I am converting the shell-scripted tap tests to also run using the dash
shell, fixing some other problems on the way as well.
Two of the tests' data files contained '\\1' in an sed command. This
created char(1) with the dash, '\1' with the bash. I found it easier to
replace the sed command with a different one than figuring out how to
solve this escape problem so it works for both shells.
Signed-off-by: Stefan Berger <stefanb@xxxxxxxxxx>
---
scripts/networks/100-apply-verify-host.t | 9
scripts/networks/networkApplyTest.sh | 133 +++-----
scripts/networks/networkxml2hostout/tck-testnet-1.dat | 2
scripts/networks/networkxml2hostout/tck-testnet-2.dat | 2
scripts/nwfilter/050-apply-verify-host.t | 9
scripts/nwfilter/nwfilter2vmtest.sh | 298 ++++++++----------
6 files changed, 215 insertions(+), 238 deletions(-)
Index: libvirt-tck/scripts/networks/networkApplyTest.sh
===================================================================
--- libvirt-tck.orig/scripts/networks/networkApplyTest.sh
+++ libvirt-tck/scripts/networks/networkApplyTest.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
VIRSH=virsh
@@ -33,8 +33,8 @@ TAP_FAIL_LIST=""
TAP_FAIL_CTR=0
TAP_TOT_CTR=0
-function usage() {
- local cmd="$0"
+usage() {
+ cmd="$0"
cat <<EOF
Usage: ${cmd} [--help|-h|-?] [--noattach] [--wait] [--verbose]
[--libvirt-test] [--tap-test]
@@ -56,37 +56,37 @@ EOF
}
-function tap_fail() {
- echo "not ok $1 - ${2:0:66}"
- TAP_FAIL_LIST+="$1 "
- ((TAP_FAIL_CTR++))
- ((TAP_TOT_CTR++))
+tap_fail() {
+ txt=$(echo "$2" | gawk '{print substr($0,1,66)}')
+ echo "not ok $1 - ${txt}"
+ TAP_FAIL_LIST="$TAP_FAIL_LIST $1 "
+ TAP_FAIL_CTR=$((TAP_FAIL_CTR+1))
+ TAP_TOT_CTR=$((TAP_TOT_CTR+1))
}
-function tap_pass() {
- echo "ok $1 - ${2:0:70}"
- ((TAP_TOT_CTR++))
+tap_pass() {
+ txt=$(echo "$2" | gawk '{print substr($0,1,66)}')
+ echo "ok $1 - ${txt}"
+ TAP_TOT_CTR=$((TAP_TOT_CTR+1))
}
-function tap_final() {
- local okay
-
+tap_final() {
[ -n "${TAP_FAIL_LIST}" ] && echo "FAILED tests ${TAP_FAIL_LIST}"
okay=$(echo "($TAP_TOT_CTR-$TAP_FAIL_CTR)*100/$TAP_TOT_CTR" | bc -l)
- echo "Failed ${TAP_FAIL_CTR}/${TAP_TOT_CTR} tests, ${okay:0:5}% okay"
+ txt=$(echo $okay | gawk '{print substr($0,1,5)}')
+ echo "Failed ${TAP_FAIL_CTR}/${TAP_TOT_CTR} tests, ${txt}% okay"
}
# A wrapper for mktemp in case it does not exist
# Echos the name of a secure temporary directory.
-function mktmpdir() {
- local tmp
+mktmpdir() {
{
- tmp=$( (umask 077 && mktemp -d ./nwfvmtest.XXXXXX) 2>/dev/null) &&
+ tmp=$( (umask 077 && mktemp -d ./nwtst.XXXXXX) 2>/dev/null) &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./nwfvmtest$$-$RANDOM
+ tmp=./nwtst$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || { echo "failed to create secure temporary directory" >&2; exit 1; }
echo "${tmp}"
@@ -94,12 +94,11 @@ function mktmpdir() {
}
-function checkExpectedOutput() {
- local xmlfile="$1"
- local datafile="$2"
- local flags="$3"
- local skipregex="$4"
- local cmd line tmpdir tmpfile tmpfile2 skip
+checkExpectedOutput() {
+ xmlfile="$1"
+ datafile="$2"
+ flags="$3"
+ skipregex="$4"
tmpdir=$(mktmpdir)
tmpfile=$tmpdir/file
@@ -112,8 +111,8 @@ function checkExpectedOutput() {
exec 4<"${datafile}"
- read <&4
- line="${REPLY}"
+ IFS=""
+ read line <&4
while [ "x${line}x" != "xx" ]; do
cmd=$(echo "${line##\#}")
@@ -128,10 +127,11 @@ function checkExpectedOutput() {
: >"${tmpfile2}"
while :; do
- read <&4
- line="${REPLY}"
+ read line <&4
+
+ letter=$(echo ${line} | gawk '{print substr($1,1,1)}')
- if [ "${line:0:1}" == "#" ] || [ "x${line}x" == "xx" ]; then
+ if [ "x${letter}x" = "x#x" ] || [ "x${line}x" = "xx" ]; then
if [ ${skip} -ne 0 ]; then
break
@@ -144,18 +144,18 @@ function checkExpectedOutput() {
echo "FAIL ${xmlfile} : ${cmd}"
diff "${tmpfile}" "${tmpfile2}"
fi
- ((failctr++))
+ failctr=$((failctr+1))
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "tmp files: $tmpfile, $tmpfile2"
echo "Press enter"
- read
+ read enter
fi
[ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \
test_result $((passctr+failctr)) "" 1
[ $((flags & FLAG_TAP_TEST)) -ne 0 ] && \
tap_fail $((passctr+failctr)) "${xmlfile} : ${cmd}"
else
- ((passctr++))
+ passctr=$((passctr+1))
[ $((flags & FLAG_VERBOSE)) -ne 0 ] && \
echo "PASS ${xmlfile} : ${cmd}"
[ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \
@@ -177,12 +177,11 @@ function checkExpectedOutput() {
}
-function doTest() {
- local xmlfile="$1"
- local datafile="$2"
- local postdatafile="$3"
- local flags="$4"
- local netname
+doTest() {
+ xmlfile="$1"
+ datafile="$2"
+ postdatafile="$3"
+ flags="$4"
if [ ! -r "${xmlfile}" ]; then
echo "FAIL : Cannot access filter XML file ${xmlfile}."
@@ -205,24 +204,20 @@ function doTest() {
}
-function runTests() {
- local xmldir="$1"
- local hostoutdir="$2"
- local flags="$3"
- local datafiles f c
- local tap_total=0 ctr=0
-
- pushd "${PWD}" > /dev/null
- cd "${hostoutdir}"
- datafiles=$(ls *.dat)
- popd > /dev/null
+runTests() {
+ xmldir="$1"
+ hostoutdir="$2"
+ flags="$3"
+ tap_total=0 ctr=0
+
+ datafiles=$(cd "${hostoutdir}";ls *.dat)
if [ $((flags & FLAG_TAP_TEST)) -ne 0 ]; then
# Need to count the number of total tests
for fil in ${datafiles}; do
c=$(grep -c "^#" "${hostoutdir}/${fil}")
- ((tap_total+=c))
- ((ctr++))
+ tap_total=$((tap_total+c))
+ ctr=$((ctr+1))
done
echo "1..${tap_total}"
fi
@@ -250,22 +245,20 @@ function runTests() {
}
-function main() {
- local prgname="$0"
- local vm1 vm2
- local xmldir="networkxml2xmlin"
- local hostoutdir="networkxml2hostout"
- local res rc
- local flags
+main() {
+ prgname="$0"
+ xmldir="networkxml2xmlin"
+ hostoutdir="networkxml2hostout"
+ flags=0
while [ $# -ne 0 ]; do
case "$1" in
--help|-h|-\?) usage ${prgname}; exit 0;;
- --wait) ((flags |= FLAG_WAIT ));;
- --verbose) ((flags |= FLAG_VERBOSE ));;
- --libvirt-test) ((flags |= FLAG_LIBVIRT_TEST ));;
- --tap-test) ((flags |= FLAG_TAP_TEST ));;
- --force) ((flags |= FLAG_FORCE_CLEAN ));;
+ --wait) flags=$((flags | FLAG_WAIT ));;
+ --verbose) flags=$((flags | FLAG_VERBOSE ));;
+ --libvirt-test) flags=$((flags | FLAG_LIBVIRT_TEST ));;
+ --tap-test) flags=$((flags | FLAG_TAP_TEST ));;
+ --force) flags=$((flags | FLAG_FORCE_CLEAN ));;
*) usage ${prgname}; exit 1;;
esac
shift 1
@@ -290,8 +283,8 @@ function main() {
do
case ${name} in
tck*)
- if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" -o \
- $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
+ if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" ] || \
+ [ $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
res=$(virsh destroy ${name} 2>&1)
res=$(virsh undefine ${name} 2>&1)
if [ $? -ne 0 ]; then
@@ -309,8 +302,8 @@ function main() {
do
case ${name} in
tck*)
- if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" -o \
- $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
+ if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" ] || \
+ [ $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
res=$(virsh net-destroy ${name} 2>&1)
rc=$?
res=$(virsh net-undefine ${name} 2>&1)
@@ -327,13 +320,13 @@ function main() {
fi
if [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ]; then
- pushd "${PWD}" > /dev/null
+ curdir="${PWD}"
. ./test-lib.sh
if [ $? -ne 0 ]; then
exit 1
fi
test_intro $this_test
- popd > /dev/null
+ cd "${curdir}"
fi
res=$(${VIRSH} capabilities 2>&1)
Index: libvirt-tck/scripts/nwfilter/nwfilter2vmtest.sh
===================================================================
--- libvirt-tck.orig/scripts/nwfilter/nwfilter2vmtest.sh
+++ libvirt-tck/scripts/nwfilter/nwfilter2vmtest.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
ORIG_IFNAME="vnet0"
ATTACH_IFNAME="attach0"
@@ -6,17 +6,20 @@ TESTFILTERNAME="nwfiltertestfilter"
TESTVM2FWALLDATA="nwfilterxml2fwallout/testvm.fwall.dat"
VIRSH=virsh
-uri=
-if [ "x${LIBVIRT_TCK_CONFIG}x" != "xx" ]; then
- uri_exp=`cat ${LIBVIRT_TCK_CONFIG} | grep "^uri\s*=" | sed -e 's/uri\s*=\s*//' | tail -n 1`
- if [ "x${uri_exp}x" != "xx" ]; then
- eval "uri=${uri_exp}"
- fi
-else
- uri="qemu:///system"
-fi
-LIBVIRT_URI=${uri}
+# For each line starting with uri=, remove the prefix and set the hold
+# space to the rest of the line. Then at file end, print the hold
+# space, which is effectively the last uri= line encountered.
+uri=$(sed -n '/^uri[ ]*=[ ]*/ {
+ s///
+ h
+}
+$ {
+ x
+ p
+}' < "$LIBVIRT_TCK_CONFIG")
+: "${uri:=qemu:///system}"
+LIBVIRT_URI=${uri}
FLAG_WAIT="$((1<<0))"
FLAG_ATTACH="$((1<<1))"
@@ -34,8 +37,8 @@ TAP_FAIL_LIST=""
TAP_FAIL_CTR=0
TAP_TOT_CTR=0
-function usage() {
- local cmd="$0"
+usage() {
+ cmd="$0"
cat <<EOF
Usage: ${cmd} [--help|-h|-?] [--noattach] [--wait] [--verbose]
[--libvirt-test] [--tap-test]
@@ -60,66 +63,61 @@ EOF
}
-function tap_fail() {
- echo "not ok $1 - ${2:0:66}"
- TAP_FAIL_LIST+="$1 "
- ((TAP_FAIL_CTR++))
- ((TAP_TOT_CTR++))
+tap_fail() {
+ txt=$(echo "$2" | gawk '{print substr($0,1,66)}')
+ echo "not ok $1 - ${txt}"
+ TAP_FAIL_LIST="$TAP_FAIL_LIST $1 "
+ TAP_FAIL_CTR=$((TAP_FAIL_CTR+1))
+ TAP_TOT_CTR=$((TAP_TOT_CTR+1))
}
-function tap_pass() {
- echo "ok $1 - ${2:0:70}"
- ((TAP_TOT_CTR++))
+tap_pass() {
+ txt=$(echo "$2" | gawk '{print substr($0,1,70)}')
+ echo "ok $1 - ${txt}"
+ TAP_TOT_CTR=$((TAP_TOT_CTR+1))
}
-function tap_final() {
- local okay
-
+tap_final() {
[ -n "${TAP_FAIL_LIST}" ] && echo "FAILED tests ${TAP_FAIL_LIST}"
okay=`echo "($TAP_TOT_CTR-$TAP_FAIL_CTR)*100/$TAP_TOT_CTR" | bc -l`
- echo "Failed ${TAP_FAIL_CTR}/${TAP_TOT_CTR} tests, ${okay:0:5}% okay"
+ txt=$(echo $okay | gawk '{print substr($0,1,5)}')
+ echo "Failed ${TAP_FAIL_CTR}/${TAP_TOT_CTR} tests, ${txt}% okay"
}
# A wrapper for mktemp in case it does not exist
# Echos the name of a temporary file.
-function mktmpfile() {
- local tmp
- type -P mktemp > /dev/null
- if [ $? -eq 0 ]; then
- tmp=$(mktemp -t nwfvmtest.XXXXXX)
- echo ${tmp}
- else
- while :; do
- tmp="/tmp/nwfvmtest.${RANDOM}"
- if [ ! -f ${tmp} ]; then
- touch ${tmp}
- chmod 666 ${tmp}
- echo ${tmp}
- break
- fi
- done
- fi
+mktmpdir() {
+ {
+ tmp=$( (umask 077 && mktemp -d ./nwfvmtest.XXXXXX) 2>/dev/null) &&
+ test -n "$tmp" && test -d "$tmp"
+ } ||
+ {
+ tmp=./nwfvmtest$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+ } || { echo "failed to create secure temporary directory" >&2; exit 1; }
+ echo "${tmp}"
return 0
}
-function checkExpectedOutput() {
- local xmlfile="$1"
- local fwallfile="$2"
- local ifname="$3"
- local flags="$4"
- local skipregex="$5"
- local regex="s/${ORIG_IFNAME}/${ifname}/g"
- local cmd line tmpfile tmpfile2 skip
-
- tmpfile=`mktmpfile`
- tmpfile2=`mktmpfile`
+checkExpectedOutput() {
+ xmlfile="$1"
+ fwallfile="$2"
+ ifname="$3"
+ flags="$4"
+ skipregex="$5"
+ regex="s/${ORIG_IFNAME}/${ifname}/g"
+
+ tmpdir=$(mktmpdir)
+ tmpfile=$tmpdir/file
+ tmpfile2=$tmpdir/file2
exec 4<${fwallfile}
- read <&4
- line="${REPLY}"
+ IFS=""
+
+ read line <&4
while [ "x${line}x" != "xx" ]; do
cmd=`echo ${line##\#} | sed ${regex}`
@@ -135,10 +133,11 @@ function checkExpectedOutput() {
touch ${tmpfile2}
while [ 1 ]; do
- read <&4
- line="${REPLY}"
+ read line <&4
- if [ "${line:0:1}" == "#" ] || [ "x${line}x" == "xx" ]; then
+ letter=$(echo $line | gawk '{print substr($1,1,1)}')
+
+ if [ "x${letter}x" = "x#x" ] || [ "x${line}x" = "xx" ]; then
if [ ${skip} -ne 0 ]; then
break
@@ -151,18 +150,18 @@ function checkExpectedOutput() {
echo "FAIL ${xmlfile} : ${cmd}"
diff ${tmpfile} ${tmpfile2}
fi
- ((failctr++))
+ failctr=$((failctr+1))
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "tmp files: $tmpfile, $tmpfile2"
echo "Press enter"
- read
+ read enter
fi
[ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \
test_result $((passctr+failctr)) "" 1
[ $((flags & FLAG_TAP_TEST)) -ne 0 ] && \
tap_fail $((passctr+failctr)) "${xmlfile} : ${cmd}"
else
- ((passctr++))
+ passctr=$((passctr+1))
[ $((flags & FLAG_VERBOSE)) -ne 0 ] && \
echo "PASS ${xmlfile} : ${cmd}"
[ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \
@@ -180,19 +179,18 @@ function checkExpectedOutput() {
exec 4>&-
- rm -rf "${tmpfile}" "${tmpfile2}" 2>/dev/null
+ rm -rf "${tmpdir}"
}
-function doTest() {
- local xmlfile="$1"
- local fwallfile="$2"
- local vm1name="$3"
- local vm2name="$4"
- local flags="$5"
- local testnum="$6"
- local linenums ctr=0
- local tmpfile b msg rc
+doTest() {
+ xmlfile="$1"
+ fwallfile="$2"
+ vm1name="$3"
+ vm2name="$4"
+ flags="$5"
+ testnum="$6"
+ ctr=0
if [ ! -r "${xmlfile}" ]; then
echo "FAIL : Cannot access filter XML file ${xmlfile}."
@@ -209,7 +207,8 @@ function doTest() {
if [ $((flags & FLAG_ATTACH)) -ne 0 ]; then
- tmpfile=`mktmpfile`
+ tmpdir=$(mktmpdir)
+ tmpfile=$tmpdir/tmpfile
b=`{ ${VIRSH} dumpxml ${vm1name} | tr -d "\n"; echo; } | \
sed "s/.*\<interface.*source bridge='\([a-zA-Z0-9_]\+\)'.*<\/interface>.*/\1/"`
@@ -225,7 +224,7 @@ EOF
msg=`${VIRSH} attach-device "${vm1name}" "${tmpfile}" > /dev/null`
rc=$?
- ((attachctr++))
+ attachctr=$((attachctr+1))
if [ $rc -eq 0 ]; then
checkExpectedOutput "${xmlfile}" "${fwallfile}" "${ATTACH_IFNAME}" \
@@ -245,48 +244,45 @@ EOF
checkExpectedOutput "${TESTFILTERNAME}" "${TESTVM2FWALLDATA}" \
"${vm2name}" "${flags}" #"(PRE|POST)ROUTING"
fi
-
- ((attachfailctr++))
+
+ attachfailctr=$((attachfailctr+1))
if [ $((flags & FLAG_VERBOSE)) -ne 0 ]; then
echo "FAIL: Could not attach interface to vm ${vm1name}."
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter"
- read
+ read enter
fi
fi
fi
- rm -rf ${tmpfile}
+ rm -rf ${tmpdir}
fi
return 0
}
-function runTests() {
- local vm1name="$1"
- local vm2name="$2"
- local xmldir="$3"
- local fwalldir="$4"
- local flags="$5"
- local fwallfiles f c
- local tap_total=0 ctr=0
-
- pushd ${PWD} > /dev/null
- cd ${fwalldir}
- fwallfiles=`ls *.fwall`
- popd > /dev/null
+runTests() {
+ vm1name="$1"
+ vm2name="$2"
+ xmldir="$3"
+ fwalldir="$4"
+ flags="$5"
+ tap_total=0
+ ctr=0
+
+ fwallfiles=$(cd ${fwalldir}; ls *.fwall)
if [ $((flags & FLAG_TAP_TEST)) -ne 0 ]; then
# Need to count the number of total tests
for fil in ${fwallfiles}; do
c=$(grep -c "^#" ${fwalldir}/${fil})
- ((tap_total+=c))
- ((ctr++))
+ tap_total=$((tap_total+c))
+ ctr=$((ctr+1))
done
c=$(grep -c "^#" "${TESTVM2FWALLDATA}")
- ((tap_total+=c*ctr))
- [ $((flags & FLAG_ATTACH)) -ne 0 ] && ((tap_total*=2))
+ tap_total=$((tap_total+c*ctr))
+ [ $((flags & FLAG_ATTACH)) -ne 0 ] && tap_total=$((tap_total*2))
echo "1..${tap_total}"
fi
@@ -310,14 +306,14 @@ function runTests() {
}
-function createVM() {
- local vmname="$1"
- local filtername="$2"
- local ipaddr="$3"
- local macaddr="$4"
- local flags="$5"
- local res
- local tmpfile='mktmpfile'
+createVM() {
+ vmname="$1"
+ filtername="$2"
+ ipaddr="$3"
+ macaddr="$4"
+ flags="$5"
+ tmpdir=$(mktmpdir)
+ tmpfile=$tmpdir/tmpfile
cat > ${tmpfile} << EOF
<domain type='kvm'>
@@ -365,7 +361,7 @@ EOF
echo "Could not start VM ${vmname} : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
$(${VIRSH} undefine ${vmname})
return 1
@@ -373,23 +369,22 @@ EOF
[ $((flags & FLAG_VERBOSE)) -ne 0 ] && echo "Created VM ${vmname}."
- rm -rf ${tmpfile}
+ rm -rf ${tmpdir}
return 0
}
-function destroyVM() {
- local vmname="$1"
- local flags="$2"
- local res
+destroyVM() {
+ vmname="$1"
+ flags="$2"
res=$(${VIRSH} destroy ${vmname})
if [ $? -ne 0 ]; then
echo "Could not destroy VM ${vmname} : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
return 1
fi
@@ -399,7 +394,7 @@ function destroyVM() {
echo "Could not undefine VM ${vmname} : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
return 1
fi
@@ -410,10 +405,10 @@ function destroyVM() {
}
-function createTestFilters() {
- local flags="$1"
- local tmpfile=`mktmpfile`
- local res
+createTestFilters() {
+ flags="$1"
+ tmpdir=$(mktmpdir)
+ tmpfile=$tmpdir/tmpfile
cat >${tmpfile} << EOF
<filter name="${TESTFILTERNAME}">
@@ -433,9 +428,9 @@ EOF
echo "Could not define filter : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
- rm -rf ${tmpfile}
+ rm -rf ${tmpdir}
return 1
fi
@@ -448,28 +443,27 @@ EOF
echo "Could not define filter : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
- rm -rf ${tmpfile}
+ rm -rf ${tmpdir}
return 1
fi
- rm -rf ${tmpfile}
+ rm -rf ${tmpdir}
return 0
}
-function deleteTestFilter() {
- local flags="$1"
- local res
+deleteTestFilter() {
+ flags="$1"
res=$(${VIRSH} nwfilter-undefine ${TESTFILTERNAME} 2>&1)
if [ $? -ne 0 ]; then
echo "Could not undefine filter : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
return 1
fi
@@ -478,7 +472,7 @@ function deleteTestFilter() {
echo "Could not undefine filter : ${res}"
if [ $((flags & FLAG_WAIT)) -ne 0 ]; then
echo "Press enter."
- read
+ read enter
fi
return 1
fi
@@ -486,27 +480,25 @@ function deleteTestFilter() {
}
-function main() {
- local prgname="$0"
- local vm1 vm2
- local xmldir="nwfilterxml2xmlin"
- local fwalldir="nwfilterxml2fwallout"
- local found=0 vms res
- local filtername="tck-testcase"
- local libvirtdpid=-1
- local flags OPWD
+main() {
+ prgname="$0"
+ xmldir="nwfilterxml2xmlin"
+ fwalldir="nwfilterxml2fwallout"
+ found=0
+ filtername="tck-testcase"
+ libvirtdpid=-1
- ((flags=${FLAG_ATTACH}))
+ flags=${FLAG_ATTACH}
while [ $# -ne 0 ]; do
case "$1" in
--help|-h|-\?) usage ${prgname}; exit 0;;
- --noattach) ((flags &= ~FLAG_ATTACH ));;
- --wait) ((flags |= FLAG_WAIT ));;
- --verbose) ((flags |= FLAG_VERBOSE ));;
- --libvirt-test) ((flags |= FLAG_LIBVIRT_TEST ));;
- --tap-test) ((flags |= FLAG_TAP_TEST ));;
- --force) ((flags |= FLAG_FORCE_CLEAN ));;
+ --noattach) flags=$((flags & ~FLAG_ATTACH));;
+ --wait) flags=$((flags | FLAG_WAIT ));;
+ --verbose) flags=$((flags | FLAG_VERBOSE ));;
+ --libvirt-test) flags=$((flags | FLAG_LIBVIRT_TEST ));;
+ --tap-test) flags=$((flags | FLAG_TAP_TEST ));;
+ --force) flags=$((flags | FLAG_FORCE_CLEAN ));;
*) usage ${prgname}; exit 1;;
esac
shift 1
@@ -527,15 +519,17 @@ function main() {
exit 0
fi
- for name in `virsh list | awk '{print $2}'`
+ for name in `virsh list --all | awk '{print $2}'`
do
case ${name} in
tck*)
- if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" -o \
- $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
+ if [ "x${LIBVIRT_TCK_AUTOCLEAN}" = "x1" ] || \
+ [ $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
res=$(virsh destroy ${name} 2>&1)
+ rc1=$?
res=$(virsh undefine ${name} 2>&1)
- if [ $? -ne 0 ]; then
+ rc2=$?
+ if [ $rc1 -ne 0 ] && [ $rc2 -ne 0 ]; then
echo "Bail out! Could not undefine nwfiler ${name}: ${res}"
exit 0
fi
@@ -550,15 +544,15 @@ function main() {
do
case ${name} in
tck*)
- if [ "x${LIBVIRT_TCK_AUTOCLEAN}" == "x1" -o \
- $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
+ if [ "x${LIBVIRT_TCK_AUTOCLEAN}" = "x1" ] || \
+ [ $((flags & FLAG_FORCE_CLEAN)) -ne 0 ]; then
res=$(virsh nwfilter-undefine ${name} 2>&1)
if [ $? -ne 0 ]; then
- echo "Bail out! Could not undefine domain ${name}: ${res}"
+ echo "Bail out! Could not undefine filter ${name}: ${res}"
exit 1
fi
else
- echo "Bail out! Domain ${name} already exists, use --force to clean"
+ echo "Bail out! Filter ${name} already exists, use --force to clean"
exit 1
fi
esac
@@ -566,19 +560,19 @@ function main() {
fi
if [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ]; then
- pushd ${PWD} > /dev/null
+ curdir="${PWD}"
. test-lib.sh
if [ $? -ne 0 ]; then
exit 1
fi
test_intro $this_test
- popd > /dev/null
+ cd "${curdir}"
fi
res=$(${VIRSH} capabilities 2>&1)
- vm1="tck-testvm${RANDOM}"
- vm2="tck-testvm${RANDOM}"
+ vm1="tck-test$$1"
+ vm2="tck-test$$2"
createTestFilters "${flags}"
if [ $? -ne 0 ]; then
Index: libvirt-tck/scripts/networks/100-apply-verify-host.t
===================================================================
--- libvirt-tck.orig/scripts/networks/100-apply-verify-host.t
+++ libvirt-tck/scripts/networks/100-apply-verify-host.t
@@ -1,10 +1,5 @@
-#!/bin/bash
+#!/bin/sh
pwd=$(dirname $0)
-pushd ${PWD} > /dev/null
-
-cd ${pwd}
-bash ./networkApplyTest.sh --tap-test
-
-popd > /dev/null
+(cd ${pwd}; sh ./networkApplyTest.sh --tap-test)
Index: libvirt-tck/scripts/nwfilter/050-apply-verify-host.t
===================================================================
--- libvirt-tck.orig/scripts/nwfilter/050-apply-verify-host.t
+++ libvirt-tck/scripts/nwfilter/050-apply-verify-host.t
@@ -1,10 +1,5 @@
-#!/bin/bash
+#!/bin/sh
pwd=$(dirname $0)
-pushd ${PWD} > /dev/null
-
-cd ${pwd}
-bash ./nwfilter2vmtest.sh --tap-test --noattach
-
-popd > /dev/null
\ No newline at end of file
+(cd ${pwd}; sh ./nwfilter2vmtest.sh --tap-test --noattach)
Index: libvirt-tck/scripts/networks/networkxml2hostout/tck-testnet-1.dat
===================================================================
--- libvirt-tck.orig/scripts/networks/networkxml2hostout/tck-testnet-1.dat
+++ libvirt-tck/scripts/networks/networkxml2hostout/tck-testnet-1.dat
@@ -5,7 +5,7 @@ MASQUERADE all -- 10.1.2.0/24
#iptables -n -L FORWARD | grep ' 10\\.1\\.2\\.'
ACCEPT all -- 0.0.0.0/0 10.1.2.0/24 state RELATED,ESTABLISHED
ACCEPT all -- 10.1.2.0/24 0.0.0.0/0
-#ps aux | sed -n '/dnsmasq .*10\\.1\\.2\\./ s|.*\\(dnsmasq[[:print:]*]\\)|\\1|p'
+#ps aux | sed -n '/dnsmasq .*10\\.1\\.2\\./ s|.*dnsmasq|dnsmasq|p'
dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/tck-testnet.pid --conf-file= --listen-address 10.1.2.1 --except-interface lo --dhcp-range 10.1.2.2,10.1.2.254 --dhcp-lease-max=253 --dhcp-no-override
#route -n | grep '10\\.1\\.2\\.'
10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tck-testbr
Index: libvirt-tck/scripts/networks/networkxml2hostout/tck-testnet-2.dat
===================================================================
--- libvirt-tck.orig/scripts/networks/networkxml2hostout/tck-testnet-2.dat
+++ libvirt-tck/scripts/networks/networkxml2hostout/tck-testnet-2.dat
@@ -2,7 +2,7 @@
ACCEPT all -- 0.0.0.0/0 10.1.2.0/24
ACCEPT all -- 10.1.2.0/24 0.0.0.0/0
#iptables -t nat -L -n | grep ' 10\\.1\\.2\\.'
-#ps aux | sed -n '/dnsmasq .*10\\.1\\.2\\./ s|.*\\(dnsmasq[[:print:]*]\\)|\\1|p'
+#ps aux | sed -n '/dnsmasq .*10\\.1\\.2\\./ s|.*dnsmasq|dnsmasq|p'
dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/tck-testnet.pid --conf-file= --listen-address 10.1.2.1 --except-interface lo --dhcp-range 10.1.2.2,10.1.2.254 --dhcp-lease-max=253 --dhcp-no-override
#route -n | grep '10\\.1\\.2\\.'
10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tck-testbr
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list