The Xilinx 'ethlite' device was added in commit b43848a100 ("xilinx: Add ethlite emulation"), being only built back then for a big-endian MicroBlaze target (see commit 72b675caac "microblaze: Hook into the build-system"). I/O endianness access was then clarified in commit d48751ed4f ("xilinx-ethlite: Simplify byteswapping to/from brams"). Here the 'fix' was to use tswap32(). Since the machine was built as big-endian target, tswap32() use means the fix was for a little endian host. While the datasheet (reference added in file header) is not precise about it, we interpret such change as the device expects accesses in big-endian order. Besides, this is what other Xilinx/MicroBlaze devices use (see the 3 previous commits). Correct the MemoryRegionOps endianness. Add a 'access-little-endian' property, so if the bus access expect little-endian order we swap the values. Replace the tswap32() calls accordingly. Set the property on the single machine using this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> --- hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 + hw/net/xilinx_ethlite.c | 20 ++++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c index 8110be83715..8407dbee12a 100644 --- a/hw/microblaze/petalogix_s3adsp1800_mmu.c +++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c @@ -123,6 +123,7 @@ petalogix_s3adsp1800_init(MachineState *machine) qemu_configure_nic_device(dev, true, NULL); qdev_prop_set_uint32(dev, "tx-ping-pong", 0); qdev_prop_set_uint32(dev, "rx-ping-pong", 0); + qdev_prop_set_bit(dev, "access-little-endian", !TARGET_BIG_ENDIAN); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR); sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]); diff --git a/hw/net/xilinx_ethlite.c b/hw/net/xilinx_ethlite.c index ede7c172748..44ef11ebf89 100644 --- a/hw/net/xilinx_ethlite.c +++ b/hw/net/xilinx_ethlite.c @@ -3,6 +3,9 @@ * * Copyright (c) 2009 Edgar E. Iglesias. * + * DS580: https://docs.amd.com/v/u/en-US/xps_ethernetlite + * LogiCORE IP XPS Ethernet Lite Media Access Controller + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights @@ -25,7 +28,6 @@ #include "qemu/osdep.h" #include "qemu/module.h" #include "qom/object.h" -#include "exec/tswap.h" #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -65,6 +67,7 @@ struct xlx_ethlite NICState *nic; NICConf conf; + bool access_little_endian; uint32_t c_tx_pingpong; uint32_t c_rx_pingpong; unsigned int txbuf; @@ -103,9 +106,12 @@ eth_read(void *opaque, hwaddr addr, unsigned int size) break; default: - r = tswap32(s->regs[addr]); + r = s->regs[addr]; break; } + if (s->access_little_endian) { + bswap32s(&r); + } return r; } @@ -117,6 +123,10 @@ eth_write(void *opaque, hwaddr addr, unsigned int base = 0; uint32_t value = val64; + if (s->access_little_endian) { + bswap32s(&value); + } + addr >>= 2; switch (addr) { @@ -161,7 +171,7 @@ eth_write(void *opaque, hwaddr addr, break; default: - s->regs[addr] = tswap32(value); + s->regs[addr] = value; break; } } @@ -169,7 +179,7 @@ eth_write(void *opaque, hwaddr addr, static const MemoryRegionOps eth_ops = { .read = eth_read, .write = eth_write, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, .impl = { .min_access_size = 4, .max_access_size = 4, @@ -256,6 +266,8 @@ static void xilinx_ethlite_init(Object *obj) } static Property xilinx_ethlite_properties[] = { + DEFINE_PROP_BOOL("access-little-endian", struct xlx_ethlite, + access_little_endian, false), DEFINE_PROP_UINT32("tx-ping-pong", struct xlx_ethlite, c_tx_pingpong, 1), DEFINE_PROP_UINT32("rx-ping-pong", struct xlx_ethlite, c_rx_pingpong, 1), DEFINE_NIC_PROPERTIES(struct xlx_ethlite, conf), -- 2.45.2