[PATCH v4 1/7] bandwidth: Define schema and create documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Define new 'bandwidth' element with possible child element 'inbound'
and 'outbound' addressing incoming and outgoing traffic respectively:

<bandwidth>
  <inbound average='1000' peak='2000' burst='5120'/>
  <outbound average='500'/>
</bandwidth>

Leaving any element out means not to shape traffic in that
direction.
The units for average and peak (rate) are in kilobytes per second,
for burst (size) are just in kilobytes.
This element can be inserted into domain's 'interface' and
'network'.
---
 docs/formatdomain.html.in      |   34 ++++++++++++++++++++++++++++
 docs/formatnetwork.html.in     |   30 +++++++++++++++++++++++++
 docs/schemas/domain.rng        |    3 ++
 docs/schemas/network.rng       |    3 ++
 docs/schemas/networkcommon.rng |   48 ++++++++++++++++++++++++++++++++++++++++
 5 files changed, 118 insertions(+), 0 deletions(-)

diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 83146ed..f40afc4 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1882,6 +1882,40 @@ qemu-kvm -net nic,model=? /dev/null
       <span class="since">Since 0.8.8</span>
     </p>
 
+    <h5><a name="elementQoS">Quality of service</a></h5>
+
+<pre>
+  ...
+  &lt;devices&gt;
+    &lt;interface type='network'&gt;
+      &lt;source network='default'/&gt;
+      &lt;target dev='vnet0'/&gt;
+      <b>&lt;bandwidth&gt;
+        &lt;inbound average='1000' peak='5000' burst='1024'/&gt;
+        &lt;outbound average='128' peak='256' burst='256'/&gt;
+      &lt;/bandwidth&gt;</b>
+    &lt;/interface&gt;
+  &lt;devices&gt;
+  ...</pre>
+
+    <p>
+      This part of interface XML provides setting quality of service. Incoming
+      and outgoing traffic can be shaped independently. The
+      <code>bandwidth</code> element can have at most one <code>inbound</code>
+      and at most one <code>outbound</code> child elements. Leaving any of these
+      children element out result in no QoS applied on that traffic direction.
+      So, when you want to shape only domain's incoming traffic, use
+      <code>inbound</code> only, and vice versa. Each of these elements have one
+      mandatory attribute <code>average</code>. It specifies average bit rate on
+      interface being shaped. Then there are two optional attributes:
+      <code>peak</code>, which specifies maximum rate at which interface can send
+      data, and <code>burst</code>, amount of bytes that can be burst at
+      <code>peak</code> speed. Accepted values for attributes are integer
+      numbers. The units for <code>average</code> and <code>peak</code> attributes
+      are kilobytes per second, and for the <code>burst</code> just kilobytes.
+      <span class="since">Since 0.9.4</span>
+    </p>
+
     <h4><a name="elementsInput">Input devices</a></h4>
 
     <p>
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index f9421c3..f0ff703 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -101,6 +101,36 @@
         to this host. <span class="since">Since 0.3.0; 'mode' attribute since
         0.4.2</span></dd>
     </dl>
+    <h5><a name="elementQoS">Quality of service</a></h5>
+
+<pre>
+...
+  &lt;forward mode='nat' dev='eth0'/&gt;
+  <b>&lt;bandwidth&gt;
+    &lt;inbound average='1000' peak='5000' burst='5120'/&gt;
+    &lt;outbound average='128' peak='256' burst='256'/&gt;
+  &lt;/bandwidth&gt;</b>
+  &lt;mac address='00:16:3E:5D:C7:9E'/&gt;
+...</pre>
+
+      <p>
+        This part of network XML provides setting quality of service. Incoming
+        and outgoing traffic can be shaped independently. The
+        <code>bandwidth</code> element can have at most one <code>inbound</code>
+        and at most one <code>outbound</code> child elements. Leaving any of these
+        children element out result in no QoS applied on that traffic direction.
+        So, when you want to shape only network's incoming traffic, use
+        <code>inbound</code> only, and vice versa. Each of these elements have one
+        mandatory attribute <code>average</code>. It specifies average bit rate on
+        interface being shaped. Then there are two optional attributes:
+        <code>peak</code>, which specifies maximum rate at which bridge can send
+        data, and <code>burst</code>, amount of bytes that can be burst at
+        <code>peak</code> speed. Accepted values for attributes are integer
+        numbers, The units for <code>average</code> and <code>peak</code> attributes
+        are kilobytes per second, and for the <code>burst</code> just kilobytes.
+        The rate is shared equally within domains connected to the network.
+        <span class="since">Since 0.9.4</span>
+      </p>
 
     <h3><a name="elementsAddress">Addressing</a></h3>
 
diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng
index 43326ab..aa4ce69 100644
--- a/docs/schemas/domain.rng
+++ b/docs/schemas/domain.rng
@@ -1189,6 +1189,9 @@
       <optional>
         <ref name="deviceBoot"/>
       </optional>
+      <optional>
+        <ref name="bandwidth"/>
+      </optional>
     </interleave>
   </define>
   <!--
diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng
index 1adb553..1c44471 100644
--- a/docs/schemas/network.rng
+++ b/docs/schemas/network.rng
@@ -147,6 +147,9 @@
               </zeroOrMore>
             </element>
         </optional>
+       <optional>
+         <ref name="bandwidth"/>
+       </optional>
 
         <!-- <ip> element -->
         <zeroOrMore>
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 0251813..3a168c3 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -47,4 +47,52 @@
       </group>
     </choice>
   </define>
+
+  <define name="bandwidth">
+    <element name="bandwidth">
+      <interleave>
+        <optional>
+          <element name="inbound">
+            <ref name="bandwidth-attributes"/>
+            <empty/>
+          </element>
+        </optional>
+        <optional>
+          <element name="outbound">
+            <ref name="bandwidth-attributes"/>
+            <empty/>
+          </element>
+        </optional>
+      </interleave>
+    </element>
+  </define>
+
+  <define name="bandwidth-attributes">
+    <attribute name="average">
+      <ref name="speed"/>
+    </attribute>
+    <optional>
+      <attribute name="peak">
+        <ref name="speed"/>
+      </attribute>
+    </optional>
+    <optional>
+      <attribute name='burst'>
+        <ref name="BurstSize"/>
+      </attribute>
+    </optional>
+  </define>
+
+  <define name="speed">
+    <data type="unsignedInt">
+      <param name="pattern">[0-9]+</param>
+      <param name="minInclusive">1</param>
+    </data>
+  </define>
+  <define name="BurstSize">
+    <data type="unsignedInt">
+      <param name="pattern">[0-9]+</param>
+      <param name="minInclusive">1</param>
+    </data>
+  </define>
 </grammar>
-- 
1.7.5.rc3

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list


[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]