[RFC PATCH 4/4] powerpc: Remove incompatible command line options from qemu startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch is a hack at the moment and would need code refactoring to
split-out the defaults for x86 and powerpc.  Libvirt chooses a set of
default options such as disk controller, network specific options, etc
which are suitable for a x86 host.  These defaults are arch specific
and hence libvirt needs a runtime switch to setup defaults based on
host architecture.  Libvirt should have this routine split per-arch at
the right level with minimal code duplication.

---
 src/qemu/qemu_command.c |   30 +++++++++++++++++++++++++++++-
 1 files changed, 29 insertions(+), 1 deletions(-)

diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 0adc56a..3040f6a 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -1385,6 +1385,8 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
          * When QEMU grows support for > 1 PCI domain, then pci.0 change
          * to pciNN.0  where NN is the domain number
          */
+/* Prerna hack : remove PCI reference in command line */
+#if 0
         if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIBUS))
             virBufferAsprintf(buf, ",bus=pci.0");
         else
@@ -1394,6 +1396,7 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
                               info->addr.pci.slot, info->addr.pci.function);
         else
             virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
+#endif
     } else if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB) {
         virBufferAsprintf(buf, ",bus=");
         qemuUsbId(buf, info->addr.usb.bus);
@@ -1565,14 +1568,22 @@ qemuBuildDriveStr(virDomainDiskDefPtr disk,
             virBufferAsprintf(&opt, "file=%s,", disk->src);
         }
     }
+
+/* Prerna hack : force 'if=scsi' for powerKVM cmd line */
+#if 0
     if (qemuCapsGet(qemuCaps, QEMU_CAPS_DEVICE))
         virBufferAddLit(&opt, "if=none");
     else
-        virBufferAsprintf(&opt, "if=%s", bus);
+#endif
+ /* force 'if=scsi' for qemu command line output */
+    virBufferAsprintf(&opt, "if=%s", bus);
+
 
     if (disk->device == VIR_DOMAIN_DISK_DEVICE_CDROM)
         virBufferAddLit(&opt, ",media=cdrom");
 
+/* Prerna Hack : remove 'id=drive-scsi0-0-0' */
+#if 0
     if (qemuCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) {
         virBufferAsprintf(&opt, ",id=%s%s", QEMU_DRIVE_HOST_PREFIX, disk->info.alias);
     } else {
@@ -1586,6 +1597,8 @@ qemuBuildDriveStr(virDomainDiskDefPtr disk,
                 virBufferAsprintf(&opt, ",unit=%d", unitid);
         }
     }
+#endif
+
     if (bootable &&
         qemuCapsGet(qemuCaps, QEMU_CAPS_DRIVE_BOOT) &&
         disk->device == VIR_DOMAIN_DISK_DEVICE_DISK &&
@@ -3380,6 +3393,8 @@ qemuBuildCommandLine(virConnectPtr conn,
     if (!def->graphics)
         virCommandAddArg(cmd, "-nographic");
 
+/* Prerna hack : remove unnecesary options */
+#if 0
     if (qemuCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) {
         if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
             virCommandAddArg(cmd,
@@ -3387,6 +3402,7 @@ qemuBuildCommandLine(virConnectPtr conn,
         virCommandAddArg(cmd,
                          "-nodefaults");  /* Disable default guest devices */
     }
+#endif
 
     /* Serial graphics adapter */
     if (def->os.bios.useserial == VIR_DOMAIN_BIOS_USESERIAL_YES) {
@@ -3692,6 +3708,8 @@ qemuBuildCommandLine(virConnectPtr conn,
                 }
                 usblegacy = true;
             } else {
+/* Prerna hack : remove invocation for -drive lsi */
+#if 0
                 virCommandAddArg(cmd, "-device");
 
                 char *devstr;
@@ -3701,6 +3719,7 @@ qemuBuildCommandLine(virConnectPtr conn,
 
                 virCommandAddArg(cmd, devstr);
                 VIR_FREE(devstr);
+#endif
             }
         }
     }
@@ -3833,6 +3852,8 @@ qemuBuildCommandLine(virConnectPtr conn,
                                                bootindex);
                     }
                 } else {
+/* Prerna hack: Remove -device string */
+#if 0
                     virCommandAddArg(cmd, "-device");
 
                     if (!(optstr = qemuBuildDriveDevStr(disk, bootindex,
@@ -3840,6 +3861,7 @@ qemuBuildCommandLine(virConnectPtr conn,
                         goto error;
                     virCommandAddArg(cmd, optstr);
                     VIR_FREE(optstr);
+#endif
                 }
             }
         }
@@ -4250,9 +4272,12 @@ qemuBuildCommandLine(virConnectPtr conn,
                 virCommandAddArg(cmd, devstr);
                 VIR_FREE(devstr);
 
+/* Prerna hack : remove 'isa-serial' device */
+#if 0
                 virCommandAddArg(cmd, "-device");
                 virCommandAddArgFormat(cmd, "isa-serial,chardev=char%s,id=%s",
                                        serial->info.alias, serial->info.alias);
+#endif
             } else {
                 virCommandAddArg(cmd, "-serial");
                 if (!(devstr = qemuBuildChrArgStr(&serial->source, NULL)))
@@ -5089,6 +5114,8 @@ qemuBuildCommandLine(virConnectPtr conn,
      * NB: Earlier we declared that VirtIO balloon will always be in
      * slot 0x3 on bus 0x0
      */
+/* Prerna Hack : Remove all virtio-balloon devices */
+#if 0
     if ((def->memballoon) &&
         (def->memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_NONE)) {
         if (def->memballoon->model != VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO) {
@@ -5110,6 +5137,7 @@ qemuBuildCommandLine(virConnectPtr conn,
             virCommandAddArgList(cmd, "-balloon", "virtio", NULL);
         }
     }
+#endif
 
     if (snapshot)
         virCommandAddArgList(cmd, "-loadvm", snapshot->def->name, NULL);
-- 
1.7.0.4

-- 
Prerna Saxena

Linux Technology Centre,
IBM Systems and Technology Lab,
Bangalore, India

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list


[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]