) {
+ int nbytes;
+
+ nbytes = saferead(data->sock, buffer, TUNNEL_SEND_BUF_SIZE);
+ if (nbytes > 0) {
+ if (virStreamSend(data->st, buffer, nbytes) < 0)
+ goto error;
+ } else if (nbytes < 0) {
+ virReportSystemError(errno, "%s",
+ _("tunnelled migration failed to read from qemu"));
+ goto abrt;
+ } else {
+ /* EOF; get out of here */
+ break;
+ }
+ }
+ }
if (virStreamFinish(data->st) < 0)
goto error;
+ VIR_FREE(buffer);
+
return;
+abrt:
+ err = virSaveLastError();
+ if (err && err->code == VIR_ERR_OK) {
+ virFreeError(err);
+ err = NULL;
+ }
+ virStreamAbort(data->st);
+ if (err) {
+ virSetError(err);
+ virFreeError(err);
+ }
+
error:
virCopyLastError(&data->err);
virResetLastError();
+ VIR_FREE(buffer);
}
@@ -1635,37 +1700,63 @@ static qemuMigrationIOThreadPtr
qemuMigrationStartTunnel(virStreamPtr st,
int sock)
{
- qemuMigrationIOThreadPtr io;
+ qemuMigrationIOThreadPtr io = NULL;
+ int wakeupFD[2] = { -1, -1 };
- if (VIR_ALLOC(io) < 0) {
- virReportOOMError();
- return NULL;
+ if (pipe2(wakeupFD, O_CLOEXEC) < 0) {
+ virReportSystemError(errno, "%s",
+ _("Unable to make pipe"));
+ goto error;
}
+ if (VIR_ALLOC(io) < 0)
+ goto no_memory;
+
io->st = st;
io->sock = sock;
+ io->wakeupRecvFD = wakeupFD[0];
+ io->wakeupSendFD = wakeupFD[1];
if (virThreadCreate(&io->thread, true,
qemuMigrationIOFunc,
io) < 0) {
virReportSystemError(errno, "%s",
_("Unable to create migration thread"));
- VIR_FREE(io);
- return NULL;
+ goto error;
}
return io;
+
+no_memory:
+ virReportOOMError();
+error:
+ VIR_FORCE_CLOSE(wakeupFD[0]);
+ VIR_FORCE_CLOSE(wakeupFD[1]);
+ VIR_FREE(io);
+ return NULL;
}
static int
-qemuMigrationStopTunnel(qemuMigrationIOThreadPtr io)
+qemuMigrationStopTunnel(qemuMigrationIOThreadPtr io, bool error)
{
int rv = -1;
+ char stop = error ? 1 : 0;
+
+ /* make sure the thread finishes its job and is joinable */
+ if (safewrite(io->wakeupSendFD, &stop, 1) != 1) {
+ virReportSystemError(errno, "%s",
+ _("failed to wakeup migration tunnel"));
+ goto cleanup;
+ }
+
virThreadJoin(&io->thread);
/* Forward error from the IO thread, to this thread */
if (io->err.code != VIR_ERR_OK) {
- virSetError(&io->err);
+ if (error)
+ rv = 0;
+ else
+ virSetError(&io->err);
virResetError(&io->err);
goto cleanup;
}
@@ -1673,6 +1764,8 @@ qemuMigrationStopTunnel(qemuMigrationIOThreadPtr io)
rv = 0;
cleanup:
+ VIR_FORCE_CLOSE(io->wakeupSendFD);
+ VIR_FORCE_CLOSE(io->wakeupRecvFD);
VIR_FREE(io);
return rv;
}
@@ -1880,10 +1973,9 @@ cleanup:
orig_err = virSaveLastError();
if (spec->fwdType != MIGRATION_FWD_DIRECT) {
- /* Close now to ensure the IO thread quits & is joinable */
- VIR_FORCE_CLOSE(fd);
- if (iothread && qemuMigrationStopTunnel(iothread) < 0)
+ if (iothread && qemuMigrationStopTunnel(iothread, ret < 0) < 0)
ret = -1;
+ VIR_FORCE_CLOSE(fd);
}
if (ret == 0 &&
--
1.7.8.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list