From: Hu Tao <hutao@xxxxxxxxxxxxxx>
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@xxxxxxxxxxxxxx>
Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>
---
docs/formatdomain.html.in | 29 +++++-
docs/schemas/domaincommon.rng | 26 ++++-
include/libvirt/libvirt.h.in | 10 ++
src/conf/domain_conf.c | 99 +++++++++++++++++++-
src/conf/domain_conf.h | 14 +++
src/libvirt_private.syms | 1 +
.../qemuxml2argv-blkiotune-device.xml | 36 +++++++
tools/virsh.c | 43 +++++++--
tools/virsh.pod | 8 ++-
9 files changed, 245 insertions(+), 21 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-blkiotune-device.xml
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index cbad196..99c5add 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -505,6 +505,14 @@
...
<blkiotune>
<weight>800</weight>
+ <device>
+ <path>/dev/sda</path>
+ <weight>1000</weight>
+ </device>
+ <device>
+ <path>/dev/sdb</path>
+ <weight>500</weight>
+ </device>
</blkiotune>
...
</domain>
@@ -514,10 +522,25 @@
<dt><code>blkiotune</code></dt>
<dd> The optional <code>blkiotune</code> element provides the ability
to tune Blkio cgroup tunable parameters for the domain. If this is
- omitted, it defaults to the OS provided defaults.</dd>
+ omitted, it defaults to the OS provided
+ defaults. <span class="since">Since 0.8.8</span></dd>
<dt><code>weight</code></dt>
- <dd> The optional <code>weight</code> element is the I/O weight of the
- guest. The value should be in range [100, 1000].</dd>
+ <dd> The optional <code>weight</code> element is the overall I/O
+ weight of the guest. The value should be in the range [100,
+ 1000].</dd>
+ <dt><code>device</code></dt>
+ <dd>The domain may have multiple <code>device</code> elements
+ that further tune the weights for each host block device in
+ use by the domain. Note that
+ multiple <a href="#elementsDisks">guest disks</a> can share a
+ single host block device, if they are backed by files within
+ the same host file system, which is why this tuning parameter
+ is at the global domain level rather than associated with each
+ guest disk device. Each <code>device</code> element has two
+ mandatory sub-elements, <code>path</code> describing the
+ absolute path of the device, and <code>weight</code> giving
+ the relative weight of that device, in the range [100,
+ 1000]. <span class="since">Since 0.9.8</span></dd>
</dl>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index b6f858e..f776a51 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -322,12 +322,26 @@
<!-- The Blkio cgroup related tunables would go in the blkiotune -->
<optional>
<element name="blkiotune">
- <!-- I/O weight the VM can use -->
- <optional>
- <element name="weight">
- <ref name="weight"/>
- </element>
- </optional>
+ <interleave>
+ <!-- I/O weight the VM can use -->
+ <optional>
+ <element name="weight">
+ <ref name="weight"/>
+ </element>
+ </optional>
+ <zeroOrMore>
+ <element name="device">
+ <interleave>
+ <element name="path">
+ <ref name="absFilePath"/>
+ </element>
+ <element name="weight">
+ <ref name="weight"/>
+ </element>
+ </interleave>
+ </element>
+ </zeroOrMore>
+ </interleave>
</element>
</optional>
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
index 2ab89f5..ff4f51b 100644
--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
@@ -1236,6 +1236,16 @@ char * virDomainGetSchedulerType(virDomainPtr domain,
#define VIR_DOMAIN_BLKIO_WEIGHT "weight"
+/**
+ * VIR_DOMAIN_BLKIO_DEVICE_WEIGHT:
+ *
+ * Macro for the blkio tunable weight_device: it represents the
+ * per-device weight, as a string. The string is parsed as a
+ * series of /path/to/device,weight elements, separated by ','.
+ */
+
+#define VIR_DOMAIN_BLKIO_DEVICE_WEIGHT "device_weight"
+
/* Set Blkio tunables for the domain*/
int virDomainSetBlkioParameters(virDomainPtr domain,
virTypedParameterPtr params,
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 58f4d0f..b35c83c 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -603,6 +603,67 @@ VIR_ENUM_IMPL(virDomainStartupPolicy, VIR_DOMAIN_STARTUP_POLICY_LAST,
#define VIR_DOMAIN_XML_WRITE_FLAGS VIR_DOMAIN_XML_SECURE
#define VIR_DOMAIN_XML_READ_FLAGS VIR_DOMAIN_XML_INACTIVE
+
+void
+virBlkioDeviceWeightArrayClear(virBlkioDeviceWeightPtr deviceWeights,
+ int ndevices)
+{
+ int i;
+
+ for (i = 0; i < ndevices; i++)
+ VIR_FREE(deviceWeights[i].path);
+}
+
+/**
+ * virDomainBlkioDeviceWeightParseXML
+ *
+ * this function parses a XML node:
+ *
+ * <device>
+ * <path>/fully/qualified/device/path</path>
+ * <weight>weight</weight>
+ * </device>
+ *
+ * and fills a virBlkioDeviceWeight struct.
+ */
+static int
+virDomainBlkioDeviceWeightParseXML(xmlNodePtr root,
+ virBlkioDeviceWeightPtr dw)
+{
+ char *c;
+ xmlNodePtr node;
+
+ node = root->children;
+ while (node) {
+ if (node->type == XML_ELEMENT_NODE) {
+ if (xmlStrEqual(node->name, BAD_CAST "path") && !dw->path) {
+ dw->path = (char *)xmlNodeGetContent(node);
+ } else if (xmlStrEqual(node->name, BAD_CAST "weight")) {
+ c = (char *)xmlNodeGetContent(node);
+ if (virStrToLong_ui(c, NULL, 10, &dw->weight) < 0) {
+ virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("could not parse weight %s"),
+ c);
+ VIR_FREE(c);
+ VIR_FREE(dw->path);
+ return -1;
+ }
+ VIR_FREE(c);
+ }
+ }
+ node = node->next;
+ }
+ if (!dw->path) {
+ virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("missing per-device path"));
+ return -1;
+ }
+
+ return 0;
+}
+
+
+
static void
virDomainObjListDataFree(void *payload, const void *name ATTRIBUTE_UNUSED)
{
@@ -1272,6 +1333,10 @@ void virDomainDefFree(virDomainDefPtr def)
VIR_FREE(def->emulator);
VIR_FREE(def->description);
+ virBlkioDeviceWeightArrayClear(def->blkio.devices,
+ def->blkio.ndevices);
+ VIR_FREE(def->blkio.devices);
+
virDomainWatchdogDefFree(def->watchdog);
virDomainMemballoonDefFree(def->memballoon);
@@ -6711,6 +6776,22 @@ static virDomainDefPtr virDomainDefParseXML(virCapsPtr caps,
&def->blkio.weight) < 0)
def->blkio.weight = 0;
+ if ((n = virXPathNodeSet("./blkiotune/device", ctxt, &nodes)) < 0) {
+ virDomainReportError(VIR_ERR_INTERNAL_ERROR,
+ "%s", _("cannot extract blkiotune nodes"));
+ goto error;
+ }
+ if (n && VIR_ALLOC_N(def->blkio.devices, n) < 0)
+ goto no_memory;
+
+ for (i = 0; i < n; i++) {
+ if (virDomainBlkioDeviceWeightParseXML(nodes[i],
+ &def->blkio.devices[i]) < 0)
+ goto error;
+ def->blkio.ndevices++;
+ }
+ VIR_FREE(nodes);
+
/* Extract other memory tunables */
if (virXPathULong("string(./memtune/hard_limit)", ctxt,
&def->mem.hard_limit) < 0)
@@ -10849,10 +10930,22 @@ virDomainDefFormatInternal(virDomainDefPtr def,
def->mem.cur_balloon);
/* add blkiotune only if there are any */
- if (def->blkio.weight) {
+ if (def->blkio.weight || def->blkio.devices) {
virBufferAddLit(buf, " <blkiotune>\n");
- virBufferAsprintf(buf, " <weight>%u</weight>\n",
- def->blkio.weight);
+
+ if (def->blkio.weight)
+ virBufferAsprintf(buf, " <weight>%u</weight>\n",
+ def->blkio.weight);
+
+ for (n = 0; n < def->blkio.ndevices; n++) {
+ virBufferAddLit(buf, " <device>\n");
+ virBufferEscapeString(buf, " <path>%s</path>\n",
+ def->blkio.devices[n].path);
+ virBufferAsprintf(buf, " <weight>%u</weight>\n",
+ def->blkio.devices[n].weight);
+ virBufferAddLit(buf, " </device>\n");
+ }
+
virBufferAddLit(buf, " </blkiotune>\n");
}
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index a3cb834..d3c6381 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -1361,6 +1361,17 @@ struct _virDomainNumatuneDef {
/* Future NUMA tuning related stuff should go here. */
};
+typedef struct _virBlkioDeviceWeight virBlkioDeviceWeight;
+typedef virBlkioDeviceWeight *virBlkioDeviceWeightPtr;
+struct _virBlkioDeviceWeight {
+ char *path;
+ unsigned int weight;
+};
+
+void virBlkioDeviceWeightArrayClear(virBlkioDeviceWeightPtr deviceWeights,
+ int ndevices);
+
+
/*
* Guest VM main configuration
*
@@ -1378,6 +1389,9 @@ struct _virDomainDef {
struct {
unsigned int weight;
+
+ size_t ndevices;
+ virBlkioDeviceWeightPtr devices;
} blkio;
struct {
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index b15a8db..d78fd53 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -231,6 +231,7 @@ virDomainAuditVcpu;
# domain_conf.h
+virBlkioDeviceWeightArrayClear;
virDiskNameToBusDeviceIndex;
virDiskNameToIndex;
virDomainActualNetDefFree;
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-blkiotune-device.xml b/tests/qemuxml2argvdata/qemuxml2argv-blkiotune-device.xml
new file mode 100644
index 0000000..3412753
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-blkiotune-device.xml
@@ -0,0 +1,36 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory>219136</memory>
+ <currentMemory>219136</currentMemory>
+ <blkiotune>
+ <weight>800</weight>
+ <device>
+ <path>/dev/sda</path>
+ <weight>400</weight>
+ </device>
+ <device>
+ <path>/dev/sdb</path>
+ <weight>900</weight>
+ </device>
+ </blkiotune>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <disk type='block' device='disk'>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' unit='0'/>
+ </disk>
+ <controller type='ide' index='0'/>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tools/virsh.c b/tools/virsh.c
index 83dc3c7..a1d2afd 100644
--- a/tools/virsh.c
+++ b/tools/virsh.c
@@ -4648,6 +4648,8 @@ static const vshCmdOptDef opts_blkiotune[] = {
{"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")},
{"weight", VSH_OT_INT, VSH_OFLAG_NONE,
N_("IO Weight in range [100, 1000]")},
+ {"device-weights", VSH_OT_STRING, VSH_OFLAG_NONE,
+ N_("per-device IO Weights, in the form of /path/to/device,weight,...")},
{"config", VSH_OT_BOOL, 0, N_("affect next boot")},
{"live", VSH_OT_BOOL, 0, N_("affect running domain")},
{"current", VSH_OT_BOOL, 0, N_("affect current domain")},
@@ -4658,6 +4660,7 @@ static bool
cmdBlkiotune(vshControl * ctl, const vshCmd * cmd)
{
virDomainPtr dom;
+ const char *device_weight = NULL;
int weight = 0;
int nparams = 0;
int rv = 0;
@@ -4702,6 +4705,16 @@ cmdBlkiotune(vshControl * ctl, const vshCmd * cmd)
}
}
+ rv = vshCommandOptString(cmd, "device-weights", &device_weight);
+ if (rv < 0) {
+ vshError(ctl, "%s",
+ _("Unable to parse string parameter"));
+ goto cleanup;
+ }
+ if (rv > 0) {
+ nparams++;
+ }
+
if (nparams == 0) {
/* get the number of blkio parameters */
if (virDomainGetBlkioParameters(dom, NULL, &nparams, flags) != 0) {
@@ -4749,12 +4762,14 @@ cmdBlkiotune(vshControl * ctl, const vshCmd * cmd)
vshPrint(ctl, "%-15s: %d\n", params[i].field,
params[i].value.b);
break;
+ case VIR_TYPED_PARAM_STRING:
+ vshPrint(ctl, "%-15s: %s\n", params[i].field,
+ params[i].value.s);
+ break;
default:
vshPrint(ctl, "unimplemented blkio parameter type\n");
}
}
-
- ret = true;
} else {
/* set the blkio parameters */
params = vshCalloc(ctl, nparams, sizeof(*params));
@@ -4765,18 +4780,30 @@ cmdBlkiotune(vshControl * ctl, const vshCmd * cmd)
if (weight) {
temp->value.ui = weight;
- strncpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT,
- sizeof(temp->field));
- weight = 0;
+ if (!virStrcpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT,
+ sizeof(temp->field)))
+ goto cleanup;
+ }
+
+ if (device_weight) {
+ temp->value.s = vshStrdup(ctl, device_weight);
+ temp->type = VIR_TYPED_PARAM_STRING;
+ if (!virStrcpy(temp->field, VIR_DOMAIN_BLKIO_DEVICE_WEIGHT,
+ sizeof(temp->field)))
+ goto cleanup;
}
}
- if (virDomainSetBlkioParameters(dom, params, nparams, flags) != 0)
+
+ if (virDomainSetBlkioParameters(dom, params, nparams, flags) < 0) {
vshError(ctl, "%s", _("Unable to change blkio parameters"));
- else
- ret = true;
+ goto cleanup;
+ }
}
+ ret = true;
+
cleanup:
+ virTypedParameterArrayClear(params, nparams);
VIR_FREE(params);
virDomainFree(dom);
return ret;
diff --git a/tools/virsh.pod b/tools/virsh.pod
index 775d302..ef024c5 100644
--- a/tools/virsh.pod
+++ b/tools/virsh.pod
@@ -1032,12 +1032,18 @@ value are kilobytes (i.e. blocks of 1024 bytes).
Specifying -1 as a value for these limits is interpreted as unlimited.
-=item B<blkiotune> I<domain-id> [I<--weight> B<weight>] [[I<--config>]
+=item B<blkiotune> I<domain-id> [I<--weight> B<weight>]
+[I<--device-weights> B<device-weights>] [[I<--config>]
[I<--live>] | [I<--current>]]
Display or set the blkio parameters. QEMU/KVM supports I<--weight>.
I<--weight> is in range [100, 1000].
+B<device-weights> is a single string listing one or more device/weight
+pairs, in the format of /path/to/device,weight,/path/to/device,weight.
+Each weight is in the range [100, 1000], or the value 0 to remove that
+device from per-device listings.
+
If I<--live> is specified, affect a running guest.
If I<--config> is specified, affect the next boot of a persistent guest.
If I<--current> is specified, affect the current guest state.
--
1.7.7.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list