[Libvirt-test-API][PATCH] Modify try/except/finally format in all testcases for python backward compatibility

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wayne Sun <gsun@xxxxxxxxxx>

* modify all cases under repos/ of try/except/finally format
* delete utils/Python/virt.cfg which in wrong place

Signed-off-by: Guannan Ren <gren@xxxxxxxxxx>
---
 repos/domain/attach_disk.py            |   29 ++++----
 repos/domain/attach_interface.py       |   29 ++++----
 repos/domain/autostart.py              |   29 ++++----
 repos/domain/blkstats.py               |    9 +-
 repos/domain/create.py                 |   13 ++--
 repos/domain/define.py                 |   19 +++--
 repos/domain/destroy.py                |   13 ++--
 repos/domain/detach_disk.py            |   29 ++++----
 repos/domain/detach_interface.py       |   31 ++++----
 repos/domain/domain_uuid.py            |   25 +++---
 repos/domain/reboot.py                 |   13 ++--
 repos/domain/save.py                   |   25 +++---
 repos/domain/undefine.py               |   19 +++--
 repos/interface/create.py              |   29 ++++----
 repos/interface/define.py              |   25 +++---
 repos/interface/destroy.py             |   29 ++++----
 repos/interface/undefine.py            |   25 +++---
 repos/network/autostart.py             |   39 +++++-----
 repos/network/create.py                |   31 ++++----
 repos/network/define.py                |   29 ++++----
 repos/network/destroy.py               |   31 ++++----
 repos/network/network_name.py          |   25 +++---
 repos/network/network_uuid.py          |   25 +++---
 repos/network/undefine.py              |   29 ++++----
 repos/nodedevice/detach.py             |   33 ++++----
 repos/nodedevice/reattach.py           |   33 ++++----
 repos/nodedevice/reset.py              |   21 +++---
 repos/npiv/create_virtual_hba.py       |   35 +++++----
 repos/snapshot/delete.py               |   23 +++---
 repos/snapshot/internal_create.py      |   15 ++--
 repos/snapshot/revert.py               |   15 ++--
 repos/storage/activate_pool.py         |   23 +++---
 repos/storage/build_dir_pool.py        |   27 ++++---
 repos/storage/build_disk_pool.py       |   27 ++++---
 repos/storage/build_logical_pool.py    |   29 ++++----
 repos/storage/build_netfs_pool.py      |   27 ++++---
 repos/storage/create_dir_pool.py       |   25 +++---
 repos/storage/create_dir_volume.py     |   13 ++--
 repos/storage/create_fs_pool.py        |   35 +++++----
 repos/storage/create_iscsi_pool.py     |   25 +++---
 repos/storage/create_logical_volume.py |   31 ++++----
 repos/storage/create_netfs_pool.py     |   35 +++++----
 repos/storage/create_netfs_volume.py   |   13 ++--
 repos/storage/define_dir_pool.py       |   37 +++++-----
 repos/storage/define_disk_pool.py      |   31 ++++----
 repos/storage/define_iscsi_pool.py     |   29 ++++----
 repos/storage/define_logical_pool.py   |   29 ++++----
 repos/storage/define_mpath_pool.py     |   31 ++++----
 repos/storage/define_netfs_pool.py     |   29 ++++----
 repos/storage/define_scsi_pool.py      |   31 ++++----
 repos/storage/delete_dir_volume.py     |   27 ++++---
 repos/storage/delete_logical_pool.py   |   29 ++++----
 repos/storage/delete_logical_volume.py |   31 ++++----
 repos/storage/delete_netfs_volume.py   |   27 ++++---
 repos/storage/pool_name.py             |   23 +++---
 repos/storage/pool_uuid.py             |   23 +++---
 repos/storage/undefine_pool.py         |   29 ++++----
 utils/Python/virt.cfg                  |  129 --------------------------------
 58 files changed, 774 insertions(+), 846 deletions(-)
 delete mode 100644 utils/Python/virt.cfg

diff --git a/repos/domain/attach_disk.py b/repos/domain/attach_disk.py
index b8fd8ef..3a1175e 100644
--- a/repos/domain/attach_disk.py
+++ b/repos/domain/attach_disk.py
@@ -120,21 +120,22 @@ def attach_disk(params):
 
     # Attach disk to domain
     try:
-        domobj.attach_device(guestname, diskxml)
-        disk_num2 = util.dev_num(guestname, "disk")
-        logger.debug("update disk number to %s" %disk_num2)
-        if  check_attach_disk(disk_num1, disk_num2):
-            logger.info("current disk number: %s\n" %disk_num2)
-            test_result = True
-        else:
-            logger.error("fail to attach a disk to guest: %s\n" %disk_num2)
+        try:
+            domobj.attach_device(guestname, diskxml)
+            disk_num2 = util.dev_num(guestname, "disk")
+            logger.debug("update disk number to %s" %disk_num2)
+            if  check_attach_disk(disk_num1, disk_num2):
+                logger.info("current disk number: %s\n" %disk_num2)
+                test_result = True
+            else:
+                logger.error("fail to attach a disk to guest: %s\n" %disk_num2)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" %
+                         (e.response()['message'], e.response()['code']))
+            logger.error("attach %s disk to guest %s" % (imagename, guestname))
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" %
-                     (e.response()['message'], e.response()['code']))
-        logger.error("attach %s disk to guest %s" % (imagename, guestname))
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/attach_interface.py b/repos/domain/attach_interface.py
index 351e57e..9d475a3 100644
--- a/repos/domain/attach_interface.py
+++ b/repos/domain/attach_interface.py
@@ -89,21 +89,22 @@ def attach_interface(params):
 
     # Attach interface to domain
     try:
-        domobj.attach_device(guestname, interfacexml)
-        iface_num2 = util.dev_num(guestname, "interface")
-        logger.debug("update interface number to %s" %iface_num2)
-        if  check_attach_interface(iface_num1, iface_num2):
-            logger.info("current interface number: %s" %iface_num2)
-            test_result = True
-        else:
-            logger.error("fail to attach a interface to guest: %s" %iface_num2)
+        try:
+            domobj.attach_device(guestname, interfacexml)
+            iface_num2 = util.dev_num(guestname, "interface")
+            logger.debug("update interface number to %s" %iface_num2)
+            if  check_attach_interface(iface_num1, iface_num2):
+                logger.info("current interface number: %s" %iface_num2)
+                test_result = True
+            else:
+                logger.error("fail to attach a interface to guest: %s" %iface_num2)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s"  %
+                         (e.response()['message'], e.response()['code']))
+            logger.error("attach a interface to guest %s" % guestname)
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s"  %
-                     (e.response()['message'], e.response()['code']))
-        logger.error("attach a interface to guest %s" % guestname)
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection") 
diff --git a/repos/domain/autostart.py b/repos/domain/autostart.py
index 2a1f0c8..f0fc97c 100644
--- a/repos/domain/autostart.py
+++ b/repos/domain/autostart.py
@@ -94,21 +94,22 @@ def autostart(params):
     # Set autostart for domain
     domobj = domainAPI.DomainAPI(virconn)
     try:
-        domobj.set_auto_start(guestname, flag)
-        if check_guest_autostart(guestname, uri.split(":")[0], flag, logger):
-            logger.info("current %s autostart: %s" %
-                        (guestname, domobj.get_auto_start(guestname)))
-            logger.info("executing autostart operation is successful")
-            test_result = True
-        else:
-            logger.error("Error: fail to check autostart domain")
+        try:
+            domobj.set_auto_start(guestname, flag)
+            if check_guest_autostart(guestname, uri.split(":")[0], flag, logger):
+                logger.info("current %s autostart: %s" %
+                            (guestname, domobj.get_auto_start(guestname)))
+                logger.info("executing autostart operation is successful")
+                test_result = True
+            else:
+                logger.error("Error: fail to check autostart domain")
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" %
+                         (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to autostart %s domain" %guestname)
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" %
-                     (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to autostart %s domain" %guestname)
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/blkstats.py b/repos/domain/blkstats.py
index 4c35ca3..05dbb83 100644
--- a/repos/domain/blkstats.py
+++ b/repos/domain/blkstats.py
@@ -72,10 +72,11 @@ def block_stats(params):
         domobj.start(guestname)
         time.sleep(90)
     try:
-        (blkstats, path) = domobj.get_block_stats(guestname)
-    except exception.LibvirtAPI, e:
-        logger.error("libvirt error: error code - %s; error message - %s" %(e.code, e.message))
-        return 1;
+        try:
+            (blkstats, path) = domobj.get_block_stats(guestname)
+        except exception.LibvirtAPI, e:
+            logger.error("libvirt error: error code - %s; error message - %s" %(e.code, e.message))
+            return 1;
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/create.py b/repos/domain/create.py
index 2bb759d..343aba2 100644
--- a/repos/domain/create.py
+++ b/repos/domain/create.py
@@ -98,12 +98,13 @@ def create(params):
 
     # Create domain from xml
     try:
-        domobj.create(domxml)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" %
-                      (e.response()['message'], e.response()['code']))
-        logger.error("fail to create domain %s" % guestname)
-        return 1
+        try:
+            domobj.create(domxml)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" %
+                          (e.response()['message'], e.response()['code']))
+            logger.error("fail to create domain %s" % guestname)
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/define.py b/repos/domain/define.py
index 8ad7843..d965f63 100644
--- a/repos/domain/define.py
+++ b/repos/domain/define.py
@@ -115,16 +115,17 @@ def define(params):
 
     # Define domain from xml
     try:
-        dom_obj.define(dom_xml)
-        if  check_define_domain(guestname, guesttype, logger):
-            logger.info("define a domain form xml is successful")
-            test_result = True
-        else:
-            logger.error("fail to check define domain")
+        try:
+            dom_obj.define(dom_xml)
+            if  check_define_domain(guestname, guesttype, logger):
+                logger.info("define a domain form xml is successful")
+                test_result = True
+            else:
+                logger.error("fail to check define domain")
+                test_result = False
+        except:
+            logger.error("fail to define a domain from xml")
             test_result = False
-    except:
-        logger.error("fail to define a domain from xml")
-        test_result = False
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/destroy.py b/repos/domain/destroy.py
index f06a1f6..f98b602 100644
--- a/repos/domain/destroy.py
+++ b/repos/domain/destroy.py
@@ -88,12 +88,13 @@ def destroy(params):
 
     # Destroy domain
     try:
-        dom_obj.destroy(guestname)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        logger.error("fail to destroy domain")
-        return 1
+        try:
+            dom_obj.destroy(guestname)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
+            logger.error("fail to destroy domain")
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/detach_disk.py b/repos/domain/detach_disk.py
index 3972c3f..21c6598 100644
--- a/repos/domain/detach_disk.py
+++ b/repos/domain/detach_disk.py
@@ -99,21 +99,22 @@ def detach_disk(params):
             time.sleep(90)
 
     try:
-        domobj.detach_device(guestname, diskxml)
-        disk_num2 = util.dev_num(guestname, "disk")
-        logger.debug("update disk number to %s" %disk_num2)
-        if  check_detach_disk(disk_num1, disk_num2):
-            logger.info("current disk number: %s\n" %disk_num2)
-            test_result = True
-        else:
-            logger.error("fail to detach a disk to guest: %s\n" %disk_num2)
+        try:
+            domobj.detach_device(guestname, diskxml)
+            disk_num2 = util.dev_num(guestname, "disk")
+            logger.debug("update disk number to %s" %disk_num2)
+            if  check_detach_disk(disk_num1, disk_num2):
+                logger.info("current disk number: %s\n" %disk_num2)
+                test_result = True
+            else:
+                logger.error("fail to detach a disk to guest: %s\n" %disk_num2)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
+            logger.error("detach %s disk from guest %s" % (imagename, guestname))
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        logger.error("detach %s disk from guest %s" % (imagename, guestname))
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/detach_interface.py b/repos/domain/detach_interface.py
index 5eee836..6639336 100644
--- a/repos/domain/detach_interface.py
+++ b/repos/domain/detach_interface.py
@@ -101,22 +101,23 @@ def detach_interface(params):
         time.sleep(90)
 
     try:
-        domobj.detach_device(guestname, ifacexml)
-        iface_num2 = util.dev_num(guestname, "interface")
-        logger.debug("update interface number to %s" % iface_num2)
-        if  check_detach_interface(iface_num1, iface_num2):
-            logger.info("current interface number: %s" % iface_num2)
-            test_result = True
-        else:
-            logger.error("fail to detach a interface to guest: %s" %
-                          iface_num2)
+        try:
+            domobj.detach_device(guestname, ifacexml)
+            iface_num2 = util.dev_num(guestname, "interface")
+            logger.debug("update interface number to %s" % iface_num2)
+            if  check_detach_interface(iface_num1, iface_num2):
+                logger.info("current interface number: %s" % iface_num2)
+                test_result = True
+            else:
+                logger.error("fail to detach a interface to guest: %s" %
+                              iface_num2)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
+            logger.error("detach the interface from guest %s" % guestname)
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        logger.error("detach the interface from guest %s" % guestname)
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/domain_uuid.py b/repos/domain/domain_uuid.py
index 05bd7e1..8b02a15 100644
--- a/repos/domain/domain_uuid.py
+++ b/repos/domain/domain_uuid.py
@@ -85,19 +85,20 @@ def domuuid(params):
         return 1
 
     try:
-        logger.info("get the UUID string of %s" % guestname)
-        UUIDString = domobj.get_uuid_string(guestname)
-        if check_domain_uuid(guestname, UUIDString, logger):
-            logger.info("UUIDString from API is the same as the one from virsh")
-            logger.info("UUID String is %s" % UUIDString)
-            return 0
-        else:
-            logger.error("UUIDString from API is not the same as the one from virsh")
+        try:
+            logger.info("get the UUID string of %s" % guestname)
+            UUIDString = domobj.get_uuid_string(guestname)
+            if check_domain_uuid(guestname, UUIDString, logger):
+                logger.info("UUIDString from API is the same as the one from virsh")
+                logger.info("UUID String is %s" % UUIDString)
+                return 0
+            else:
+                logger.error("UUIDString from API is not the same as the one from virsh")
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/reboot.py b/repos/domain/reboot.py
index aabeb88..03172c4 100644
--- a/repos/domain/reboot.py
+++ b/repos/domain/reboot.py
@@ -81,12 +81,13 @@ def reboot(params):
 
     # Reboot domain
     try:
-        dom_obj.reboot(domain_name)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" %
-                     (e.response()['message'], e.response()['code']))
-        logger.error("fail to reboot domain")
-        return 1
+        try:
+            dom_obj.reboot(domain_name)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" %
+                         (e.response()['message'], e.response()['code']))
+            logger.error("fail to reboot domain")
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/save.py b/repos/domain/save.py
index 33d8d41..d9782e3 100644
--- a/repos/domain/save.py
+++ b/repos/domain/save.py
@@ -124,20 +124,21 @@ def save(params):
         logger.info("closed hypervisor connection")
         return 1
     try:
-        domobj.save(guestname, filepath)
-        if check_guest_save(guestname, domobj, util, logger):
-            logger.info("save %s domain successful" %guestname)
-            test_result = True
-        else:
-            logger.error("Error: fail to check save domain")
+        try:
+            domobj.save(guestname, filepath)
+            if check_guest_save(guestname, domobj, util, logger):
+                logger.info("save %s domain successful" %guestname)
+                test_result = True
+            else:
+                logger.error("Error: fail to check save domain")
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                          (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to save %s domain" %guestname)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                      (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to save %s domain" %guestname)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/domain/undefine.py b/repos/domain/undefine.py
index 02ca5bd..13412fa 100644
--- a/repos/domain/undefine.py
+++ b/repos/domain/undefine.py
@@ -70,16 +70,17 @@ def undefine(params):
     dom_obj = domainAPI.DomainAPI(virconn)
 
     try:
-        dom_obj.undefine(guestname)
-        if  check_undefine_domain(guestname):
-            logger.info("undefine the domain is successful")
-            test_result = True
-        else:
-            logger.error("fail to check domain undefine")
+        try:
+            dom_obj.undefine(guestname)
+            if  check_undefine_domain(guestname):
+                logger.info("undefine the domain is successful")
+                test_result = True
+            else:
+                logger.error("fail to check domain undefine")
+                test_result = False
+        except:
+            logger.error("fail to undefine the domain")
             test_result = False
-    except:
-        logger.error("fail to undefine the domain")
-        test_result = False
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/interface/create.py b/repos/interface/create.py
index 6aabfe7..41e5dcc 100644
--- a/repos/interface/create.py
+++ b/repos/interface/create.py
@@ -110,22 +110,23 @@ def create(params):
 
 
     try:
-        ifaceobj.create(ifacename)
-        logger.info("create host interface %s" % ifacename)
-        display_current_interface(ifaceobj)
-        if  check_create_interface(ifacename, util):
-            logger.info("create host interface %s is successful" % ifacename)
-            test_result = True
-        else:
-            logger.error("fail to check create interface")
+        try:
+            ifaceobj.create(ifacename)
+            logger.info("create host interface %s" % ifacename)
+            display_current_interface(ifaceobj)
+            if  check_create_interface(ifacename, util):
+                logger.info("create host interface %s is successful" % ifacename)
+                test_result = True
+            else:
+                logger.error("fail to check create interface")
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to create interface %s" %ifacename)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to create interface %s" %ifacename)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/interface/define.py b/repos/interface/define.py
index 4d996ab..054bd54 100644
--- a/repos/interface/define.py
+++ b/repos/interface/define.py
@@ -103,20 +103,21 @@ def define(params):
     logger.debug("interface xml:\n%s" %iface_xml)
 
     try:
-        ifaceobj.define(iface_xml)
-        if  check_define_interface(ifacename):
-            logger.info("define a interface form xml is successful")
-            test_result = True
-        else:
-            logger.error("fail to check define interface")
+        try:
+            ifaceobj.define(iface_xml)
+            if  check_define_interface(ifacename):
+                logger.info("define a interface form xml is successful")
+                test_result = True
+            else:
+                logger.error("fail to check define interface")
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to define a interface from xml")
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to define a interface from xml")
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/interface/destroy.py b/repos/interface/destroy.py
index 2467aa6..771fa74 100644
--- a/repos/interface/destroy.py
+++ b/repos/interface/destroy.py
@@ -111,22 +111,23 @@ def destroy(params):
     #logger.debug("interface xml:\n%s" %iface_xml)
 
     try:
-        ifaceobj.destroy(ifacename)
-        logger.info("destroy host interface %s" % ifacename)
-        display_current_interface(ifaceobj)
-        if  check_destroy_interface(hostip):
-            logger.info("destroy host interface %s is successful" % ifacename)
-            test_result = True
-        else:
-            logger.error("fail to check destroy interface")
+        try:
+            ifaceobj.destroy(ifacename)
+            logger.info("destroy host interface %s" % ifacename)
+            display_current_interface(ifaceobj)
+            if  check_destroy_interface(hostip):
+                logger.info("destroy host interface %s is successful" % ifacename)
+                test_result = True
+            else:
+                logger.error("fail to check destroy interface")
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to destroy interface %s" %ifacename)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to destroy interface %s" %ifacename)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/interface/undefine.py b/repos/interface/undefine.py
index 61f90bf..7d49942 100644
--- a/repos/interface/undefine.py
+++ b/repos/interface/undefine.py
@@ -98,20 +98,21 @@ def undefine(params):
     ifaceobj = interfaceAPI.InterfaceAPI(virconn)
 
     try:
-        ifaceobj.undefine(ifacename)
-        if  check_undefine_interface(ifacename):
-            logger.info("undefine a interface form xml is successful")
-            test_result = True
-        else:
-            logger.error("fail to check undefine interface")
+        try:
+            ifaceobj.undefine(ifacename)
+            if  check_undefine_interface(ifacename):
+                logger.info("undefine a interface form xml is successful")
+                test_result = True
+            else:
+                logger.error("fail to check undefine interface")
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to undefine a interface from xml")
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to undefine a interface from xml")
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/autostart.py b/repos/network/autostart.py
index 0c4bd5a..ba4b4f1 100644
--- a/repos/network/autostart.py
+++ b/repos/network/autostart.py
@@ -113,26 +113,27 @@ def autostart(params):
     logger.debug("the output of 'virsh net-list --all' is %s" % text)
 
     try:
-        netobj.setnetAutostart(networkname, flag)
-        if check_network_autostart(networkname,
-                                   "qemu",
-                                   flag,
-                                   logger):
-            logger.info("current virtual network %s autostart: %s" % \
-                         (networkname, netobj.get_autostart(networkname)))
-            logger.info("executing autostart operation is successful")
-            test_result = True
-        else:
-            logger.error("Error: fail to check autostart status of \
-                          virtual network %s" % networkname)
+        try:
+            netobj.setnetAutostart(networkname, flag)
+            if check_network_autostart(networkname,
+                                       "qemu",
+                                       flag,
+                                       logger):
+                logger.info("current virtual network %s autostart: %s" % \
+                             (networkname, netobj.get_autostart(networkname)))
+                logger.info("executing autostart operation is successful")
+                test_result = True
+            else:
+                logger.error("Error: fail to check autostart status of \
+                              virtual network %s" % networkname)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to autostart virtual network %s " % \
+                          networkname)
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to autostart virtual network %s " % \
-                      networkname)
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/create.py b/repos/network/create.py
index 4caa7f7..a667441 100644
--- a/repos/network/create.py
+++ b/repos/network/create.py
@@ -89,22 +89,23 @@ def create(params):
     logger.info("original network active number: %s" % net_num1)
 
     try:
-        netobj.create(netxml)
-        net_num2 = netobj.get_number()
-        if  not check_network_status(networkname, netobj, logger) and \
-                net_num2 > net_num1:
-            logger.info("current network active number: %s\n" % net_num2)
-            test_result = True
-        else:
-            logger.error("the %s network is inactive" % networkname)
-            logger.error("fail to create network from :\n%s" % netxml)
+        try:
+            netobj.create(netxml)
+            net_num2 = netobj.get_number()
+            if  not check_network_status(networkname, netobj, logger) and \
+                    net_num2 > net_num1:
+                logger.info("current network active number: %s\n" % net_num2)
+                test_result = True
+            else:
+                logger.error("the %s network is inactive" % networkname)
+                logger.error("fail to create network from :\n%s" % netxml)
+                test_result = False
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("create a network from xml: \n%s" % netxml)
             test_result = False
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("create a network from xml: \n%s" % netxml)
-        test_result = False
-        return 1
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/define.py b/repos/network/define.py
index b96c599..dda8d06 100644
--- a/repos/network/define.py
+++ b/repos/network/define.py
@@ -97,22 +97,23 @@ def define(params):
     logger.info("original network define number: %s" % net_num1)
 
     try:
-        netobj.define(netxml)
-        net_num2 = netobj.get_define_number()
-        if check_network_define(networkname, logger) and net_num2 > net_num1:
-            logger.info("current network define number: %s" % net_num2)
-            logger.info("define %s network is successful" % networkname)
-            test_result = True
-        else:
-            logger.error("%s network is undefined" % networkname)
+        try:
+            netobj.define(netxml)
+            net_num2 = netobj.get_define_number()
+            if check_network_define(networkname, logger) and net_num2 > net_num1:
+                logger.info("current network define number: %s" % net_num2)
+                logger.info("define %s network is successful" % networkname)
+                test_result = True
+            else:
+                logger.error("%s network is undefined" % networkname)
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("define a network from xml: \n%s" % netxml)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("define a network from xml: \n%s" % netxml)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/destroy.py b/repos/network/destroy.py
index 5b31bf0..51663ac 100644
--- a/repos/network/destroy.py
+++ b/repos/network/destroy.py
@@ -86,23 +86,24 @@ def destroy(params):
     logger.info("original network active number: %s" % net_num1)
 
     try:
-        netobj.destroy(networkname)
-        net_num2 = netobj.get_number()
-        if not check_network_status(networkname, netobj, logger) and \
-            net_num1 > net_num2:
-            logger.info("current network active number: %s\n" % net_num2)
-            logger.info("destroy %s network successful" % networkname)
-            test_result = True
-        else:
-            logger.error("the %s network is still running" % networkname)
+        try:
+            netobj.destroy(networkname)
+            net_num2 = netobj.get_number()
+            if not check_network_status(networkname, netobj, logger) and \
+                net_num1 > net_num2:
+                logger.info("current network active number: %s\n" % net_num2)
+                logger.info("destroy %s network successful" % networkname)
+                test_result = True
+            else:
+                logger.error("the %s network is still running" % networkname)
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to destroy %s network" % networkname)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to destroy %s network" % networkname)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/network_name.py b/repos/network/network_name.py
index d4e9c04..5b78dec 100644
--- a/repos/network/network_name.py
+++ b/repos/network/network_name.py
@@ -86,19 +86,20 @@ def netname(params):
         return 1
 
     try:
-        UUIDString = netobj.get_uuid_string(networkname)
-        logger.info("the UUID string of network %s is %s" % (networkname, UUIDString))
-
-        if check_network_uuid(networkname, UUIDString, logger):
-            logger.info(VIRSH_NETNAME + " test succeeded.")
-            return 0
-        else:
-            logger.error(VIRSH_NETNAME + " test failed.")
+        try:
+            UUIDString = netobj.get_uuid_string(networkname)
+            logger.info("the UUID string of network %s is %s" % (networkname, UUIDString))
+
+            if check_network_uuid(networkname, UUIDString, logger):
+                logger.info(VIRSH_NETNAME + " test succeeded.")
+                return 0
+            else:
+                logger.error(VIRSH_NETNAME + " test failed.")
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/network_uuid.py b/repos/network/network_uuid.py
index 266d893..be30fd2 100644
--- a/repos/network/network_uuid.py
+++ b/repos/network/network_uuid.py
@@ -86,19 +86,20 @@ def netuuid(params):
         return 1
 
     try:
-        UUIDString = netobj.get_uuid_string(networkname)
-        logger.info("the UUID string of network %s is %s" % (networkname, UUIDString))
-
-        if check_network_uuid(networkname, UUIDString, logger):
-            logger.info(VIRSH_NETUUID + " test succeeded.")
-            return 0
-        else:
-            logger.error(VIRSH_NETUUID + " test failed.")
+        try:
+            UUIDString = netobj.get_uuid_string(networkname)
+            logger.info("the UUID string of network %s is %s" % (networkname, UUIDString))
+
+            if check_network_uuid(networkname, UUIDString, logger):
+                logger.info(VIRSH_NETUUID + " test succeeded.")
+                return 0
+            else:
+                logger.error(VIRSH_NETUUID + " test failed.")
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/network/undefine.py b/repos/network/undefine.py
index ea14282..d7e903e 100644
--- a/repos/network/undefine.py
+++ b/repos/network/undefine.py
@@ -85,22 +85,23 @@ def undefine(params):
     logger.info("original network define number: %s" % net_num1)
 
     try:
-        netobj.undefine(networkname)
-        net_num2 = netobj.get_define_number()
-        if  check_network_undefine(networkname) and net_num2 < net_num1:
-            logger.info("current network define number: %s" % net_num2)
-            logger.info("undefine %s network is successful" % networkname)
-            test_result = True
-        else:
-            logger.error("the network %s is still define" % networkname)
+        try:
+            netobj.undefine(networkname)
+            net_num2 = netobj.get_define_number()
+            if  check_network_undefine(networkname) and net_num2 < net_num1:
+                logger.info("current network define number: %s" % net_num2)
+                logger.info("undefine %s network is successful" % networkname)
+                test_result = True
+            else:
+                logger.error("the network %s is still define" % networkname)
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("fail to undefine a network")
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("fail to undefine a network")
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/nodedevice/detach.py b/repos/nodedevice/detach.py
index 7304b7a..ac9aa89 100644
--- a/repos/nodedevice/detach.py
+++ b/repos/nodedevice/detach.py
@@ -119,24 +119,25 @@ def dettach(dicts):
     nodeobj = nodedevAPI.NodedevAPI(virconn)
 
     try:
-        logger.info("dettach the node device")
-        nodeobj.dettach(device_name)
-        current_driver = check_node_dettach(pciaddress)
-        logger.info("current device driver: %s" % current_driver)
-        if current_driver != original_driver and current_driver == pciback:
-            logger.info("the node %s device dettach is successful" \
-                        % device_name)
-            test_result = True
-        else:
-            logger.info("the node %s device dettach is failed" % device_name)
+        try:
+            logger.info("dettach the node device")
+            nodeobj.dettach(device_name)
+            current_driver = check_node_dettach(pciaddress)
+            logger.info("current device driver: %s" % current_driver)
+            if current_driver != original_driver and current_driver == pciback:
+                logger.info("the node %s device dettach is successful" \
+                            % device_name)
+                test_result = True
+            else:
+                logger.info("the node %s device dettach is failed" % device_name)
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to dettach %s node device" % device_name)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to dettach %s node device" % device_name)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/nodedevice/reattach.py b/repos/nodedevice/reattach.py
index 4943fc2..8eafb1d 100644
--- a/repos/nodedevice/reattach.py
+++ b/repos/nodedevice/reattach.py
@@ -118,24 +118,25 @@ def reattach(dicts):
     nodeobj = nodedevAPI.NodedevAPI(virconn)
 
     try:
-        nodeobj.reattach(device_name)
-        logger.info("reattach the node device")
-        current_driver = check_node_reattach(pciaddress)
-        logger.info("current device driver: %s" % current_driver)
-        if original_driver == pciback and current_driver != pciback:
-            logger.info("the node %s device reattach is successful" \
-                        % device_name)
-            test_result = True
-        else:
-            logger.info("the node %s device reattach is failed" % device_name)
+        try:
+            nodeobj.reattach(device_name)
+            logger.info("reattach the node device")
+            current_driver = check_node_reattach(pciaddress)
+            logger.info("current device driver: %s" % current_driver)
+            if original_driver == pciback and current_driver != pciback:
+                logger.info("the node %s device reattach is successful" \
+                            % device_name)
+                test_result = True
+            else:
+                logger.info("the node %s device reattach is failed" % device_name)
+                test_result = False
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to reattach %s node device" % device_name)
             test_result = False
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to reattach %s node device" % device_name)
-        test_result = False
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/nodedevice/reset.py b/repos/nodedevice/reset.py
index 7b85d70..40ba95b 100644
--- a/repos/nodedevice/reset.py
+++ b/repos/nodedevice/reset.py
@@ -87,16 +87,17 @@ def reset(dicts):
     nodeobj = nodedevAPI.NodedevAPI(virconn)
 
     try:
-        nodeobj.reset(device_name)
-        logger.info("reset the node device")
-        logger.info("the node %s device reset is successful" % device_name)
-        test_result = True
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to reset %s node device" % device_name)
-        test_result = False
-        return 1
+        try:
+            nodeobj.reset(device_name)
+            logger.info("reset the node device")
+            logger.info("the node %s device reset is successful" % device_name)
+            test_result = True
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to reset %s node device" % device_name)
+            test_result = False
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/npiv/create_virtual_hba.py b/repos/npiv/create_virtual_hba.py
index 3bc6b5b..e86b85a 100644
--- a/repos/npiv/create_virtual_hba.py
+++ b/repos/npiv/create_virtual_hba.py
@@ -117,24 +117,25 @@ def create_virtual_hba(params):
     logger.debug("node device xml:\n%s" % nodedev_xml)
 
     try:
-        logger.info("creating a virtual HBA ...")
-        nodedev_obj = nodedev.create(nodedev_xml)
-        dev_name = nodedev.get_name(nodedev_obj)
-
-        if check_nodedev_create(wwpn, dev_name) and \
-            check_nodedev_parent(nodedev, params['parent'], dev_name):
-            logger.info("the virtual HBA '%s' was created successfully" \
-                        % dev_name)
-            return 0
-        else:
-            logger.error("fail to create the virtual HBA '%s'" \
-                         % dev_name)
+        try:
+            logger.info("creating a virtual HBA ...")
+            nodedev_obj = nodedev.create(nodedev_xml)
+            dev_name = nodedev.get_name(nodedev_obj)
+
+            if check_nodedev_create(wwpn, dev_name) and \
+                check_nodedev_parent(nodedev, params['parent'], dev_name):
+                logger.info("the virtual HBA '%s' was created successfully" \
+                            % dev_name)
+                return 0
+            else:
+                logger.error("fail to create the virtual HBA '%s'" \
+                             % dev_name)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            logger.error("Error: fail to create %s virtual hba" % dev_name)
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        logger.error("Error: fail to create %s virtual hba" % dev_name)
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/snapshot/delete.py b/repos/snapshot/delete.py
index 88540c8..8a7eef6 100644
--- a/repos/snapshot/delete.py
+++ b/repos/snapshot/delete.py
@@ -105,18 +105,19 @@ def delete(params):
         return 1
 
     try:
-        logger.info("delete a snapshot for %s" % guestname)
-        snap_obj.delete(guestname, snapshotname)
-        if not delete_check(guestname, snapshotname, "noexist", logger):
-            logger.error("after deleting, the corresponding \
-                         xmlfile still exists in %s" % SNAPSHOT_DIR)
+        try:
+            logger.info("delete a snapshot for %s" % guestname)
+            snap_obj.delete(guestname, snapshotname)
+            if not delete_check(guestname, snapshotname, "noexist", logger):
+                logger.error("after deleting, the corresponding \
+                             xmlfile still exists in %s" % SNAPSHOT_DIR)
+                return 1
+            else:
+                logger.info("delete snapshot %s succeeded" % snapshotname)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                          (e.response()['message'], e.response()['code']))
             return 1
-        else:
-            logger.info("delete snapshot %s succeeded" % snapshotname)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-(e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/snapshot/internal_create.py b/repos/snapshot/internal_create.py
index a28eff6..123e38a 100644
--- a/repos/snapshot/internal_create.py
+++ b/repos/snapshot/internal_create.py
@@ -111,13 +111,14 @@ def internal_create(params):
     logger.debug("%s snapshot xml:\n%s" % (guestname, snapshot_xml))
 
     try:
-        logger.info("create a snapshot for %s" % guestname)
-        snap_obj.create(guestname, snapshot_xml)
-        logger.info("creating snapshot succeeded")
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-(e.response()['message'], e.response()['code']))
-        return 1
+        try:
+            logger.info("create a snapshot for %s" % guestname)
+            snap_obj.create(guestname, snapshot_xml)
+            logger.info("creating snapshot succeeded")
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                          (e.response()['message'], e.response()['code']))
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/snapshot/revert.py b/repos/snapshot/revert.py
index 4c86bb4..f70e5dc 100644
--- a/repos/snapshot/revert.py
+++ b/repos/snapshot/revert.py
@@ -81,13 +81,14 @@ def revert(params):
         return 1
 
     try:
-        logger.info("revert a snapshot for %s" % guestname)
-        snap_obj.revertToSnapshot(guestname, snapshotname)
-        logger.info("revert snapshot succeeded")
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-(e.response()['message'], e.response()['code']))
-        return 1
+        try:
+            logger.info("revert a snapshot for %s" % guestname)
+            snap_obj.revertToSnapshot(guestname, snapshotname)
+            logger.info("revert snapshot succeeded")
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                          (e.response()['message'], e.response()['code']))
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/activate_pool.py b/repos/storage/activate_pool.py
index 9dab7ee..2b27be6 100644
--- a/repos/storage/activate_pool.py
+++ b/repos/storage/activate_pool.py
@@ -101,18 +101,19 @@ def activate_pool(params):
         logger.info("closed hypervisor connection")
         return 1
     try:
-        stgobj.active_pool(poolname)
-        time.sleep(5)
-        if check_pool_active(stgobj, poolname, logger):
-            logger.info("activating %s storage pool is SUCCESSFUL!!!" % poolname)
-            return 0
-        else:
-            logger.info("activating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+        try:
+            stgobj.active_pool(poolname)
+            time.sleep(5)
+            if check_pool_active(stgobj, poolname, logger):
+                logger.info("activating %s storage pool is SUCCESSFUL!!!" % poolname)
+                return 0
+            else:
+                logger.info("activating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/build_dir_pool.py b/repos/storage/build_dir_pool.py
index d447a5b..5765b36 100644
--- a/repos/storage/build_dir_pool.py
+++ b/repos/storage/build_dir_pool.py
@@ -115,20 +115,21 @@ def build_dir_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("build %s storage pool" % poolname)
-        stgobj.build_pool(poolname)
-        display_pool_info(stgobj)
-
-        if check_build_pool(path_value):
-            logger.info("build %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("fail to build %s storage pool" % poolname)
+        try:
+            logger.info("build %s storage pool" % poolname)
+            stgobj.build_pool(poolname)
+            display_pool_info(stgobj)
+
+            if check_build_pool(path_value):
+                logger.info("build %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("fail to build %s storage pool" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/build_disk_pool.py b/repos/storage/build_disk_pool.py
index c5311cb..be36ea8 100644
--- a/repos/storage/build_disk_pool.py
+++ b/repos/storage/build_disk_pool.py
@@ -141,20 +141,21 @@ def build_disk_pool(params):
                  (source_device, device_type))
 
     try:
-        logger.info("begin to build the storage pool")
-        stgobj.build_pool(poolname)
-        time.sleep(5)
-        if not check_pool_built(source_device, device_type):
-            logger.info("building %s storage pool is SUCCESSFUL!!!" % poolname)
-            return 0
-        else:
-            logger.info("building %s storage pool is UNSUCCESSFUL!!!" % \
-                         poolname)
+        try:
+            logger.info("begin to build the storage pool")
+            stgobj.build_pool(poolname)
+            time.sleep(5)
+            if not check_pool_built(source_device, device_type):
+                logger.info("building %s storage pool is SUCCESSFUL!!!" % poolname)
+                return 0
+            else:
+                logger.info("building %s storage pool is UNSUCCESSFUL!!!" % \
+                             poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/build_logical_pool.py b/repos/storage/build_logical_pool.py
index cc9ccae..f761fd1 100644
--- a/repos/storage/build_logical_pool.py
+++ b/repos/storage/build_logical_pool.py
@@ -120,21 +120,22 @@ def build_logical_pool(params):
     display_physical_volume()
 
     try:
-        logger.info("build %s storage pool" % poolname)
-        stgobj.build_pool(poolname)
-        display_pool_info(stgobj)
-        display_physical_volume()
-
-        if check_build_pool(poolname):
-            logger.info("build %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("fail to build %s storage pool" % poolname)
+        try:
+            logger.info("build %s storage pool" % poolname)
+            stgobj.build_pool(poolname)
+            display_pool_info(stgobj)
+            display_physical_volume()
+
+            if check_build_pool(poolname):
+                logger.info("build %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("fail to build %s storage pool" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/build_netfs_pool.py b/repos/storage/build_netfs_pool.py
index 4d0b191..d0012ff 100644
--- a/repos/storage/build_netfs_pool.py
+++ b/repos/storage/build_netfs_pool.py
@@ -114,20 +114,21 @@ def build_netfs_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("build %s storage pool" % poolname)
-        stgobj.build_pool(poolname)
-        display_pool_info(stgobj)
-
-        if check_build_pool(path_value):
-            logger.info("build %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("fail to build %s storage pool" % poolname)
+        try:
+            logger.info("build %s storage pool" % poolname)
+            stgobj.build_pool(poolname)
+            display_pool_info(stgobj)
+
+            if check_build_pool(path_value):
+                logger.info("build %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("fail to build %s storage pool" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_dir_pool.py b/repos/storage/create_dir_pool.py
index 9f7e36c..d497fdb 100644
--- a/repos/storage/create_dir_pool.py
+++ b/repos/storage/create_dir_pool.py
@@ -109,19 +109,20 @@ def create_dir_pool(params):
     logger.debug("storage pool xml:\n%s" % poolxml)
 
     try:
-        logger.info("Creating %s storage pool" % poolname)
-        stgobj.create_pool(poolxml)
-        display_pool_info(stgobj, logger)
-        if check_pool_create(stgobj, poolname, logger):
-            logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
-            return 0
-        else:
-            logger.info("aa creating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+        try:
+            logger.info("Creating %s storage pool" % poolname)
+            stgobj.create_pool(poolxml)
+            display_pool_info(stgobj, logger)
+            if check_pool_create(stgobj, poolname, logger):
+                logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
+                return 0
+            else:
+                logger.info("aa creating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_dir_volume.py b/repos/storage/create_dir_volume.py
index e5e5cd7..6022e7b 100644
--- a/repos/storage/create_dir_volume.py
+++ b/repos/storage/create_dir_volume.py
@@ -174,12 +174,13 @@ def create_dir_volume(params):
     logger.debug("volume xml:\n%s" % volumexml)
 
     try:
-        logger.info("create %s volume" % volname)
-        stgobj.create_volume(poolname, volumexml)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
+        try:
+            logger.info("create %s volume" % volname)
+            stgobj.create_volume(poolname, volumexml)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_fs_pool.py b/repos/storage/create_fs_pool.py
index 4338cad..887b91d 100644
--- a/repos/storage/create_fs_pool.py
+++ b/repos/storage/create_fs_pool.py
@@ -136,26 +136,27 @@ def create_fs_pool(params):
     logger.debug("storage pool xml:\n%s" % poolxml)
 
     try:
-        logger.info("Creating %s storage pool" % poolname)
-        stgobj.create_pool(poolxml)
-        display_pool_info(stgobj, logger)
-        if check_pool_create_libvirt(stgobj, poolname, logger):
-            logger.info("creating %s storage pool is in libvirt" % poolname)
-            if check_pool_create_OS(stgobj, poolname, logger):
-                logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
-                return 0
+        try:
+            logger.info("Creating %s storage pool" % poolname)
+            stgobj.create_pool(poolxml)
+            display_pool_info(stgobj, logger)
+            if check_pool_create_libvirt(stgobj, poolname, logger):
+                logger.info("creating %s storage pool is in libvirt" % poolname)
+                if check_pool_create_OS(stgobj, poolname, logger):
+                    logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
+                    return 0
+                else:
+                    logger.info("creating %s storage pool is UNSUCCESSFUL!!!" % \
+                                 poolname)
+                    return 1
             else:
-                logger.info("creating %s storage pool is UNSUCCESSFUL!!!" % \
-                             poolname)
+                logger.info("creating %s storage pool is \
+                             UNSUCCESSFUL in libvirt!!!" % poolname)
                 return 1
-        else:
-            logger.info("creating %s storage pool is \
-                         UNSUCCESSFUL in libvirt!!!" % poolname)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_iscsi_pool.py b/repos/storage/create_iscsi_pool.py
index 11e345a..d642ddd 100644
--- a/repos/storage/create_iscsi_pool.py
+++ b/repos/storage/create_iscsi_pool.py
@@ -116,19 +116,20 @@ def create_iscsi_pool(params):
     logger.debug("storage pool xml:\n%s" % poolxml)
 
     try:
-        logger.info("Creating %s storage pool" % poolname)
-        stgobj.create_pool(poolxml)
-        display_pool_info(stgobj,logger)
-        if check_pool_create(stgobj, poolname,logger):
-            logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
-            return 0
-        else:
-            logger.info("creating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+        try:
+            logger.info("Creating %s storage pool" % poolname)
+            stgobj.create_pool(poolxml)
+            display_pool_info(stgobj,logger)
+            if check_pool_create(stgobj, poolname,logger):
+                logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
+                return 0
+            else:
+                logger.info("creating %s storage pool is UNSUCCESSFUL!!!" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_logical_volume.py b/repos/storage/create_logical_volume.py
index 43fdc42..e41bede 100644
--- a/repos/storage/create_logical_volume.py
+++ b/repos/storage/create_logical_volume.py
@@ -163,22 +163,23 @@ def create_logical_volume(params):
     display_physical_volume()
 
     try:
-        logger.info("create %s storage volume" % volname)
-        stgobj.create_volume(poolname, volxml)
-        display_physical_volume()
-        vol_num2 = get_storage_volume_number(stgobj, poolname)
-        display_volume_info(stgobj, poolname)
-        if check_volume_create(stgobj, poolname, volname, caps_kbyte) \
-            and vol_num2 > vol_num1:
-            logger.info("create %s storage volume is successful" % volname)
-            return 0
-        else:
-            logger.error("fail to crearte %s storage volume" % volname)
+        try:
+            logger.info("create %s storage volume" % volname)
+            stgobj.create_volume(poolname, volxml)
+            display_physical_volume()
+            vol_num2 = get_storage_volume_number(stgobj, poolname)
+            display_volume_info(stgobj, poolname)
+            if check_volume_create(stgobj, poolname, volname, caps_kbyte) \
+                and vol_num2 > vol_num1:
+                logger.info("create %s storage volume is successful" % volname)
+                return 0
+            else:
+                logger.error("fail to crearte %s storage volume" % volname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_netfs_pool.py b/repos/storage/create_netfs_pool.py
index abe50f1..8ea781b 100644
--- a/repos/storage/create_netfs_pool.py
+++ b/repos/storage/create_netfs_pool.py
@@ -139,27 +139,28 @@ def create_netfs_pool(params):
     logger.debug("storage pool xml:\n%s" % poolxml)
 
     try:
-        logger.info("Creating %s storage pool" % poolname)
-        stgobj.create_pool(poolxml)
-        display_pool_info(stgobj, logger)
-        if check_pool_create_libvirt(stgobj, poolname, logger):
-            logger.info("creating %s storage pool is \
-                         successful in libvirt" % poolname)
-            if check_pool_create_OS(stgobj, poolname, logger):
-                logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
-                return 0
+        try:
+            logger.info("Creating %s storage pool" % poolname)
+            stgobj.create_pool(poolxml)
+            display_pool_info(stgobj, logger)
+            if check_pool_create_libvirt(stgobj, poolname, logger):
+                logger.info("creating %s storage pool is \
+                             successful in libvirt" % poolname)
+                if check_pool_create_OS(stgobj, poolname, logger):
+                    logger.info("creating %s storage pool is SUCCESSFUL!!!" % poolname)
+                    return 0
+                else:
+                    logger.info("creating %s storage pool is \
+                                 UNSUCCESSFUL!!!" % poolname)
+                    return 1
             else:
                 logger.info("creating %s storage pool is \
-                             UNSUCCESSFUL!!!" % poolname)
+                             UNSUCCESSFUL in libvirt!!!" % poolname)
                 return 1
-        else:
-            logger.info("creating %s storage pool is \
-                         UNSUCCESSFUL in libvirt!!!" % poolname)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/create_netfs_volume.py b/repos/storage/create_netfs_volume.py
index a62fd4d..65d1215 100644
--- a/repos/storage/create_netfs_volume.py
+++ b/repos/storage/create_netfs_volume.py
@@ -172,12 +172,13 @@ def create_netfs_volume(params):
     logger.debug("volume xml:\n%s" % volumexml)
 
     try:
-        logger.info("create %s volume" % volname)
-        stgobj.create_volume(poolname, volumexml)
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
+        try:
+            logger.info("create %s volume" % volname)
+            stgobj.create_volume(poolname, volumexml)
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
+            return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_dir_pool.py b/repos/storage/define_dir_pool.py
index 757666f..03b15b7 100644
--- a/repos/storage/define_dir_pool.py
+++ b/repos/storage/define_dir_pool.py
@@ -35,7 +35,7 @@ from exception import LibvirtAPI
 
 VIRSH_POOLLIST = "virsh --quiet pool-list --all|awk '{print $1}'|grep \"^%s$\""
 POOL_STAT = "virsh --quiet pool-list --all|grep \"^%s\\b\" |grep \"inactive\""
-POOL_DESTROY = "virsh pool-destroy %s" 
+POOL_DESTROY = "virsh pool-destroy %s"
 POOL_UNDEFINE = "virsh pool-undefine %s"
 
 def usage(params):
@@ -110,21 +110,22 @@ def define_dir_pool(params):
     display_pool_info(stgobj, logger)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj, logger)
-        if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
-            logger.info("define %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool is undefined" % poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj, logger)
+            if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
+                logger.info("define %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool is undefined" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
@@ -133,7 +134,7 @@ def define_dir_pool(params):
 
 def define_dir_pool_clean(params):
     logger = params['logger']
-    poolname = params['poolname'] 
+    poolname = params['poolname']
     (status, output) = commands.getstatusoutput(VIRSH_POOLLIST % poolname)
     if status:
         pass
@@ -146,7 +147,7 @@ def define_dir_pool_clean(params):
                logger.error("failed to destroy storage pool %s" % poolname)
                logger.error("%s" % output)
            else:
-               (status, output) = commands.getstatusoutput(POOL_UNDEFINE % poolname)   
+               (status, output) = commands.getstatusoutput(POOL_UNDEFINE % poolname)
                if status:
                    logger.error("failed to undefine storage pool %s" % poolname)
                    logger.error("%s" % output)
@@ -156,5 +157,5 @@ def define_dir_pool_clean(params):
                 logger.error("failed to undefine storage pool %s" % poolname)
                 logger.error("%s" % output)
 
-                       
+
 
diff --git a/repos/storage/define_disk_pool.py b/repos/storage/define_disk_pool.py
index 85b6e7b..4b47814 100644
--- a/repos/storage/define_disk_pool.py
+++ b/repos/storage/define_disk_pool.py
@@ -125,22 +125,23 @@ def define_disk_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj)
-        if check_pool_define(poolname) and pool_num2 > pool_num1:
-            logger.info("It is successful to define %s storage pool" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool was not defined successfully" % \
-                          poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj)
+            if check_pool_define(poolname) and pool_num2 > pool_num1:
+                logger.info("It is successful to define %s storage pool" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool was not defined successfully" % \
+                              poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_iscsi_pool.py b/repos/storage/define_iscsi_pool.py
index 2066d19..5711159 100644
--- a/repos/storage/define_iscsi_pool.py
+++ b/repos/storage/define_iscsi_pool.py
@@ -123,21 +123,22 @@ def define_iscsi_pool(params):
     display_pool_info(stgobj, logger)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj, logger)
-        if check_pool_define(stgobj, poolname, logger) and pool_num2 > pool_num1:
-            logger.info("define %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool is undefined" % poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj, logger)
+            if check_pool_define(stgobj, poolname, logger) and pool_num2 > pool_num1:
+                logger.info("define %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool is undefined" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_logical_pool.py b/repos/storage/define_logical_pool.py
index d97021d..71dbdeb 100644
--- a/repos/storage/define_logical_pool.py
+++ b/repos/storage/define_logical_pool.py
@@ -101,21 +101,22 @@ def define_logical_pool(params):
     display_pool_info(stgobj, logger)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj, logger)
-        if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
-            logger.info("define %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool is undefined" % poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj, logger)
+            if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
+                logger.info("define %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool is undefined" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_mpath_pool.py b/repos/storage/define_mpath_pool.py
index 1a1f8fe..89db5ef 100644
--- a/repos/storage/define_mpath_pool.py
+++ b/repos/storage/define_mpath_pool.py
@@ -119,22 +119,23 @@ def define_mpath_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj)
-        if check_pool_define(poolname) and pool_num2 > pool_num1:
-            logger.info("It is successful to define %s storage pool" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool was not defined successfully" % \
-                          poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj)
+            if check_pool_define(poolname) and pool_num2 > pool_num1:
+                logger.info("It is successful to define %s storage pool" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool was not defined successfully" % \
+                              poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_netfs_pool.py b/repos/storage/define_netfs_pool.py
index 17988b7..68d7c86 100644
--- a/repos/storage/define_netfs_pool.py
+++ b/repos/storage/define_netfs_pool.py
@@ -102,21 +102,22 @@ def define_netfs_pool(params):
     display_pool_info(stgobj, logger)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj, logger)
-        if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
-            logger.info("define %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool is undefined" % poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj, logger)
+            if check_pool_define(poolname, logger) and pool_num2 > pool_num1:
+                logger.info("define %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool is undefined" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/define_scsi_pool.py b/repos/storage/define_scsi_pool.py
index b49f412..a5193e2 100644
--- a/repos/storage/define_scsi_pool.py
+++ b/repos/storage/define_scsi_pool.py
@@ -123,22 +123,23 @@ def define_scsi_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("define %s storage pool" % poolname)
-        stgobj.define_pool(poolxml)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj)
-        if check_pool_define(poolname) and pool_num2 > pool_num1:
-            logger.info("It is successful to define %s storage pool" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool was not defined successfully" % \
-                          poolname)
+        try:
+            logger.info("define %s storage pool" % poolname)
+            stgobj.define_pool(poolxml)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj)
+            if check_pool_define(poolname) and pool_num2 > pool_num1:
+                logger.info("It is successful to define %s storage pool" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool was not defined successfully" % \
+                              poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/delete_dir_volume.py b/repos/storage/delete_dir_volume.py
index 87cedc5..7e6c714 100644
--- a/repos/storage/delete_dir_volume.py
+++ b/repos/storage/delete_dir_volume.py
@@ -118,20 +118,21 @@ def delete_dir_volume(params):
     display_volume_info(stgobj, poolname)
 
     try:
-        logger.info("delete %s storage volume" % volname)
-        stgobj.delete_volume(poolname, volname)
-        vol_num2 = get_storage_volume_number(stgobj, poolname)
-        display_volume_info(stgobj, poolname)
-        if check_volume_delete(volkey) and vol_num1 > vol_num2:
-            logger.info("delete %s storage volume is successful" % volname)
-            return 0
-        else:
-            logger.error("%s storage volume is undeleted" % volname)
+        try:
+            logger.info("delete %s storage volume" % volname)
+            stgobj.delete_volume(poolname, volname)
+            vol_num2 = get_storage_volume_number(stgobj, poolname)
+            display_volume_info(stgobj, poolname)
+            if check_volume_delete(volkey) and vol_num1 > vol_num2:
+                logger.info("delete %s storage volume is successful" % volname)
+                return 0
+            else:
+                logger.error("%s storage volume is undeleted" % volname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/delete_logical_pool.py b/repos/storage/delete_logical_pool.py
index 11f2130..c880aa3 100644
--- a/repos/storage/delete_logical_pool.py
+++ b/repos/storage/delete_logical_pool.py
@@ -115,21 +115,22 @@ def delete_logical_pool(params):
     display_physical_volume()
 
     try:
-        logger.info("delete %s storage pool" % poolname)
-        stgobj.delete_pool(poolname)
-        display_pool_info(stgobj)
-        display_physical_volume()
-
-        if check_delete_pool(poolname):
-            logger.info("delete %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("fail to delete %s storage pool" % poolname)
+        try:
+            logger.info("delete %s storage pool" % poolname)
+            stgobj.delete_pool(poolname)
+            display_pool_info(stgobj)
+            display_physical_volume()
+
+            if check_delete_pool(poolname):
+                logger.info("delete %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("fail to delete %s storage pool" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/delete_logical_volume.py b/repos/storage/delete_logical_volume.py
index 528d4e6..3dc7036 100644
--- a/repos/storage/delete_logical_volume.py
+++ b/repos/storage/delete_logical_volume.py
@@ -136,22 +136,23 @@ def delete_logical_volume(params):
     display_volume_info(stgobj, poolname)
     display_physical_volume()
     try:
-        logger.info("delete %s storage volume" % volname)
-        stgobj.delete_volume(poolname, volname)
-        vol_num2 = get_storage_volume_number(stgobj, poolname)
-        display_volume_info(stgobj, poolname)
-        display_physical_volume()
-
-        if vol_num1 > vol_num2 and check_volume_delete(poolname, volkey):
-            logger.info("delete %s storage volume is successful" % volname)
-            return 0
-        else:
-            logger.error("fail to delete %s storage volume" % volname)
+        try:
+            logger.info("delete %s storage volume" % volname)
+            stgobj.delete_volume(poolname, volname)
+            vol_num2 = get_storage_volume_number(stgobj, poolname)
+            display_volume_info(stgobj, poolname)
+            display_physical_volume()
+
+            if vol_num1 > vol_num2 and check_volume_delete(poolname, volkey):
+                logger.info("delete %s storage volume is successful" % volname)
+                return 0
+            else:
+                logger.error("fail to delete %s storage volume" % volname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/delete_netfs_volume.py b/repos/storage/delete_netfs_volume.py
index 69a5616..e719087 100644
--- a/repos/storage/delete_netfs_volume.py
+++ b/repos/storage/delete_netfs_volume.py
@@ -118,20 +118,21 @@ def delete_netfs_volume(params):
     display_volume_info(stgobj, poolname)
 
     try:
-        logger.info("delete %s storage volume" % volname)
-        stgobj.delete_volume(poolname, volname)
-        vol_num2 = get_storage_volume_number(stgobj, poolname)
-        display_volume_info(stgobj, poolname)
-        if check_volume_delete(volkey) and vol_num1 > vol_num2:
-            logger.info("delete %s storage volume is successful" % volname)
-            return 0
-        else:
-            logger.error("%s storage volume is undeleted" % volname)
+        try:
+            logger.info("delete %s storage volume" % volname)
+            stgobj.delete_volume(poolname, volname)
+            vol_num2 = get_storage_volume_number(stgobj, poolname)
+            display_volume_info(stgobj, poolname)
+            if check_volume_delete(volkey) and vol_num1 > vol_num2:
+                logger.info("delete %s storage volume is successful" % volname)
+                return 0
+            else:
+                logger.error("%s storage volume is undeleted" % volname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/pool_name.py b/repos/storage/pool_name.py
index a91ea5a..15329c4 100644
--- a/repos/storage/pool_name.py
+++ b/repos/storage/pool_name.py
@@ -87,18 +87,19 @@ def pool_name(params):
         return 1
 
     try:
-        UUIDString = stgobj.get_pool_uuidstring(poolname)
-        logger.info("the UUID string of pool %s is %s" % (poolname, UUIDString))
-        if check_pool_uuid(poolname, UUIDString, logger):
-            logger.info(VIRSH_POOLNAME + " test succeeded.")
-            return 0
-        else:
-            logger.error(VIRSH_POOLNAME + " test failed.")
+        try:
+            UUIDString = stgobj.get_pool_uuidstring(poolname)
+            logger.info("the UUID string of pool %s is %s" % (poolname, UUIDString))
+            if check_pool_uuid(poolname, UUIDString, logger):
+                logger.info(VIRSH_POOLNAME + " test succeeded.")
+                return 0
+            else:
+                logger.error(VIRSH_POOLNAME + " test failed.")
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/pool_uuid.py b/repos/storage/pool_uuid.py
index 8bba936..ba92466 100644
--- a/repos/storage/pool_uuid.py
+++ b/repos/storage/pool_uuid.py
@@ -87,18 +87,19 @@ def pool_uuid(params):
         return 1
 
     try:
-        UUIDString = stgobj.get_pool_uuidstring(poolname)
-        logger.info("the UUID string of pool %s is %s" % (poolname, UUIDString))
-        if check_pool_uuid(poolname, UUIDString, logger):
-            logger.info(VIRSH_POOLUUID + " test succeeded.")
-            return 0
-        else:
-            logger.error(VIRSH_POOLUUID + " test failed.")
+        try:
+            UUIDString = stgobj.get_pool_uuidstring(poolname)
+            logger.info("the UUID string of pool %s is %s" % (poolname, UUIDString))
+            if check_pool_uuid(poolname, UUIDString, logger):
+                logger.info(VIRSH_POOLUUID + " test succeeded.")
+                return 0
+            else:
+                logger.error(VIRSH_POOLUUID + " test failed.")
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" % \
+                         (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" % \
-                     (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
diff --git a/repos/storage/undefine_pool.py b/repos/storage/undefine_pool.py
index 8cf9e46..8246926 100644
--- a/repos/storage/undefine_pool.py
+++ b/repos/storage/undefine_pool.py
@@ -108,21 +108,22 @@ def undefine_pool(params):
     display_pool_info(stgobj)
 
     try:
-        logger.info("undefine %s storage pool" % poolname)
-        stgobj.undefine_pool(poolname)
-        pool_num2 = stgobj.get_number_of_defpools()
-        logger.info("current storage pool define number: %s" % pool_num2)
-        display_pool_info(stgobj)
-        if check_pool_undefine(poolname) and pool_num2 < pool_num1:
-            logger.info("undefine %s storage pool is successful" % poolname)
-            return 0
-        else:
-            logger.error("%s storage pool is undefined" % poolname)
+        try:
+            logger.info("undefine %s storage pool" % poolname)
+            stgobj.undefine_pool(poolname)
+            pool_num2 = stgobj.get_number_of_defpools()
+            logger.info("current storage pool define number: %s" % pool_num2)
+            display_pool_info(stgobj)
+            if check_pool_undefine(poolname) and pool_num2 < pool_num1:
+                logger.info("undefine %s storage pool is successful" % poolname)
+                return 0
+            else:
+                logger.error("%s storage pool is undefined" % poolname)
+                return 1
+        except LibvirtAPI, e:
+            logger.error("API error message: %s, error code is %s" \
+                         % (e.response()['message'], e.response()['code']))
             return 1
-    except LibvirtAPI, e:
-        logger.error("API error message: %s, error code is %s" \
-                     % (e.response()['message'], e.response()['code']))
-        return 1
     finally:
         conn.close()
         logger.info("closed hypervisor connection")
-- 
1.7.1

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list


[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]