Assuming a hypervisor that supports multiple smartcard devices in the
guest, this would be a valid XML description:
<devices>
<smartcard mode='host'/>
<smartcard mode='host-certificates'>
<certificate>/path/to/cert1</certificate>
<certificate>/path/to/cert2</certificate>
<certificate>/path/to/cert3</certificate>
</smartcard>
<smartcard mode='passthrough' type='tcp'>
<source mode='connect' host='127.0.0.1' service='2001'/>
<protocol type='raw'/>
</smartcard>
</devices>
* docs/formatdomain.html.in (Smartcard devices): New section.
* docs/schemas/domain.rng (smartcard): New define, used in
devices.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml: New file
to test schema.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml:
Likewise.
Notes:
v2: incoporate feedback from RFC, make passthrough type default to tcp
v3: add optional <address> per <smartcard>, enhance <controller>
to understand ccid, add optional <database> in mode hosts-certificates,
optional <source> in mode hosts, add another test file, revert v2
passthrough mode back to requiring explicit type
---
docs/formatdomain.html.in | 95 +++++++++++++++++++-
docs/schemas/domain.rng | 73 +++++++++++++++
.../qemuxml2argv-smartcard-controller.xml | 20 ++++
.../qemuxml2argv-smartcard-host-certificates.xml | 20 ++++
.../qemuxml2argv-smartcard-host.xml | 16 ++++
.../qemuxml2argv-smartcard-passthrough-tcp.xml | 19 ++++
6 files changed, 242 insertions(+), 1 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index c15af9b..be014eb 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -891,7 +891,7 @@
<p>
Each controller has a mandatory attribute <code>type</code>,
- which must be one of "ide", "fdc", "scsi", "sata", or
+ which must be one of "ide", "fdc", "scsi", "sata", "ccid", or
"virtio-serial", and a mandatory attribute <code>index</code>
which is the decimal integer describing in which order the bus
controller is encountered (for use in <code>controller</code>
@@ -981,6 +981,99 @@
not used by qemu.</dd>
</dl>
+ <h4><a name="elementsSmartcard">Smartcard devices</a></h4>
+
+ <p>
+ A virtual smartcard device can be supplied to the guest via the
+ <code>smartcard</code> element. A USB smartcard reader device on
+ the host cannot be used on a guest with simple device
+ passthrough, since it will then not be available on the host,
+ possibly locking the host computer when it is "removed".
+ Therefore, some hypervisors provide a specialized virtual device
+ that can present a smartcard interface to the guest, with
+ several modes for describing how credentials are obtained from
+ the host or even a from a channel created to a third-party
+ smartcard provider. <span class="since">Since 0.8.8</span>
+ </p>
+
+<pre>
+ ...
+ <devices>
+ <smartcard mode='host'/>
+ <smartcard mode='host-certificates'>
+ <certificate>/path/to/cert1</certificate>
+ <certificate>/path/to/cert2</certificate>
+ <certificate>/path/to/cert3</certificate>
+ </smartcard>
+ <smartcard mode='passthrough' type='tcp'>
+ <source mode='connect' host='127.0.0.1' service='2001'/>
+ <protocol type='raw'/>
+ <address type='ccid' controller='0' slot='0'/>
+ </smartcard>
+ </devices>
+ ...
+</pre>
+
+ <p>
+ The <code><smartcard></code> element has a mandatory
+ attribute <code>mode</code>. The following modes are supported;
+ in each mode, the guest sees a device on its USB bus that
+ behaves like a physical USB CCID (Chip/Smart Card Interface
+ Device) card.
+ </p>
+
+ <dl>
+ <dt><code>mode='host'</code></dt>
+ <dd>The simplest operation, where the hypervisor relays all
+ requests from the guest into direct access to the host's
+ smartcard via NSS. No other attributes or sub-elements are
+ required. However, in cases where extra permissions must be
+ granted to the hypervisor to access the host's smartcard device,
+ an optional <code><source
+ dev='/path/to/smartcard'/></code> element is supported.
+ Also, see below about the use of an
+ optional <code><address></code> sub-element.</dd>
+
+ <dt><code>mode='host-certificates'</code></dt>
+ <dd>Rather than requiring a smartcard to be plugged into the
+ host, it is possible to provide three files residing on the host
+ and containing NSS certificates. These certificates can be
+ generated via the command <code>certutil -d /etc/pki/nssdb -x -t
+ CT,CT,CT -S -s CN=cert1 -n cert1</code>, and the resulting three
+ files must be supplied as the content of each of
+ three <code><certificate></code> sub-elements. An
+ additional sub-element <code><database></code> can specify
+ an additional file to use as the database.</dd>
+
+ <dt><code>mode='passthrough'</code></dt>
+ <dd>Rather than having the hypervisor directly communicate with
+ the host, it is possible to tunnel all requests through a
+ secondary character device to a third-party provider (which may
+ in turn be talking to a smartcard or using three certificate
+ files). In this mode of operation, an additional
+ attribute <code>type</code> is required, matching one of the
+ supported <a href="#elementsConsole">serial device</a> types, to
+ describe the host side of the tunnel; <code>type='tcp'</code> is
+ typical. Further sub-elements, such
+ as <code><source></code>, are required according to the
+ given type, although a <code><target></code> sub-element
+ is not required (since the consumer of the character device is
+ the hypervisor itself, rather than a device visible in the
+ guest).</dd>
+ </dl>
+
+ <p>
+ Each mode supports an optional
+ sub-element <code><address></code>, which fine-tunes the
+ correlation between the smartcard and a ccid bus controller.
+ If present, the element must have an attribute
+ of <code>type='ccid'</code> as well as a <code>bus</code>
+ attribute listing the index of the bus that the smartcard
+ utilizes. An optional <code>slot</code> attribute lists which
+ slot within the bus. For now, qemu only supports at most one
+ smartcard, with an address of bus=0 slot=0.
+ </p>
+
<h4><a name="elementsNICS">Network interfaces</a></h4>
<pre>
diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng
index e4e7423..2cbabeb 100644
--- a/docs/schemas/domain.rng
+++ b/docs/schemas/domain.rng
@@ -749,6 +749,7 @@
<value>ide</value>
<value>scsi</value>
<value>sata</value>
+ <value>ccid</value>
</choice>
</attribute>
</optional>
@@ -1632,6 +1633,58 @@
</interleave>
</element>
</define>
+ <define name="smartcard">
+ <element name="smartcard">
+ <choice>
+ <group>
+ <attribute name="mode">
+ <value>host</value>
+ </attribute>
+ <optional>
+ <element name="source">
+ <attribute name="dev">
+ <ref name="absFilePath"/>
+ </attribute>
+ <empty/>
+ </element>
+ </optional>
+ </group>
+ <group>
+ <attribute name="mode">
+ <value>host-certificates</value>
+ </attribute>
+ <ref name='certificate'/>
+ <ref name='certificate'/>
+ <ref name='certificate'/>
+ <optional>
+ <element name="database">
+ <ref name="absFilePath"/>
+ </element>
+ </optional>
+ </group>
+ <group>
+ <attribute name="mode">
+ <value>passthrough</value>
+ </attribute>
+ <ref name="qemucdevSrcType"/>
+ <interleave>
+ <ref name="qemucdevSrcDef"/>
+ <optional>
+ <ref name="qemucdevTgtDef"/>
+ </optional>
+ </interleave>
+ </group>
+ </choice>
+ <optional>
+ <ref name="address"/>
+ </optional>
+ </element>
+ </define>
+ <define name="certificate">
+ <element name="certificate">
+ <ref name="absFilePath"/>
+ </element>
+ </define>
<define name="input">
<element name="input">
<attribute name="type">
@@ -1765,8 +1818,21 @@
</attribute>
</optional>
</define>
+ <define name="ccidaddress">
+ <attribute name="controller">
+ <ref name="driveController"/>
+ </attribute>
+ <optional>
+ <attribute name="slot">
+ <ref name="driveUnit"/>
+ </attribute>
+ </optional>
+ </define>
<!--
Devices attached to a domain.
+ Sub-elements such as <alias> are not documented here, as they
+ can only exist when generated for a live domain and are ignored
+ when defining a domain.
-->
<define name="devices">
<element name="devices">
@@ -1789,6 +1855,7 @@
<ref name="parallel"/>
<ref name="serial"/>
<ref name="channel"/>
+ <ref name="smartcard"/>
</choice>
</zeroOrMore>
<optional>
@@ -2018,6 +2085,12 @@
</attribute>
<ref name="virtioserialaddress"/>
</group>
+ <group>
+ <attribute name="type">
+ <value>ccid</value>
+ </attribute>
+ <ref name="ccidaddress"/>
+ </group>
</choice>
</element>
</define>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml
new file mode 100644
index 0000000..84a0653
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml
@@ -0,0 +1,20 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory>219200</memory>
+ <currentMemory>219200</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <controller type='ccid' index='0'/>
+ <smartcard mode='host'>
+ <source dev='/dev/bus/usb/0/0'/>
+ <address type='ccid' controller='0' slot='0'/>
+ </smartcard>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml
new file mode 100644
index 0000000..f70395d
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml
@@ -0,0 +1,20 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory>219200</memory>
+ <currentMemory>219200</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <smartcard mode='host-certificates'>
+ <certificate>/etc/pki/cert1</certificate>
+ <certificate>/etc/pki/cert2</certificate>
+ <certificate>/etc/pki/cert3</certificate>
+ </smartcard>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml
new file mode 100644
index 0000000..faa2231
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml
@@ -0,0 +1,16 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory>219200</memory>
+ <currentMemory>219200</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <smartcard mode='host'/>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml
new file mode 100644
index 0000000..8e2fa52
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml
@@ -0,0 +1,19 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory>219200</memory>
+ <currentMemory>219200</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <smartcard mode='passthrough' type='tcp'>
+ <source mode='connect' host='127.0.0.1' service='2001'/>
+ <protocol type='raw'/>
+ </smartcard>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
--
1.7.3.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list