Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN. Add the "little-endian" property to select the device endianness, defaulting to little endian. Set the proper endianness for each machine using the device. Reviewed-by: Richard Henderson <richard.henderson@xxxxxxxxxx> Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> --- hw/intc/xilinx_intc.c | 52 +++++++++++++++++------- hw/microblaze/petalogix_ml605_mmu.c | 1 + hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 + 3 files changed, 40 insertions(+), 14 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index 8fb6b4f1a5..fc55c8afca 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -3,6 +3,9 @@ * * Copyright (c) 2009 Edgar E. Iglesias. * + * https://docs.amd.com/v/u/en-US/xps_intc + * DS572: LogiCORE IP XPS Interrupt Controller (v2.01a) + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights @@ -49,6 +52,7 @@ struct XpsIntc { SysBusDevice parent_obj; + bool little_endian_model; MemoryRegion mmio; qemu_irq parent_irq; @@ -140,18 +144,29 @@ static void pic_write(void *opaque, hwaddr addr, update_irq(p); } -static const MemoryRegionOps pic_ops = { - .read = pic_read, - .write = pic_write, - .endianness = DEVICE_NATIVE_ENDIAN, - .impl = { - .min_access_size = 4, - .max_access_size = 4, +static const MemoryRegionOps pic_ops[2] = { + [0 ... 1] = { + .read = pic_read, + .write = pic_write, + .endianness = DEVICE_BIG_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .valid = { + /* + * All XPS INTC registers are accessed through the PLB interface. + * The base address for these registers is provided by the + * configuration parameter, C_BASEADDR. Each register is 32 bits + * although some bits may be unused and is accessed on a 4-byte + * boundary offset from the base address. + */ + .min_access_size = 4, + .max_access_size = 4, + }, }, - .valid = { - .min_access_size = 4, - .max_access_size = 4 - } + [0].endianness = DEVICE_BIG_ENDIAN, + [1].endianness = DEVICE_LITTLE_ENDIAN, }; static void irq_handler(void *opaque, int irq, int level) @@ -174,13 +189,21 @@ static void xilinx_intc_init(Object *obj) qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); - - memory_region_init_io(&p->mmio, obj, &pic_ops, p, "xlnx.xps-intc", - R_MAX * 4); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &p->mmio); } +static void xilinx_intc_realize(DeviceState *dev, Error **errp) +{ + XpsIntc *p = XILINX_INTC(dev); + + memory_region_init_io(&p->mmio, OBJECT(dev), + &pic_ops[p->little_endian_model], + p, "xlnx.xps-intc", + R_MAX * 4); +} + static Property xilinx_intc_properties[] = { + DEFINE_PROP_BOOL("little-endian", XpsIntc, little_endian_model, true), DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -189,6 +212,7 @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = xilinx_intc_realize; device_class_set_props(dc, xilinx_intc_properties); } diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c index d2b2109065..64e8cadbee 100644 --- a/hw/microblaze/petalogix_ml605_mmu.c +++ b/hw/microblaze/petalogix_ml605_mmu.c @@ -111,6 +111,7 @@ petalogix_ml605_init(MachineState *machine) dev = qdev_new("xlnx.xps-intc"); + qdev_prop_set_bit(dev, "little-endian", true); qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR); diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c index 8110be8371..af949196d3 100644 --- a/hw/microblaze/petalogix_s3adsp1800_mmu.c +++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c @@ -95,6 +95,7 @@ petalogix_s3adsp1800_init(MachineState *machine) 64 * KiB, 1, 0x89, 0x18, 0x0000, 0x0, 1); dev = qdev_new("xlnx.xps-intc"); + qdev_prop_set_bit(dev, "little-endian", !TARGET_BIG_ENDIAN); qdev_prop_set_uint32(dev, "kind-of-intr", 1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); -- 2.45.2
