When support for was added for PCI multifunction cards (in commit 9f8baf, first included in libvirt 0.9.3), it was done by always turning on the multifunction bit for all PCI devices. Since that time it has been realized that this is not an ideal solution, and that the multifunction bit must be selectively turned on. For example, see https://bugzilla.redhat.com/show_bug.cgi?id=728174 and the discussion before and after https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html This patch modifies multifunction support so that the multifunction=on option is only added to the qemu commandline for a device if its PCI <address> definition has the attribute "multifunction='on'", e.g.: <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> In practice, the multifunction bit should only be turned on if function='0' AND other functions will be used in the same slot - it usually isn't needed for functions 1-7 (although there are apparently some exceptions, e.g. the Intel X53 according to the QEMU source code), and should never be set if only function 0 will be used in the slot. The test cases have been changed accordingly to illustrate. With this patch in place, it is possible for a user to assign multiple functions in a slot without setting the multifunction bit for function 0; in this case, qemu will issue an error at startup time. In the future, we may decide to detect this situation and automatically add multifunction=on to avoid the error; even then it will still be useful to have a manual method of turning on multifunction since, as stated above, there are some devices that excpect it to be turned on for all functions in a slot. --- docs/formatdomain.html.in | 29 +++++++++++++------ docs/schemas/domaincommon.rng | 8 +++++ src/conf/domain_conf.c | 22 ++++++++++++++- src/conf/domain_conf.h | 10 +++++++ src/libvirt_private.syms | 2 + src/qemu/qemu_command.c | 18 ++++++++---- .../qemuxml2argv-multifunction-pci-device.args | 18 ++++++------ .../qemuxml2argv-multifunction-pci-device.xml | 6 ++-- .../qemuxml2argv-usb-ich9-companion.args | 10 +++--- .../qemuxml2argv-usb-ich9-companion.xml | 2 +- .../qemuxml2argv-usb-ich9-ehci-addr.args | 2 +- .../qemuxml2argv-usb-piix3-controller.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args | 10 +++--- tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args | 20 +++++++------- tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml | 4 +- 16 files changed, 111 insertions(+), 54 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 49a2c09..6308ebc 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -1118,10 +1118,14 @@ The <code>type</code> attribute is mandatory, and is typically "pci" or "drive". For a "pci" controller, additional attributes for <code>bus</code>, <code>slot</code>, - and <code>function</code> must be present, as well as an - optional <code>domain</code>. For a "drive" controller, - additional attributes <code>controller</code>, <code>bus</code>, + and <code>function</code> must be present, as well as + optional <code>domain</code> + and <code>multifunction</code><span class="since">since + 0.9.7, requires QEMU 0.13</span> (defaults to 'off'). For a + "drive" controller, additional attributes + <code>controller</code>, <code>bus</code>, and <code>unit</code> are available, each defaulting to 0. + </dd> </dl> @@ -1298,7 +1302,7 @@ </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> - <address type='pci' domain='0' bus='0' slot='4' function='0'/> + <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/> </controller> ... </devices> @@ -1431,10 +1435,16 @@ with <code>virsh nodedev-list</code>. The <code>bus</code> attribute allows the hexadecimal values 0 to ff, the <code>slot</code> attribute allows the hexadecimal values 0 to 1f, and - the <code>function</code> attribute allows the hexadecimal values 0 to - 7. There is also an optional <code>domain</code> attribute for the - PCI domain, with hexadecimal values 0 to ffff, but it is currently - not used by qemu.</dd> + the <code>function</code> attribute allows the hexadecimal values 0 to 7. + The <code>multifunction</code> attribute controls turning on the + multifunction bit for a particular slot/function in the PCI + control register<span class="since">since 0.9.7, requires QEMU + 0.13</span>. <code>multifunction</code> defaults to 'off', but + should be set to 'on' for function 0 of a slot that will have + multiple functions used. + There is also an optional <code>domain</code> attribute for + the PCI domain, with hexadecimal values 0 to ffff, but it is + currently not used by qemu.</dd> </dl> <h4><a name="elementsRedir">Redirected devices</a></h4> @@ -1602,7 +1612,8 @@ the interface to a particular pci slot, with attribute <code>type='pci'</code> and additional attributes <code>domain</code>, <code>bus</code>, <code>slot</code>, - and <code>function</code> as appropriate. + <code>function</code>, and <code>multifunction</code> + <span class="since">since 0.9.7, requires QEMU 0.13</span> as appropriate. </p> <h5><a name="elementsNICSVirtual">Virtual network</a></h5> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 4972fac..cffaac2 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -2118,6 +2118,14 @@ <attribute name="function"> <ref name="pciFunc"/> </attribute> + <optional> + <attribute name="multifunction"> + <choice> + <value>on</value> + <value>off</value> + </choice> + </attribute> + </optional> </define> <define name="driveaddress"> <optional> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index c141982..48e0985 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -138,6 +138,12 @@ VIR_ENUM_IMPL(virDomainDeviceAddress, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST, "ccid", "usb") +VIR_ENUM_IMPL(virDomainDeviceAddressPciMulti, + VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_LAST, + "default", + "on", + "off") + VIR_ENUM_IMPL(virDomainDisk, VIR_DOMAIN_DISK_TYPE_LAST, "block", "file", @@ -1652,6 +1658,10 @@ virDomainDeviceInfoFormat(virBufferPtr buf, info->addr.pci.bus, info->addr.pci.slot, info->addr.pci.function); + if (info->addr.pci.multi) { + virBufferAsprintf(buf, " multifunction='%s'", + virDomainDeviceAddressPciMultiTypeToString(info->addr.pci.multi)); + } break; case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE: @@ -1696,7 +1706,7 @@ static int virDomainDevicePCIAddressParseXML(xmlNodePtr node, virDomainDevicePCIAddressPtr addr) { - char *domain, *slot, *bus, *function; + char *domain, *slot, *bus, *function, *multi; int ret = -1; memset(addr, 0, sizeof(*addr)); @@ -1705,6 +1715,7 @@ virDomainDevicePCIAddressParseXML(xmlNodePtr node, bus = virXMLPropString(node, "bus"); slot = virXMLPropString(node, "slot"); function = virXMLPropString(node, "function"); + multi = virXMLPropString(node, "multifunction"); if (domain && virStrToLong_ui(domain, NULL, 0, &addr->domain) < 0) { @@ -1734,6 +1745,14 @@ virDomainDevicePCIAddressParseXML(xmlNodePtr node, goto cleanup; } + if (multi && + ((addr->multi = virDomainDeviceAddressPciMultiTypeFromString(multi)) < 0)) { + virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Unknown value '%s' for <address> 'multifunction' attribute"), + multi); + goto cleanup; + + } if (!virDomainDevicePCIAddressIsValid(addr)) { virDomainReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Insufficient specification for PCI address")); @@ -1747,6 +1766,7 @@ cleanup: VIR_FREE(bus); VIR_FREE(slot); VIR_FREE(function); + VIR_FREE(multi); return ret; } diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4a99ea4..bc41d34 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -74,6 +74,14 @@ enum virDomainDeviceAddressType { VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST }; +enum virDomainDeviceAddressPciMulti { + VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_DEFAULT = 0, + VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON, + VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_OFF, + + VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_LAST +}; + typedef struct _virDomainDevicePCIAddress virDomainDevicePCIAddress; typedef virDomainDevicePCIAddress *virDomainDevicePCIAddressPtr; struct _virDomainDevicePCIAddress { @@ -81,6 +89,7 @@ struct _virDomainDevicePCIAddress { unsigned int bus; unsigned int slot; unsigned int function; + int multi; /* enum virDomainDeviceAddressPciMulti */ }; typedef struct _virDomainDeviceDriveAddress virDomainDeviceDriveAddress; @@ -1830,6 +1839,7 @@ VIR_ENUM_DECL(virDomainLifecycle) VIR_ENUM_DECL(virDomainLifecycleCrash) VIR_ENUM_DECL(virDomainDevice) VIR_ENUM_DECL(virDomainDeviceAddress) +VIR_ENUM_DECL(virDomainDeviceAddressPciMulti) VIR_ENUM_DECL(virDomainDisk) VIR_ENUM_DECL(virDomainDiskDevice) VIR_ENUM_DECL(virDomainDiskBus) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index c2a3fab..1ac486f 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -269,6 +269,8 @@ virDomainDefParseNode; virDomainDefParseString; virDomainDeleteConfig; virDomainDeviceAddressIsValid; +virDomainDeviceAddressPciMultiTypeFromString; +virDomainDeviceAddressPciMultiTypeToString; virDomainDeviceAddressTypeToString; virDomainDeviceDefFree; virDomainDeviceDefParse; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index a13ba71..1704cf6 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1376,7 +1376,13 @@ qemuBuildDeviceAddressStr(virBufferPtr buf, if (info->addr.pci.function != 0) { qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Only PCI device addresses with function=0 " - "are supported")); + "are supported with this QEMU binary")); + return -1; + } + if (info->addr.pci.multi == VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON) { + qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("'multifunction=on' is not supported with " + "this QEMU binary")); return -1; } } @@ -1391,11 +1397,11 @@ qemuBuildDeviceAddressStr(virBufferPtr buf, virBufferAsprintf(buf, ",bus=pci.0"); else virBufferAsprintf(buf, ",bus=pci"); - if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION)) - virBufferAsprintf(buf, ",multifunction=on,addr=0x%x.0x%x", - info->addr.pci.slot, info->addr.pci.function); - else - virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot); + if (info->addr.pci.multi == VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON) + virBufferAddLit(buf, ",multifunction=on"); + virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot); + if (info->addr.pci.function != 0) + virBufferAsprintf(buf, ".0x%x", info->addr.pci.function); } else if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB) { virBufferAsprintf(buf, ",bus="); qemuUsbId(buf, info->addr.usb.bus); diff --git a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args index ff229f2..ee85cda 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args @@ -1,15 +1,15 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \ pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults \ -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ --device lsi,id=scsi0,bus=pci.0,multifunction=on,addr=0x3.0x0 \ --device lsi,id=scsi1,bus=pci.0,multifunction=on,addr=0x4.0x0 \ +-device lsi,id=scsi0,bus=pci.0,addr=0x3 \ +-device lsi,id=scsi1,bus=pci.0,multifunction=on,addr=0x4 \ -device lsi,id=scsi2,bus=pci.0,multifunction=on,addr=0x4.0x1 \ --device lsi,id=scsi3,bus=pci.0,multifunction=on,addr=0x4.0x2 \ --device lsi,id=scsi4,bus=pci.0,multifunction=on,addr=0x4.0x3 \ --device lsi,id=scsi5,bus=pci.0,multifunction=on,addr=0x4.0x4 \ --device lsi,id=scsi6,bus=pci.0,multifunction=on,addr=0x4.0x5 \ --device lsi,id=scsi7,bus=pci.0,multifunction=on,addr=0x4.0x6 \ --device lsi,id=scsi8,bus=pci.0,multifunction=on,addr=0x4.0x7 \ +-device lsi,id=scsi3,bus=pci.0,addr=0x4.0x2 \ +-device lsi,id=scsi4,bus=pci.0,addr=0x4.0x3 \ +-device lsi,id=scsi5,bus=pci.0,addr=0x4.0x4 \ +-device lsi,id=scsi6,bus=pci.0,addr=0x4.0x5 \ +-device lsi,id=scsi7,bus=pci.0,addr=0x4.0x6 \ +-device lsi,id=scsi8,bus=pci.0,addr=0x4.0x7 \ -drive file=/tmp/scsidisk.img,if=none,id=drive-scsi0-0-0 \ -device scsi-disk,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0 \ --usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x5.0x0 +-usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml index 672fb61..24b95b8 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml @@ -20,13 +20,13 @@ <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='scsi' index='0'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0' multifunction='off'/> </controller> <controller type='scsi' index='1'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> </controller> <controller type='scsi' index='2'> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1' multifunction='on'/> </controller> <controller type='scsi' index='3'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x2'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args index 1007544..fea6c35 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args @@ -1,6 +1,6 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \ --device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 \ --device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \ --device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \ --device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \ --device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0 +-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \ +-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \ +-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1 \ +-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml index 05a6adf..5a43638 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml @@ -15,7 +15,7 @@ </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> - <address type='pci' domain='0' bus='0' slot='4' function='0'/> + <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args index 0059ab5..94a4602 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args @@ -1 +1 @@ -LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0 +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args index 06863bb..546d119 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args @@ -1 +1 @@ -LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device piix3-usb-uhci,id=usb,bus=pci.0,multifunction=on,addr=0x1.0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0 +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args index f6270d5..7d34c2a 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args @@ -1,10 +1,10 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \ --device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 \ --device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \ --device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \ --device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \ +-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \ +-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \ +-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1 \ +-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2 \ -chardev socket,id=charredir0,host=localhost,port=4000 \ -device usb-redir,chardev=charredir0,id=redir0 \ -chardev spicevmc,id=charredir1,name=usbredir \ -device usb-redir,chardev=charredir1,id=redir1,bus=usb.0,port=4 \ --device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0 +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml index 1dac3fb..a359a3d 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml @@ -19,7 +19,7 @@ </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> - <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args index be4a78e..580cace 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args @@ -1,15 +1,15 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \ --device piix3-usb-uhci,id=usb,bus=pci.0,multifunction=on,addr=0x1.0x2 \ --device ich9-usb-ehci1,id=usb1,bus=pci.0,multifunction=on,addr=0x4.0x7 \ --device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \ --device ich9-usb-uhci2,masterbus=usb1.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \ --device ich9-usb-uhci3,masterbus=usb1.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \ --device ich9-usb-ehci1,id=usb2,bus=pci.0,multifunction=on,addr=0x5.0x7 \ --device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5.0x0 \ --device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.0,multifunction=on,addr=0x5.0x1 \ --device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.0,multifunction=on,addr=0x5.0x2 \ +-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \ +-device ich9-usb-ehci1,id=usb1,bus=pci.0,addr=0x4.0x7 \ +-device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \ +-device ich9-usb-uhci2,masterbus=usb1.0,firstport=2,bus=pci.0,addr=0x4.0x1 \ +-device ich9-usb-uhci3,masterbus=usb1.0,firstport=4,bus=pci.0,addr=0x4.0x2 \ +-device ich9-usb-ehci1,id=usb2,bus=pci.0,addr=0x5.0x7 \ +-device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5 \ +-device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.0,addr=0x5.0x1 \ +-device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.0,addr=0x5.0x2 \ -device usb-hub,id=hub0,bus=usb1.0,port=1 \ -device usb-tablet,id=input0,bus=usb.0,port=2 \ -device usb-host,hostbus=14,hostaddr=6,id=hostdev0,bus=usb2.0,port=1 \ -device usb-host,hostbus=14,hostaddr=7,id=hostdev1,bus=usb2.0,port=2 \ --device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0 +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml index e8ada4d..b12b841 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml @@ -21,7 +21,7 @@ </controller> <controller type='usb' index='1' model='ich9-uhci1'> <master startport='0'/> - <address type='pci' domain='0' bus='0' slot='4' function='0'/> + <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/> </controller> <controller type='usb' index='1' model='ich9-uhci2'> <master startport='2'/> @@ -37,7 +37,7 @@ </controller> <controller type='usb' index='2' model='ich9-uhci1'> <master startport='0'/> - <address type='pci' domain='0' bus='0' slot='5' function='0'/> + <address type='pci' domain='0' bus='0' slot='5' function='0' multifunction='on'/> </controller> <controller type='usb' index='2' model='ich9-uhci2'> <master startport='2'/> -- 1.7.3.4 -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list